On Sat, Mar 02, 2019 at 09:45:22AM +0000, Shiwanglai wrote:

[...]

> > +           /* Top internals */
> > +           funnel@ec031000 {
> > +                   compatible = "arm,coresight-funnel", "arm,primecell";
> > +                   reg = <0 0xec031000 0 0x1000>;
> > +                   clocks = <&crg_ctrl HI3660_PCLK>;
> > +                   clock-names = "apb_pclk";
> > +
> > +                   out-ports {
> > +                           port {
> > +                                   top_funnel_out: endpoint {
> > +                                           remote-endpoint =
> > +                                                   <&top_etf_in>;
> > +                                   };
> > +                           };
> > +                   };
> > +
> > +                   in-ports {
> > +                           #address-cells = <1>;
> > +                           #size-cells = <0>;
> > +
> > +                           port@0 {
> > +                                   reg = <0>;
> > +                                   top_funnel_in0: endpoint {
> > +                                           remote-endpoint =
> > +                                                   <&cluster0_etf_out>;
> > +                                   };
> > +                           };
> > +
> > +                           port@1 {
> > +                                   reg = <0>;
> 
> Here should s/<0>/<1>; otherwise DTC will complain warning for mismatching 
> between 'port@1' and 'reg = <0>'.

> -- if reg set to 1, then there's no data output from cluster 1 to top.

Thanks for the info, Wanglai.  Now I see why write as it is.

I can confirm if directly use your patch with perf with mainline
kernel I can capture CoreSight trace data successfully on Hikey960
board.

But since this DT binding will introduce DTC warning, I personally
think we can improve for this with below method:

We can create a funnel node named "funnel_combo", and we don't need to
specify register address range for it; and cluster 0 and cluster 1 will
output to "funnel_combo" and "funnel_combo" will output to the top
funnel.  Thus the DT binding will write as below.

To support for a funnel without any register address range (we have
support replicator like this mode), we also need to extend the driver
drivers/hwtracing/coresight/coresight-funnel.c.

Mathieu, Mike, Suzuki, could you help confirm this is the right
direction we should move forward to?

---8<---
        /* An invisible combo funnel between clusters and top funnel */
        funnel_combo {
                compatible = "arm,coresight-funnel";
                clocks = <&crg_ctrl HI3660_PCLK>;
                clock-names = "apb_pclk";

                out-ports {
                        port {
                                combo_funnel_out: endpoint {
                                        remote-endpoint =
                                                <&top_funnel_in>;
                                };
                        };
                };

                in-ports {
                        #address-cells = <1>;
                        #size-cells = <0>;

                        port@0 {
                                reg = <0>;
                                combo_funnel_in0: endpoint {
                                        remote-endpoint =
                                                <&cluster0_etf_out>;
                                };
                        };

                        port@1 {
                                reg = <1>;
                                combo_funnel_in1: endpoint {
                                        remote-endpoint =
                                                <&cluster1_etf_out>;
                                };
                        };
                };
        };

        /* Top internals */
        funnel@ec031000 {
                compatible = "arm,coresight-funnel", "arm,primecell";
                reg = <0 0xec031000 0 0x1000>;
                clocks = <&crg_ctrl HI3660_PCLK>;
                clock-names = "apb_pclk";

                out-ports {
                        port {
                                top_funnel_out: endpoint {
                                        remote-endpoint =
                                                <&top_etf_in>;
                                };
                        };
                };

                in-ports {
                        #address-cells = <1>;
                        #size-cells = <0>;

                        port@0 {
                                reg = <0>;
                                top_funnel_in: endpoint {
                                        remote-endpoint =
                                                <&combo_funnel_out>;
                                };
                        };
                };
        };

--->8---

[...]

Thanks,
Leo Yan

Reply via email to