This bug was fixed in the package linux - 4.2.0-21.25
---------------
linux (4.2.0-21.25) wily; urgency=low
[ Luis Henriques ]
* Release Tracking Bug
- LP: #1522108
[ Upstream Kernel Changes ]
* staging/dgnc: fix info leak in ioctl
- LP: #1509565
- CVE-2015-7885
* [media] media/vivid-osd: fix info leak in ioctl
- LP: #1509564
- CVE-2015-7884
* KEYS: Fix race between key destruction and finding a keyring by name
- LP: #1508856
- CVE-2015-7872
* KEYS: Fix crash when attempt to garbage collect an uninstantiated
keyring
- LP: #1508856
- CVE-2015-7872
* KEYS: Don't permit request_key() to construct a new keyring
- LP: #1508856
- CVE-2015-7872
* isdn_ppp: Add checks for allocation failure in isdn_ppp_open()
- LP: #1508329
- CVE-2015-7799
* ppp, slip: Validate VJ compression slot parameters completely
- LP: #1508329
- CVE-2015-7799
linux (4.2.0-20.24) wily; urgency=low
[ Brad Figg ]
* Release Tracking Bug
- LP: #1521753
[ Andy Whitcroft ]
* [Tests] gcc-multilib does not exist on ppc64el
- LP: #1515541
[ Joseph Salisbury ]
* SAUCE: scsi_sysfs: protect against double execution of
__scsi_remove_device()
- LP: #1509029
[ Manoj Kumar ]
* SAUCE: (noup) cxlflash: Fix to escalate LINK_RESET also on port 1
- LP: #1513583
[ Matthew R. Ochs ]
* SAUCE: (noup) cxlflash: Fix to avoid virtual LUN failover failure
- LP: #1513583
[ Oren Givon ]
* SAUCE: (noup) iwlwifi: Add new PCI IDs for the 8260 series
- LP: #1517375
[ Seth Forshee ]
* [Config] CONFIG_DRM_AMDGPU_CIK=n
- LP: #1510405
[ Upstream Kernel Changes ]
* net/mlx5e: Disable VLAN filter in promiscuous mode
- LP: #1514861
* drivers: net: xgene: fix RGMII 10/100Mb mode
- LP: #1433290
* HID: rmi: Disable scanning if the device is not a wake source
- LP: #1515503
* HID: rmi: Set F01 interrupt enable register when not set
- LP: #1515503
* net/mlx5e: Ethtool link speed setting fixes
- LP: #1517919
* scsi_scan: don't dump trace when scsi_prep_async_scan() is called twice
- LP: #1517942
* x86/ioapic: Disable interrupts when re-routing legacy IRQs
- LP: #1508593
* xhci: Workaround to get Intel xHCI reset working more reliably
* megaraid_sas: Do not use PAGE_SIZE for max_sectors
- LP: #1475166
* net: usb: cdc_ether: add Dell DW5580 as a mobile broadband adapter
- LP: #1513847
* KVM: svm: unconditionally intercept #DB
- LP: #1520184
- CVE-2015-8104
-- Luis Henriques <luis.henriq...@canonical.com> Wed, 02 Dec 2015
17:30:58 +0000
** Changed in: linux (Ubuntu Wily)
Status: Fix Committed => Fix Released
** CVE added: http://www.cve.mitre.org/cgi-
bin/cvename.cgi?name=2015-7799
** CVE added: http://www.cve.mitre.org/cgi-
bin/cvename.cgi?name=2015-7872
** CVE added: http://www.cve.mitre.org/cgi-
bin/cvename.cgi?name=2015-7884
** CVE added: http://www.cve.mitre.org/cgi-
bin/cvename.cgi?name=2015-7885
** CVE added: http://www.cve.mitre.org/cgi-
bin/cvename.cgi?name=2015-8104
** Changed in: linux (Ubuntu Vivid)
Status: Fix Committed => Fix Released
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1475166
Title:
Ubuntu 15.04 Install Error with Avago Controller
Status in linux package in Ubuntu:
Invalid
Status in linux source package in Vivid:
Fix Released
Status in linux source package in Wily:
Fix Released
Bug description:
Hello Canonical Team
We are running to an issue installing ubuntu PPC64LE 15.04 full blown
image on our servers (with RAID controller). Installation hangs
around 70% of progress.
An important part of our configuration is Avago RAID controller:
9361-8i Firmware version we used is 4.300.00-4429, and the package is
24.10.0-0002.
IMPORTANT: It has to be noted that with same hardware configuration
14.10 full blown image installs fine.
Dmesg logs are attached:
Looking at dmesg logs point out that:
LSI (avago) driver loads fine
During further interaction with raid volume during the installation process,
firmware errors are seen
[ 196.991417] megasas: FW status 0x3
[ 196.999376] megasas: FW status 0x3
[ 197.007376] megasas: FW status 0x3
Further down the process I/O errors are thrown
[ 217.438664] Buffer I/O error on device sda2, logical block 22052864
[ 217.438671] Buffer I/O error on device sda2, logical block 22052865
[ 217.438678] Buffer I/O error on device sda2, logical block 22052866
[ 217.438686] Buffer I/O error on device sda2, logical block 22052867
Full dmesg log is attached. Snippet is pasted below highlighting:
It can be noted that there’s a Mellanox Connectx 3 pro card with some test
Firmware on our setup.
We can Ignore any diagnostic messages from that card in dmesg logs for the
purpose of this bug.
Thanks
Adi Gangidi
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1475166/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
