On Tue, May 22, 2018 at 11:04:57PM -0700, Srivatsa, Anusha wrote: > > > >-----Original Message----- > >From: Intel-gfx [mailto:[email protected]] On Behalf Of > >Manasi Navare > >Sent: Tuesday, May 15, 2018 5:53 PM > >To: [email protected] > >Cc: Zanoni, Paulo R <[email protected]> > >Subject: [Intel-gfx] [PATCH] drm/i915/icl: Add remaining registers and > >bitfields for > >MG PHY DDI > > > >This patch adds the remaining register definitions and bit fields required > >for MG > >PHy DDI buffer initializations and voltage swing programming for MG PHy DDI > >ports. > > > >While at it this patch also fixes the naming for previously defined MG PHY > >registers in original commit id (c92f47b5ec977a "drm/i915/icl: > >Add register defs for voltage swing sequences for MG PHY DDI"). > >Since the MG PHY registers are first defined in ICL platform, there is no > >need for > >_ICL prefix. > > > >Signed-off-by: Manasi Navare <[email protected]> > >Cc: Paulo Zanoni <[email protected]> > >Cc: James Ausmus <[email protected]> > >--- > > drivers/gpu/drm/i915/i915_reg.h | 243 > > +++++++++++++++++++++++---------------- > >- > > 1 file changed, 142 insertions(+), 101 deletions(-) > > > >diff --git a/drivers/gpu/drm/i915/i915_reg.h > >b/drivers/gpu/drm/i915/i915_reg.h > >index f11bb21..a93b796 100644 > >--- a/drivers/gpu/drm/i915/i915_reg.h > >+++ b/drivers/gpu/drm/i915/i915_reg.h > >@@ -1827,121 +1827,162 @@ enum i915_power_well_id { > > #define N_SCALAR(x) ((x) << 24) > > #define N_SCALAR_MASK (0x7F << 24) > > > >-#define _ICL_MG_PHY_PORT_LN(port, ln, ln0p1, ln0p2, ln1p1) \ > >+#define MG_PHY_PORT_LN(port, ln, ln0p1, ln0p2, ln1p1) \ > > _MMIO(_PORT((port) - PORT_C, ln0p1, ln0p2) + (ln) * ((ln1p1) - (ln0p1))) > > > >-#define _ICL_MG_TX_LINK_PARAMS_TX1LN0_PORT1 0x16812C > >-#define _ICL_MG_TX_LINK_PARAMS_TX1LN1_PORT1 0x16852C > >-#define _ICL_MG_TX_LINK_PARAMS_TX1LN0_PORT2 0x16912C > >-#define _ICL_MG_TX_LINK_PARAMS_TX1LN1_PORT2 0x16952C > >-#define _ICL_MG_TX_LINK_PARAMS_TX1LN0_PORT3 0x16A12C > >-#define _ICL_MG_TX_LINK_PARAMS_TX1LN1_PORT3 0x16A52C > >-#define _ICL_MG_TX_LINK_PARAMS_TX1LN0_PORT4 0x16B12C > >-#define _ICL_MG_TX_LINK_PARAMS_TX1LN1_PORT4 0x16B52C > >-#define ICL_PORT_MG_TX1_LINK_PARAMS(port, ln) \ > >- _ICL_MG_PHY_PORT_LN(port, ln, > >_ICL_MG_TX_LINK_PARAMS_TX1LN0_PORT1, \ > >- > >_ICL_MG_TX_LINK_PARAMS_TX1LN0_PORT2, \ > >- > >_ICL_MG_TX_LINK_PARAMS_TX1LN1_PORT1) > >- > >-#define _ICL_MG_TX_LINK_PARAMS_TX2LN0_PORT1 0x1680AC > >-#define _ICL_MG_TX_LINK_PARAMS_TX2LN1_PORT1 