This bug is awaiting verification that the kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed- vivid' to 'verification-done-vivid'.
If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you! ** Tags added: verification-needed-vivid ** Tags added: verification-needed-wily -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1475166 Title: Ubuntu 15.04 Install Error with Avago Controller Status in linux package in Ubuntu: Invalid Status in linux source package in Vivid: Fix Committed Status in linux source package in Wily: Fix Committed Bug description: Hello Canonical Team We are running to an issue installing ubuntu PPC64LE 15.04 full blown image on our servers (with RAID controller). Installation hangs around 70% of progress. An important part of our configuration is Avago RAID controller: 9361-8i Firmware version we used is 4.300.00-4429, and the package is 24.10.0-0002. IMPORTANT: It has to be noted that with same hardware configuration 14.10 full blown image installs fine. Dmesg logs are attached: Looking at dmesg logs point out that: LSI (avago) driver loads fine During further interaction with raid volume during the installation process, firmware errors are seen [ 196.991417] megasas: FW status 0x3 [ 196.999376] megasas: FW status 0x3 [ 197.007376] megasas: FW status 0x3 Further down the process I/O errors are thrown [ 217.438664] Buffer I/O error on device sda2, logical block 22052864 [ 217.438671] Buffer I/O error on device sda2, logical block 22052865 [ 217.438678] Buffer I/O error on device sda2, logical block 22052866 [ 217.438686] Buffer I/O error on device sda2, logical block 22052867 Full dmesg log is attached. Snippet is pasted below highlighting: It can be noted that there’s a Mellanox Connectx 3 pro card with some test Firmware on our setup. We can Ignore any diagnostic messages from that card in dmesg logs for the purpose of this bug. Thanks Adi Gangidi To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1475166/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
