You have been subscribed to a public bug:

Dear developers,
I have a Icybox 4 HDD enclosure with a JMicrom JMS567 SATA to USB converter. 
When the device is under load and more than 1 hardrive is acessed, the USB 
enclosure frequently restarts. This leaves often a corrup filesystem. I tried 
to switch off UAS by creating a file in /etc/modprobe.d/blacklist_uas.conf with 
the following content:
options usb-storage quirks=152d:0567:u
This disables UAS, and I did not exerinecs restarts of the box. But of course 
thios laves only USB speeds on the USB3 connector, which is quite slow.
I think this suggest this is a kernel bug and not a hardware issues.
I aasume the problem is in the linux-image-4.15.0-33-generic package.
Similar has been reported:
https://www.spinics.net/lists/linux-usb/msg157550.html  
Any help would be greatly appreciated.
Best regards
Michael

lsusb -vvv -s 003:004

Bus 003 Device 004: ID 152d:0567 JMicron Technology Corp. / JMicron USA 
Technology Corp. JMS567 SATA 6Gb/s bridge
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         9
  idVendor           0x152d JMicron Technology Corp. / JMicron USA Technology 
Corp.
  idProduct          0x0567 JMS567 SATA 6Gb/s bridge
  bcdDevice            2.05
  iManufacturer          10 
  iProduct               11 
  iSerial                 5 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           44
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xc0
      Self Powered
    MaxPower                2mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk-Only
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst              15
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst              15
res3stockm@brix:~$ lsb_release -rd
Description:    Ubuntu 18.04.1 LTS
Release:        18.04

** Affects: linux (Ubuntu)
     Importance: Undecided
         Status: New

-- 
USB-SATA resets when UAS is used
https://bugs.launchpad.net/bugs/1789589
You received this bug notification because you are a member of Kernel Packages, 
which is subscribed to linux in Ubuntu.

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to     : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

Reply via email to