Jarryd Beck wrote:
>> I think that the tda18271 driver will work with your tuner, but we may
>> need to make some small adjustments. If you look in tda18271-fe.c ,
>> you'll find the code that autodetects between a TDA18271c1 and a
>> TDA18271c2 ...
>>
>
> [snip]
>
> Also if I could somehow get this working with the right
> code, I don't know how to set up the values in the tda182171_config
> struct.
>
Jarryd,
Assuming that there is no tda829x analog demod present, and that this is
a digital-only device, try something like this:
static struct tda18271_config jarryd_tda18271_config = {
.gate = TDA18271_GATE_DIGITAL
}
You should leave .std_map as NULL unless you need to override the default
values per standard.
The value in the ".std_bits" corresponds to the lower five bits in EP3
(register 0x05 [4:0])
Most likely, the driver's default setting will work for you, but you
may find that the vendor chose a different value if you sniff the usb
traffic from the windows driver. This value is directly tied to the IF
frequency between the tuner and demod.
-Mike Krufky
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
