Hi, Stefan Anson Huang Best Regards!
> -----Original Message----- > From: Stefan Wahren <[email protected]> > Sent: Tuesday, September 18, 2018 3:38 PM > To: Anson Huang <[email protected]>; [email protected]; > [email protected]; [email protected]; [email protected]; > [email protected]; Fabio Estevam <[email protected]>; > [email protected]; [email protected]; [email protected]; Jacky > Bai <[email protected]>; A.s. Dong <[email protected]>; > [email protected]; [email protected]; > [email protected]; [email protected] > Cc: dl-linux-imx <[email protected]> > Subject: Re: [PATCH 0/4] Add i.MX6ULZ SoC support > > Hi Anson, > > Am 18.09.2018 um 08:19 schrieb Anson Huang: > > This patch set adds i.MX6ULZ SoC support, i.MX6ULZ is a new SoC of > > i.MX6 family, compared to i.MX6ULL, it removes below modules: > > > > - UART5/UART6/UART7/UART8; > > - PWM5/PWM6/PWM7/PWM8; > > - eCSPI3/eCSPI4; > > - CAN1/CAN2; > > - FEC1/FEC2; > > - I2C3/I2C4; > > - EPIT2; > > - LCDIF; > > - GPT2; > > - TSC; > > > > And i.MX6ULZ has same soc_id as i.MX6ULL, but SRC_SBMR2 bit[6] is to > > differentiate i.MX6ULZ from i.MX6ULL, 1'b1 means i.MX6ULZ and > > 1'b0 means i.MX6ULL. i.MX6ULZ reuse most of i.MX6UL/i.MX6ULL code, > > just add the new CPU type and remove those non-exist modules from dtb. > > > > Anson Huang (4): > > ARM: dts: imx: add i.mx6ulz and i.mx6ulz 14x14 evk support > > ARM: imx: add i.mx6ulz msl support > > clk: imx6ul: add i.mx6ulz support > > dt-bindings: arm: add compatible for i.MX6ULZ 14x14 EVK board > > > > > > i recommend the following patch order: > ARM: imx: add i.mx6ulz msl support > clk: imx6ul: add i.mx6ulz support > dt-bindings: arm: add compatible for i.MX6ULZ 14x14 EVK board > ARM: dts: imx: add i.mx6ulz and i.mx6ulz 14x14 evk support > > Stefan Thanks, I resend the V2 patch set with the patch order you recommended. Anson.
