>-----Original Message----- >From: Navare, Manasi D >Sent: Wednesday, May 23, 2018 9:47 AM >To: Srivatsa, Anusha <[email protected]> >Cc: [email protected]; Zanoni, Paulo R <[email protected]> >Subject: Re: [Intel-gfx] [PATCH] drm/i915/icl: Add remaining registers and >bitfields for MG PHY DDI > >On Tue, May 22, 2018 at 11:04:57PM -0700, Srivatsa, Anusha wrote: >> >> >> >-----Original Message----- >> >From: Intel-gfx [mailto:[email protected]] On >> >Behalf Of Manasi Navare >> >Sent: Tuesday, May 15, 2018 5:53 PM >> >To: [email protected] >> >Cc: Zanoni, Paulo R <[email protected]> >> >Subject: [Intel-gfx] [PATCH] drm/i915/icl: Add remaining registers >> >and bitfields for MG PHY DDI >> > >> >This patch adds the remaining register definitions and bit fields >> >required for MG PHy DDI buffer initializations and voltage swing >> >programming for MG PHy DDI ports. >> > >> >While at it this patch also fixes the naming for previously defined >> >MG PHY registers in original commit id (c92f47b5ec977a "drm/i915/icl: >> >Add register defs for voltage swing sequences for MG PHY DDI"). >> >Since the MG PHY registers are first defined in ICL platform, there >> >is no need for _ICL prefix. >> > >> >Signed-off-by: Manasi Navare <[email protected]> >> >Cc: Paulo Zanoni <[email protected]> >> >Cc: James Ausmus <[email protected]> >> >--- >> > drivers/gpu/drm/i915/i915_reg.h | 243 >> >+++++++++++++++++++++++---------------- >> >- >> > 1 file changed, 142 insertions(+), 101 deletions(-) >> > >> >diff --git a/drivers/gpu/drm/i915/i915_reg.h >> >b/drivers/gpu/drm/i915/i915_reg.h index f11bb21..a93b796 100644 >> >--- a/drivers/gpu/drm/i915/i915_reg.h >> >+++ b/drivers/gpu/drm/i915/i915_reg.h >> >@@ -1827,121 +1827,162 @@ enum i915_power_well_id { >> > #define N_SCALAR(x) ((x) << 24) >> > #define N_SCALAR_MASK (0x7F << 24) >> > >> >-#define _ICL_MG_PHY_PORT_LN(port, ln, ln0p1, ln0p2, ln1p1) \ >> >+#define MG_PHY_PORT_LN(port, ln, ln0p1, ln0p2, ln1p1) \ >> > _MMIO(_PORT((port) - PORT_C, ln0p1, ln0p2) + (ln) * ((ln1p1) - >> > (ln0p1))) >> > >> >-#define _ICL_MG_TX_LINK_PARAMS_TX1LN0_PORT1 0x16812C >> >-#define _ICL_MG_TX_LINK_PARAMS_TX1LN1_PORT1 0x16852C >> >-#define _ICL_MG_TX_LINK_PARAMS_TX1LN0_PORT2 