Signed-off-by: Oleksij Rempel <[email protected]>
---
 .../devicetree/bindings/remoteproc/imx-rproc.txt   | 44 ++++++++++++++++++++++
 1 file changed, 44 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/imx-rproc.txt

diff --git a/Documentation/devicetree/bindings/remoteproc/imx-rproc.txt 
b/Documentation/devicetree/bindings/remoteproc/imx-rproc.txt
new file mode 100644
index 000000000000..e7c61993e1b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/imx-rproc.txt
@@ -0,0 +1,44 @@
+NXP iMX6SX/iMX7D Co-Processor Bindings
+----------------------------------------
+
+This binding provides support for ARM Cortex M4 Co-processor found on some
+NXP iMX SoCs.
+
+Required properties:
+- compatible           Should be one of:
+                               "fsl,imx7d-rproc"
+                               "fsl,imx6sx-rproc"
+- clocks               Clock for co-processor (See: 
../clock/clock-bindings.txt)
+- syscfg               Phandle to syscon block which provide access to
+                       System Reset Controller
+
+Optional properties:
+- reg:                 Should contain the address ranges for some of internal
+                       memory regions.
+- reg-names:           Contains the corresponding names for the memory
+                       regions. These should be named "ddr", "ocram", 
"ocram-s",
+                       "ocram-epdc" or "ocram-pxp".
+Fallowing memory ranges are expected:
+- For "fsl,imx7d-rproc"
+       <0x00900000 0x00020000> - "ocram"
+       <0x00920000 0x00020000> - "ocram-epdc"
+       <0x00940000 0x00008000> - "ocram-pxp"
+       <0x80000000 0x0FFF0000> - "ddr" (code area)
+       <0x80000000 0x60000000> - "ddr" (data area)
+- For "fsl,imx6sx-rproc"
+       <0x008F8000 0x00004000> - "ocram-s"
+       <0x80000000 0x0FFF8000> - "ddr" (code area)
+       <0x80000000 0x60000000> - "ddr" (data area)
+
+Note: the "ddr" code and data ranges are overlapping. Code area is smaller
+than data area.  So this range should be carefully chosen according to your
+system and application requirements.
+
+Example:
+       imx_rproc: imx7d-rp0@0 {
+               compatible      = "fsl,imx7d-rproc";
+               reg             = <0x80000000 0x80000>, <0x00900000 0x2000>;
+               reg-names       = "ddr", "ocram";
+               syscon          = <&src>;
+               clocks          = <&clks IMX7D_ARM_M4_ROOT_CLK>;
+       };
-- 
2.11.0

Reply via email to