On 2016-03-31 01:33, Shawn Guo wrote:
> On Wed, Mar 09, 2016 at 06:16:45PM -0800, Stefan Agner wrote:
>> Add Vybrids massive on-chip SRAM areas. Make use of the memory
>> region functionality to denominate the retained SRAM area in
>> LPSTOP2 and LPSTOP3.
>>
>> Signed-off-by: Stefan Agner <[email protected]>
>
> This one looks fine to me. I was going to pick it up separately, but it
> doesn't apply.
... see below
>> ---
>> arch/arm/boot/dts/vfxxx.dtsi | 37 +++++++++++++++++++++++++++++++++++++
>> 1 file changed, 37 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
>> index 909988d..b038ea4 100644
>> --- a/arch/arm/boot/dts/vfxxx.dtsi
>> +++ b/arch/arm/boot/dts/vfxxx.dtsi
>> @@ -91,6 +91,43 @@
>> interrupt-parent = <&gpc>;
I guess this gpc interrupt parent causes the apply problem. I will move
this patch to the top so it can be applied before the GPC driver and dt
changes.
--
Stefan
>> ranges;
>>
>> + ocram0: sram@3f000000 {
>> + compatible = "mmio-sram";
>> + reg = <0x3f000000 0x40000>;
>> +
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges = <0 0x3f000000 0x40000>;
>> +
>> + stbyram1@0 {
>> + reg = <0x0 0x4000>;
>> + label = "stbyram1";
>> + pool;
>> + };
>> +
>> + stbyram2@4000 {
>> + reg = <0x4000 0xc000>;
>> + label = "stbyram2";
>> + pool;
>> + };
>> + };
>> +
>> + ocram1: sram@3f040000 {
>> + compatible = "mmio-sram";
>> + reg = <0x3f040000 0x40000>;
>> + };
>> +
>> + gfxram0: sram@3f400000 {
>> + compatible = "mmio-sram";
>> + reg = <0x3f400000 0x80000>;
>> + };
>> +
>> + /* used by L2 cache */
>> + gfxram1: sram@3f480000 {
>> + compatible = "mmio-sram";
>> + reg = <0x3f480000 0x80000>;
>> + };
>> +
>> aips0: aips-bus@40000000 {
>> compatible = "fsl,aips-bus", "simple-bus";
>> #address-cells = <1>;
>> --
>> 2.7.2
>>
>>