0x16912C >> >-#define _ICL_MG_TX_LINK_PARAMS_TX1LN1_PORT2 0x16952C >> >-#define _ICL_MG_TX_LINK_PARAMS_TX1LN0_PORT3 0x16A12C >> >-#define _ICL_MG_TX_LINK_PARAMS_TX1LN1_PORT3 0x16A52C >> >-#define _ICL_MG_TX_LINK_PARAMS_TX1LN0_PORT4 0x16B12C >> >-#define _ICL_MG_TX_LINK_PARAMS_TX1LN1_PORT4 0x16B52C >> >-#define ICL_PORT_MG_TX1_LINK_PARAMS(port, ln) \ >> >- _ICL_MG_PHY_PORT_LN(port, ln, >> >_ICL_MG_TX_LINK_PARAMS_TX1LN0_PORT1, \ >> >- >> >_ICL_MG_TX_LINK_PARAMS_TX1LN0_PORT2, \ >> >- >> >_ICL_MG_TX_LINK_PARAMS_TX1LN1_PORT1) >> >- >> >-#define _ICL_MG_TX_LINK_PARAMS_TX2LN0_PORT1 0x1680AC >> >-#define _ICL_MG_TX_LINK_PARAMS_TX2LN1_PORT1 0x1684AC >> >-#define _ICL_MG_TX_LINK_PARAMS_TX2LN0_PORT2 0x1690AC >> >-#define _ICL_MG_TX_LINK_PARAMS_TX2LN1_PORT2 0x1694AC >> >-#define _ICL_MG_TX_LINK_PARAMS_TX2LN0_PORT3 0x16A0AC >> >-#define _ICL_MG_TX_LINK_PARAMS_TX2LN1_PORT3 0x16A4AC >> >-#define _ICL_MG_TX_LINK_PARAMS_TX2LN0_PORT4 0x16B0AC >> >-#define _ICL_MG_TX_LINK_PARAMS_TX2LN1_PORT4 0x16B4AC >> >-#define ICL_PORT_MG_TX2_LINK_PARAMS(port, ln) \ >> >- _ICL_MG_PHY_PORT_LN(port, ln, >> >_ICL_MG_TX_LINK_PARAMS_TX2LN0_PORT1, \ >> >- >> >_ICL_MG_TX_LINK_PARAMS_TX2LN0_PORT2, \ >> >- >> >_ICL_MG_TX_LINK_PARAMS_TX2LN1_PORT1) >> >+#define MG_TX_LINK_PARAMS_TX1LN0_PORT1 0x16812C >> >+#define MG_TX_LINK_PARAMS_TX1LN1_PORT1 0x16852C >> >+#define MG_TX_LINK_PARAMS_TX1LN0_PORT2 0x16912C >> >+#define MG_TX_LINK_PARAMS_TX1LN1_PORT2 0x16952C >> >+#define MG_TX_LINK_PARAMS_TX1LN0_PORT3 0x16A12C >> >+#define MG_TX_LINK_PARAMS_TX1LN1_PORT3 0x16A52C >> >+#define MG_TX_LINK_PARAMS_TX1LN0_PORT4 0x16B12C >> >+#define _MG_TX_LINK_PARAMS_TX1LN1_PORT4 0x16B52C >> >+#define MG_TX1_LINK_PARAMS(port, ln) \ >> >+ MG_PHY_PORT_LN(port, ln, MG_TX_LINK_PARAMS_TX1LN0_PORT1, \ >> >+ MG_TX_LINK_PARAMS_TX1LN0_PORT2, \ >> >+ MG_TX_LINK_PARAMS_TX1LN1_PORT1) >> >+ >> >+#define MG_TX_LINK_PARAMS_TX2LN0_PORT1 0x1680AC >> >+#define MG_TX_LINK_PARAMS_TX2LN1_PORT1 0x1684AC >> >+#define MG_TX_LINK_PARAMS_TX2LN0_PORT2 0x1690AC >> >+#define MG_TX_LINK_PARAMS_TX2LN1_PORT2 0x1694AC >> >+#define MG_TX_LINK_PARAMS_TX2LN0_PORT3 0x16A0AC >> >+#define MG_TX_LINK_PARAMS_TX2LN1_PORT3 0x16A4AC >> >+#define