On Mon, Aug 25, 2025 at 05:53:53PM +0200, Luca Weiss wrote:
> Hi Dmitry,
>
> On Wed Aug 20, 2025 at 1:52 PM CEST, Dmitry Baryshkov wrote:
> > On Wed, Aug 20, 2025 at 10:42:09AM +0200, Luca Weiss wrote:
> >> Hi Konrad,
> >>
> >> On Sat Aug 2, 2025 at 2:04 PM CEST, Konrad Dybcio wrote:
> >> > On 7/29/25 8:49 AM, Luca Weiss wrote:
> >> >> Hi Konrad,
> >> >>
> >> >> On Thu Jul 17, 2025 at 11:46 AM CEST, Luca Weiss wrote:
> >> >>> Hi Konrad,
> >> >>>
> >> >>> On Thu Jul 17, 2025 at 10:29 AM CEST, Luca Weiss wrote:
> >> >>>> On Mon Jul 14, 2025 at 1:06 PM CEST, Konrad Dybcio wrote:
> >> >>>>> On 7/13/25 10:05 AM, Luca Weiss wrote:
> >> >>>>>> Add a devicetree description for the Milos SoC, which is for example
> >> >>>>>> Snapdragon 7s Gen 3 (SM7635).
> >> >>>>>>
> >> >>>>>> Signed-off-by: Luca Weiss <luca.we...@fairphone.com>
> >> >>>>>> ---
> >> >>>>>
> >> >>>>> [...]
> >> >>>>>> +
> >> >>>>>> + spmi_bus: spmi@c400000 {
> >> >>>>>> + compatible = "qcom,spmi-pmic-arb";
> >> >>>>>
> >> >>>>> There's two bus instances on this platform, check out the x1e binding
> >> >>>>
> >> >>>> Will do
> >> >>>
> >> >>> One problem: If we make the labels spmi_bus0 and spmi_bus1 then we
> >> >>> can't
> >> >>> reuse the existing PMIC dtsi files since they all reference &spmi_bus.
> >> >>>
> >> >>> On FP6 everything's connected to PMIC_SPMI0_*, and PMIC_SPMI1_* is not
> >> >>> connected to anything so just adding the label spmi_bus on spmi_bus0
> >> >>> would be fine.
> >> >>>
> >> >>> Can I add this to the device dts? Not going to be pretty though...
> >> >>>
> >> >>> diff --git a/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
> >> >>> b/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
> >> >>> index d12eaa585b31..69605c9ed344 100644
> >> >>> --- a/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
> >> >>> +++ b/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
> >> >>> @@ -11,6 +11,9 @@
> >> >>> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
> >> >>> #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> >> >>> #include "milos.dtsi"
> >> >>> +
> >> >>> +spmi_bus: &spmi_bus0 {};
> >> >>> +
> >> >>> #include "pm7550.dtsi"
> >> >>> #include "pm8550vs.dtsi"
> >> >>> #include "pmiv0104.dtsi" /* PMIV0108 */
> >> >>>
> >> >>> Or I can add a second label for the spmi_bus0 as 'spmi_bus'. Not sure
> >> >>> other designs than SM7635 recommend using spmi_bus1 for some stuff.
> >> >>>
> >> >>> But I guess longer term we'd need to figure out a solution to this, how
> >> >>> to place a PMIC on a given SPMI bus, if reference designs start to
> >> >>> recommend putting different PMIC on the separate busses.
> >> >>
> >> >> Any feedback on this regarding the spmi_bus label?
> >> >
> >> > I had an offline chat with Bjorn and we only came up with janky
> >> > solutions :)
> >> >
> >> > What you propose works well if the PMICs are all on bus0, which is
> >> > not the case for the newest platforms. If some instances are on bus0
> >> > and others are on bus1, things get ugly really quick and we're going
> >> > to drown in #ifdefs.
> >> >
> >> >
> >> > An alternative that I've seen downstream is to define PMIC nodes in
> >> > the root of a dtsi file (not in the root of DT, i.e. NOT under / { })
> >> > and do the following:
> >> >
> >> > &spmi_busN {
> >> > #include "pmABCDX.dtsi"
> >> > };
> >> >
> >> > Which is "okay", but has the visible downside of having to define the
> >> > temp alarm thermal zone in each board's DT separately (and doing
> >> > mid-file includes which is.. fine I guess, but also something we avoided
> >> > upstream for the longest time)
> >> >
> >> >
> >> > Both are less than ideal when it comes to altering the SID under
> >> > "interrupts", fixing that would help immensely. We were hoping to
> >> > leverage something like Johan's work on drivers/mfd/qcom-pm8008.c,
> >> > but that seems like a longer term project.
> >> >
> >> > Please voice your opinions
> >>
> >> Since nobody else jumped in, how can we continue?
> >>
> >> One janky solution in my mind is somewhat similar to the PMxxxx_SID
> >> defines, doing something like "#define PM7550_SPMI spmi_bus0" and then
> >> using "&PM7550_SPMI {}" in the dtsi. I didn't try it so not sure that
> >> actually works but something like this should I imagine.
> >>
> >> But fortunately my Milos device doesn't have the problem that it
> >> actually uses both SPMI busses for different PMICs, so similar to other
> >> SoCs that already have two SPMI busses, I could somewhat ignore the
> >> problem and let someone else figure out how to actually place PMICs on
> >> spmi_bus0 and spmi_bus1 if they have such a hardware.
> >
> > I'd say, ignore it for now.
>
> You mean ignoring that there's a second SPMI bus on this SoC, and just
> modelling one with the label "spmi_bus"? Or something else?
>
>
> I have also actually tried out the C define solution that I was writing
> about in my previous email and this is actually working, see diff below.
> In my opinion it just expands on what we have with the SID defines, so
> shouldn't be tooo unacceptable :)
I think we tried previously using C preprocessor to rework SID handling
and it wasn't accepted by DT maintainers.
I'd say, ignore the second bus for now, unless it gets actually used for
major PMICs.
--
With best wishes
Dmitry
