Hi Florian, You should use the board name in the topic, ie: "ARM: dts: armada-385-linksys: Utilize new DSA binding"
Thanks, Gregory On lun., janv. 02 2017, Florian Fainelli <[email protected]> wrote: > Utilize the new DSA binding, introduced with commit 8c5ad1d6179d ("net: dsa: > Document new binding"). The legacy binding node is kept included, but is > marked > disabled. > > Signed-off-by: Florian Fainelli <[email protected]> > --- > arch/arm/boot/dts/armada-385-linksys.dtsi | 52 > ++++++++++++++++++++++++++++++- > 1 file changed, 51 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi > b/arch/arm/boot/dts/armada-385-linksys.dtsi > index 8f0e508f64ae..20d5e8b00f2d 100644 > --- a/arch/arm/boot/dts/armada-385-linksys.dtsi > +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi > @@ -103,8 +103,56 @@ > }; > }; > > - mdio { > + mdio@72004 { > status = "okay"; > + > + switch@0 { > + compatible = "marvell,mv88e6095"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + label = "lan4"; > + }; > + > + port@1 { > + reg = <1>; > + label = "lan3"; > + }; > + > + port@2 { > + reg = <2>; > + label = "lan2"; > + }; > + > + port@3 { > + reg = <3>; > + label = "lan1"; > + }; > + > + port@4 { > + reg = <4>; > + label = "wan"; > + }; > + > + port@5 { > + reg = <5>; > + label = "cpu"; > + ethernet = <ð2>; > + > + fixed-link { > + speed = <1000>; > + full-duplex; > + }; > + }; > + }; > + }; > }; > > sata@a8000 { > @@ -261,6 +309,8 @@ > }; > > dsa@0 { > + status = "disabled"; > + > compatible = "marvell,dsa"; > #address-cells = <2>; > #size-cells = <0>; > -- > 2.9.3 > -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