MG_TX_LINK_PARAMS_TX2LN0_PORT4 0x16B0AC >> >+#define MG_TX_LINK_PARAMS_TX2LN1_PORT4 0x16B4AC >> >+#define MG_TX2_LINK_PARAMS(port, ln) \ >> >+ MG_PHY_PORT_LN(port, ln, MG_TX_LINK_PARAMS_TX2LN0_PORT1, \ >> >+ MG_TX_LINK_PARAMS_TX2LN0_PORT2, \ >> >+ MG_TX_LINK_PARAMS_TX2LN1_PORT1) >> > #define CRI_USE_FS32 (1 << 5) >> >> Not a complete review of the patch, but noticed that most bitfields here are >missing. >> Apart from CRI_USE_FS2, there are others like CRI_REVERSEDEEMPH_EN etc... >are they skipped on purpose? >> > >Yes actually only the register bitfields that re required for the DDI Buffer >initializations and voltage swing programming are defined here. > >Manasi > >> Anusha >> >-#define _ICL_MG_TX_PISO_READLOAD_TX1LN0_PORT1 > 0x16814C >> >-#define _ICL_MG_TX_PISO_READLOAD_TX1LN1_PORT1 > 0x16854C >> >-#define _ICL_MG_TX_PISO_READLOAD_TX1LN0_PORT2 > 0x16914C >> >-#define _ICL_MG_TX_PISO_READLOAD_TX1LN1_PORT2 > 0x16954C >> >-#define _ICL_MG_TX_PISO_READLOAD_TX1LN0_PORT3 > 0x16A14C >> >-#define _ICL_MG_TX_PISO_READLOAD_TX1LN1_PORT3 > 0x16A54C >> >-#define _ICL_MG_TX_PISO_READLOAD_TX1LN0_PORT4 > 0x16B14C >> >-#define _ICL_MG_TX_PISO_READLOAD_TX1LN1_PORT4 > 0x16B54C >> >-#define ICL_PORT_MG_TX1_PISO_READLOAD(port, ln) \ >> >- _ICL_MG_PHY_PORT_LN(port, ln, >> >_ICL_MG_TX_PISO_READLOAD_TX1LN0_PORT1, \ >> >- >> >_ICL_MG_TX_PISO_READLOAD_TX1LN0_PORT2, \ >> >- >> >_ICL_MG_TX_PISO_READLOAD_TX1LN1_PORT1) >> >- >> >-#define _ICL_MG_TX_PISO_READLOAD_TX2LN0_PORT1 > 0x1680CC >> >-#define _ICL_MG_TX_PISO_READLOAD_TX2LN1_PORT1 > 0x1684CC >> >-#define _ICL_MG_TX_PISO_READLOAD_TX2LN0_PORT2 > 0x1690CC >> >-#define _ICL_MG_TX_PISO_READLOAD_TX2LN1_PORT2 > 0x1694CC >> >-#define _ICL_MG_TX_PISO_READLOAD_TX2LN0_PORT3 > 0x16A0CC >> >-#define _ICL_MG_TX_PISO_READLOAD_TX2LN1_PORT3 > 0x16A4CC >> >-#define _ICL_MG_TX_PISO_READLOAD_TX2LN0_PORT4 > 0x16B0CC >> >-#define _ICL_MG_TX_PISO_READLOAD_TX2LN1_PORT4 > 0x16B4CC >> >-#define ICL_PORT_MG_TX2_PISO_READLOAD(port, ln) \ >> >- _ICL_MG_PHY_PORT_LN(port, ln, >> >_ICL_MG_TX_PISO_READLOAD_TX2LN0_PORT1, \ >> >- >> >_ICL_MG_TX_PISO_READLOAD_TX2LN0_PORT2, \ >> >- >> >_ICL_MG_TX_PISO_READLOAD_TX2LN1_PORT1) >> >+#define MG_TX_PISO_READLOAD_TX1LN0_PORT1 0x16814C >> >+#define MG_TX_PISO_READLOAD_TX1LN1_PORT1 0x16854C >> >+#define MG_TX_PISO_READLOAD_TX1LN0_PORT2 0x16914C >> >+#define MG_TX_PISO_READLOAD_TX1LN1_PORT2 0x16954C >> >+#define MG_TX_PISO_READLOAD_TX1LN0_PORT3 0x16A14C >> >+#define MG_TX_PISO_READLOAD_TX1LN1_PORT3 0x16A54C >> >+#define MG_TX_PISO_READLOAD_TX1LN0_PORT4 0x16B14C >> >+#define MG_TX_PISO_READLOAD_TX1LN1_PORT4 0x16B54C >> >+#define MG_TX1_PISO_READLOAD(port, ln) \ >> >+ MG_PHY_PORT_LN(port, ln, MG_TX_PISO_READLOAD_TX1LN0_PORT1, \ >> >+ MG_TX_PISO_READLOAD_TX1LN0_PORT2, \ >> >+ MG_TX_PISO_READLOAD_TX1LN1_PORT1) >> >+ >> >+#define MG_TX_PISO_READLOAD_TX2LN0_PORT1 0x1680CC >> >+#define MG_TX_PISO_READLOAD_TX2LN1_PORT1 0x1684CC >> >+#define MG_TX_PISO_READLOAD_TX2LN0_PORT2 0x1690CC >> >+#define MG_TX_PISO_READLOAD_TX2LN1_PORT2 0x1694CC >> >+#define MG_TX_PISO_READLOAD_TX2LN0_PORT3 0x16A0CC >> >+#define MG_TX_PISO_READLOAD_TX2LN1_PORT3 0x16A4CC >> >+#define MG_TX_PISO_READLOAD_TX2LN0_PORT4 0x16B0CC >> >+#define MG_TX_PISO_READLOAD_TX2LN1_PORT4 0x16B4CC >> >+#define MG_TX2_PISO_READLOAD(port, ln) \ >> >+ MG_PHY_PORT_LN(port, ln, MG_TX_PISO_READLOAD_TX2LN0_PORT1, \ >> >+ MG_TX_PISO_READLOAD_TX2LN0_PORT2, \ >> >+ MG_TX_PISO_READLOAD_TX2LN1_PORT1) >> > #define CRI_CALCINIT (1 << 1) >> > >> >-#define _ICL_MG_TX_SWINGCTRL_TX1LN0_PORT1 0x168148 >> >-#define _ICL_MG_TX_SWINGCTRL_TX1LN1_PORT1 0x168548 >> >-#define _ICL_MG_TX_SWINGCTRL_TX1LN0_PORT2 0x169148 >> >-#define _ICL_MG_TX_SWINGCTRL_TX1LN1_PORT2 0x169548 >> >-#define _ICL_MG_TX_SWINGCTRL_TX1LN0_PORT3 0x16A148 >> >-#define _ICL_MG_TX_SWINGCTRL_TX1LN1_PORT3 0x16A548 >> >-#define _ICL_MG_TX_SWINGCTRL_TX1LN0_PORT4 0x16B148 >> >-#define _ICL_MG_TX_SWINGCTRL_TX1LN1_PORT4 0x16B548 >> >-#define ICL_PORT_MG_TX1_SWINGCTRL(port, ln) \ >> >- _ICL_MG_PHY_PORT_LN(port, ln, >> >_ICL_MG_TX_SWINGCTRL_TX1LN0_PORT1, \ >> >- _ICL_MG_TX_SWINGCTRL_TX1LN0_PORT2, \ >> >- _ICL_MG_TX_SWINGCTRL_TX1LN1_PORT1) >> >- >> >-#define _ICL_MG_TX_SWINGCTRL_TX2LN0_PORT1 0x1680C8 >> >-#define _ICL_MG_TX_SWINGCTRL_TX2LN1_PORT1 0x1684C8 >> >-#define _ICL_MG_TX_SWINGCTRL_TX2LN0_PORT2 0x1690C8 >> >-#define _ICL_MG_TX_SWINGCTRL_TX2LN1_PORT2 0x1694C8 >> >-#define _ICL_MG_TX_SWINGCTRL_TX2LN0_PORT3 0x16A0C8 >> >-#define _ICL_MG_TX_SWINGCTRL_TX2LN1_PORT3 0x16A4C8 >> >-#define _ICL_MG_TX_SWINGCTRL_TX2LN0_PORT4 0x16B0C8 >> >-#define _ICL_MG_TX_SWINGCTRL_TX2LN1_PORT4 0x16B4C8 >> >-#define ICL_PORT_MG_TX2_SWINGCTRL(port, ln) \ >> >- _ICL_MG_PHY_PORT_LN(port, ln, >> >_ICL_MG_TX_SWINGCTRL_TX2LN0_PORT1, \ >> >- _ICL_MG_TX_SWINGCTRL_TX2LN0_PORT2, \ >> >- _ICL_MG_TX_SWINGCTRL_TX2LN1_PORT1) >> >+#define MG_TX_SWINGCTRL_TX1LN0_PORT1 0x168148 >> >+#define MG_TX_SWINGCTRL_TX1LN1_PORT1 0x168548 >> >+#define MG_TX_SWINGCTRL_TX1LN0_PORT2 0x169148 >> >+#define MG_TX_SWINGCTRL_TX1LN1_PORT2 0x169548 >> >+#define MG_TX_SWINGCTRL_TX1LN0_PORT3 0x16A148 >> >+#define MG_TX_SWINGCTRL_TX1LN1_PORT3 0x16A548 >> >+#define MG_TX_SWINGCTRL_TX1LN0_PORT4 0x16B148 >> >+#define MG_TX_SWINGCTRL_TX1LN1_PORT4 0x16B548 >> >+#define MG_TX1_SWINGCTRL(port, ln) \ >> >+ MG_PHY_PORT_LN(port, ln, MG_TX_SWINGCTRL_TX1LN0_PORT1, \ >> >+ MG_TX_SWINGCTRL_TX1LN0_PORT2, \ >> >+ MG_TX_SWINGCTRL_TX1LN1_PORT1) >> >+ >> >+#define MG_TX_SWINGCTRL_TX2LN0_PORT1 0x1680C8 >> >+#define MG_TX_SWINGCTRL_TX2LN1_PORT1 0x1684C8 >> >+#define MG_TX_SWINGCTRL_TX2LN0_PORT2 0x1690C8 >> >+#define MG_TX_SWINGCTRL_TX2LN1_PORT2 0x1694C8 >> >+#define MG_TX_SWINGCTRL_TX2LN0_PORT3 0x16A0C8 >> >+#define MG_TX_SWINGCTRL_TX2LN1_PORT3 0x16A4C8 >> >+#define MG_TX_SWINGCTRL_TX2LN0_PORT4 0x16B0C8 >> >+#define MG_TX_SWINGCTRL_TX2LN1_PORT4 0x16B4C8 >> >+#define MG_TX2_SWINGCTRL(port, ln) \ >> >+ MG_PHY_PORT_LN(port, ln, MG_TX_SWINGCTRL_TX2LN0_PORT1, \ >> >+ MG_TX_SWINGCTRL_TX2LN0_PORT2, \ >> >+ MG_TX_SWINGCTRL_TX2LN1_PORT1) >> > #define CRI_TXDEEMPH_OVERRIDE_17_12(x) ((x) << 0) >> > #define CRI_TXDEEMPH_OVERRIDE_17_12_MASK (0x3F << 0) >> > >> >-#define _ICL_MG_TX_DRVCTRL_TX1LN0_PORT1 >> > 0x168144 >> >-#define _ICL_MG_TX_DRVCTRL_TX1LN1_PORT1 >> > 0x168544 >> >-#define _ICL_MG_TX_DRVCTRL_TX1LN0_PORT2 >> > 0x169144 >> >-#define _ICL_MG_TX_DRVCTRL_TX1LN1_PORT2 >> > 0x169544 >> >-#define _ICL_MG_TX_DRVCTRL_TX1LN0_PORT3 >> > 0x16A144 >> >-#define _ICL_MG_TX_DRVCTRL_TX1LN1_PORT3 >> > 0x16A544 >> >-#define _ICL_MG_TX_DRVCTRL_TX1LN0_PORT4 >> > 0x16B144 >> >-#define _ICL_MG_TX_DRVCTRL_TX1LN1_PORT4 >> > 0x16B544 >> >-#define ICL_PORT_MG_TX1_DRVCTRL(port, ln) \ >> >- _ICL_MG_PHY_PORT_LN(port, ln, >> >_ICL_MG_TX_DRVCTRL_TX1LN0_PORT1, \ >> >- _ICL_MG_TX_DRVCTRL_TX1LN0_PORT2, \ >> >- _ICL_MG_TX_DRVCTRL_TX1LN1_PORT1) >> >- >> >-#define _ICL_MG_TX_DRVCTRL_TX2LN0_PORT1 >> > 0x1680C4 >> >-#define _ICL_MG_TX_DRVCTRL_TX2LN1_PORT1 >> > 0x1684C4 >> >-#define _ICL_MG_TX_DRVCTRL_TX2LN0_PORT2 >> > 0x1690C4 >> >-#define _ICL_MG_TX_DRVCTRL_TX2LN1_PORT2 >> > 0x1694C4 >> >-#define _ICL_MG_TX_DRVCTRL_TX2LN0_PORT3 >> > 0x16A0C4 >> >-#define _ICL_MG_TX_DRVCTRL_TX2LN1_PORT3 >> > 0x16A4C4 >> >-#define _ICL_MG_TX_DRVCTRL_TX2LN0_PORT4 >> > 0x16B0C4 >> >-#define _ICL_MG_TX_DRVCTRL_TX2LN1_PORT4 >> > 0x16B4C4 >> >-#define ICL_PORT_MG_TX2_DRVCTRL(port, ln) \ >> >- _ICL_MG_PHY_PORT_LN(port, ln, >> >_ICL_MG_TX_DRVCTRL_TX2LN0_PORT1, \ >> >- _ICL_MG_TX_DRVCTRL_TX2LN0_PORT2, \ >> >- _ICL_MG_TX_DRVCTRL_TX2LN1_PORT1) >> >+#define MG_TX_DRVCTRL_TX1LN0_PORT1 0x168144 >> >+#define MG_TX_DRVCTRL_TX1LN1_PORT1 0x168544 >> >+#define MG_TX_DRVCTRL_TX1LN0_PORT2 0x169144 >> >+#define MG_TX_DRVCTRL_TX1LN1_PORT2 0x169544 >> >+#define MG_TX_DRVCTRL_TX1LN0_PORT3 0x16A144 >> >+#define MG_TX_DRVCTRL_TX1LN1_PORT3 0x16A544 >> >+#define MG_TX_DRVCTRL_TX1LN0_PORT4 0x16B144 >> >+#define MG_TX_DRVCTRL_TX1LN1_PORT4 0x16B544 >> >+#define MG_TX1_DRVCTRL(port, ln) \ >> >+ MG_PHY_PORT_LN(port, ln, MG_TX_DRVCTRL_TX1LN0_PORT1, \ >> >+ MG_TX_DRVCTRL_TX1LN0_PORT2, \ >> >+ MG_TX_DRVCTRL_TX1LN1_PORT1) >> >+ >> >+#define MG_TX_DRVCTRL_TX2LN0_PORT1 0x1680C4 >> >+#define MG_TX_DRVCTRL_TX2LN1_PORT1 0x1684C4 >> >+#define MG_TX_DRVCTRL_TX2LN0_PORT2 0x1690C4 >> >+#define MG_TX_DRVCTRL_TX2LN1_PORT2 0x1694C4 >> >+#define MG_TX_DRVCTRL_TX2LN0_PORT3 0x16A0C4 >> >+#define MG_TX_DRVCTRL_TX2LN1_PORT3 0x16A4C4 >> >+#define MG_TX_DRVCTRL_TX2LN0_PORT4 0x16B0C4 >> >+#define MG_TX_DRVCTRL_TX2LN1_PORT4 0x16B4C4 >> >+#define MG_TX2_DRVCTRL(port, ln) \ >> >+ MG_PHY_PORT_LN(port, ln, MG_TX_DRVCTRL_TX2LN0_PORT1, \ >> >+ MG_TX_DRVCTRL_TX2LN0_PORT2, \ >> >+ MG_TX_DRVCTRL_TX2LN1_PORT1)
All the _DRVCTRL_* registers, by naming convention are better off to be named _TXxLNx_TXPORTx instead of TXxLNx_PORTx Anusha >> > #define CRI_TXDEEMPH_OVERRIDE_11_6(x) ((x) << 24) >> > #define CRI_TXDEEMPH_OVERRIDE_11_6_MASK (0x3F >> ><< 24) >> > #define CRI_TXDEEMPH_OVERRIDE_EN (1 << 22) >> > #define CRI_TXDEEMPH_OVERRIDE_5_0(x) ((x) << 16) >> > #define CRI_TXDEEMPH_OVERRIDE_5_0_MASK (0x3F ><< 16) >> >+#define CRI_LOADGEN_SEL(x) ((x) << 12) >> >+#define CRI_LOADGEN_SEL_MASK (0x3 << 12) >> >+ >> >+#define MG_CLKHUB_LN0_PORT1 0x16839C >> >+#define MG_CLKHUB_LN1_PORT1 0x16879C >> >+#define MG_CLKHUB_LN0_PORT2 0x16939C >> >+#define MG_CLKHUB_LN1_PORT2 0x16979C >> >+#define MG_CLKHUB_LN0_PORT3 0x16A39C >> >+#define MG_CLKHUB_LN1_PORT3 0x16A79C >> >+#define MG_CLKHUB_LN0_PORT4 0x16B39C >> >+#define MG_CLKHUB_LN1_PORT4 0x16B79C >> >+#define MG_CLKHUB(port, ln) \ >> >+ MG_PHY_PORT_LN(port, ln, MG_CLKHUB_LN0_PORT1, \ >> >+ MG_CLKHUB_LN0_PORT2, \ >> >+ MG_CLKHUB_LN1_PORT1) >> >+#define CFG_LOW_RATE_LKREN_EN (1 << 11) >> >+ >> >+#define MG_TX_DCC_TX1LN0_PORT1 0x168110 >> >+#define MG_TX_DCC_TX1LN1_PORT1 0x168510 >> >+#define MG_TX_DCC_TX1LNO_PORT2 0x169110 >> >+#define MG_TX_DCC_TX1LN1_PORT2 0x169510 >> >+#define MG_TX_DCC_TX1LNO_PORT3 0x16A110 >> >+#define MG_TX_DCC_TX1LN1_PORT3 0x16A510 >> >+#define MG_TX_DCC_TX1LNO_PORT4 0x16B110 >> >+#define MG_TX_DCC_TX1LN1_PORT4 0x16B510 >> >+#define MG_TX1_DCC(port, ln) \ >> >+ MG_PHY_PORT_LN(port, ln, MG_TX_DCC_TX1LN0_PORT1, \ >> >+ MG_TX_DCC_TX1LNO_PORT2, \ >> >+ MG_TX_DCC_TX1LN1_PORT1) >> >+#define MG_TX_DCC_TX2LN0_PORT1 0x168090 >> >+#define MG_TX_DCC_TX2LN1_PORT1 0x168490 >> >+#define MG_TX_DCC_TX2LNO_PORT2 0x169090 >> >+#define MG_TX_DCC_TX2LN1_PORT2 0x169490 >> >+#define MG_TX_DCC_TX2LNO_PORT3 0x16A090 >> >+#define MG_TX_DCC_TX2LN1_PORT3 0x16A490 >> >+#define MG_TX_DCC_TX2LNO_PORT4 0x16B090 >> >+#define MG_TX_DCC_TX2LN1_PORT4 0x16B490 >> >+#define MG_TX2_DCC(port, ln) \ >> >+ MG_PHY_PORT_LN(port, ln, MG_TX_DCC_TX2LN0_PORT1, \ >> >+ MG_TX_DCC_TX2LNO_PORT2, \ >> >+ MG_TX_DCC_TX2LN1_PORT1) >> > >> > /* The spec defines this only for BXT PHY0, but lets assume that >> >this >> > * would exist for PHY1 too if it had a second channel. >> >-- >> >2.7.4 >> > >> >_______________________________________________ >> >Intel-gfx mailing list >> >[email protected] >> >https://lists.freedesktop.org/mailman/listinfo/intel-gfx _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