0x1684AC > >-#define _ICL_MG_TX_LINK_PARAMS_TX2LN0_PORT2 0x1690AC > >-#define _ICL_MG_TX_LINK_PARAMS_TX2LN1_PORT2 0x1694AC > >-#define _ICL_MG_TX_LINK_PARAMS_TX2LN0_PORT3 0x16A0AC > >-#define _ICL_MG_TX_LINK_PARAMS_TX2LN1_PORT3 0x16A4AC > >-#define _ICL_MG_TX_LINK_PARAMS_TX2LN0_PORT4 0x16B0AC > >-#define _ICL_MG_TX_LINK_PARAMS_TX2LN1_PORT4 0x16B4AC > >-#define ICL_PORT_MG_TX2_LINK_PARAMS(port, ln) \ > >- _ICL_MG_PHY_PORT_LN(port, ln, > >_ICL_MG_TX_LINK_PARAMS_TX2LN0_PORT1, \ > >- > >_ICL_MG_TX_LINK_PARAMS_TX2LN0_PORT2, \ > >- > >_ICL_MG_TX_LINK_PARAMS_TX2LN1_PORT1) > >+#define MG_TX_LINK_PARAMS_TX1LN0_PORT1 0x16812C > >+#define MG_TX_LINK_PARAMS_TX1LN1_PORT1 0x16852C > >+#define MG_TX_LINK_PARAMS_TX1LN0_PORT2 0x16912C > >+#define MG_TX_LINK_PARAMS_TX1LN1_PORT2 0x16952C > >+#define MG_TX_LINK_PARAMS_TX1LN0_PORT3 0x16A12C > >+#define MG_TX_LINK_PARAMS_TX1LN1_PORT3 0x16A52C > >+#define MG_TX_LINK_PARAMS_TX1LN0_PORT4 0x16B12C > >+#define _MG_TX_LINK_PARAMS_TX1LN1_PORT4 0x16B52C > >+#define MG_TX1_LINK_PARAMS(port, ln) \ > >+ MG_PHY_PORT_LN(port, ln, MG_TX_LINK_PARAMS_TX1LN0_PORT1, \ > >+ MG_TX_LINK_PARAMS_TX1LN0_PORT2, \ > >+ MG_TX_LINK_PARAMS_TX1LN1_PORT1) > >+ > >+#define MG_TX_LINK_PARAMS_TX2LN0_PORT1 0x1680AC > >+#define MG_TX_LINK_PARAMS_TX2LN1_PORT1 0x1684AC > >+#define MG_TX_LINK_PARAMS_TX2LN0_PORT2 0x1690AC > >+#define MG_TX_LINK_PARAMS_TX2LN1_PORT2 0x1694AC > >+#define MG_TX_LINK_PARAMS_TX2LN0_PORT3 0x16A0AC > >+#define MG_TX_LINK_PARAMS_TX2LN1_PORT3 0x16A4AC > >+#define MG_TX_LINK_PARAMS_TX2LN0_PORT4 0x16B0AC > >+#define MG_TX_LINK_PARAMS_TX2LN1_PORT4 0x16B4AC > >+#define MG_TX2_LINK_PARAMS(port, ln) \ > >+ MG_PHY_PORT_LN(port, ln, MG_TX_LINK_PARAMS_TX2LN0_PORT1, \ > >+ MG_TX_LINK_PARAMS_TX2LN0_PORT2, \ > >+ MG_TX_LINK_PARAMS_TX2LN1_PORT1) > > #define CRI_USE_FS32 (1 << 5) > > Not a complete review of the patch, but noticed that most bitfields here are > missing. > Apart from CRI_USE_FS2, there are others like CRI_REVERSEDEEMPH_EN etc... are > they skipped on purpose? >
Yes actually only the register bitfields that re required for the DDI Buffer initializations and voltage swing programming are defined here. Manasi > Anusha > >-#define _ICL_MG_TX_PISO_READLOAD_TX1LN0_PORT1 0x16814C > >-#define _ICL_MG_TX_PISO_READLOAD_TX1LN1_PORT1 0x16854C > >-#define _ICL_MG_TX_PISO_READLOAD_TX1LN0_PORT2 0x16914C > >-#define _ICL_MG_TX_PISO_READLOAD_TX1LN1_PORT2 0x16954C > >-#define _ICL_MG_TX_PISO_READLOAD_TX1LN0_PORT3 0x16A14C > >-#define _ICL_MG_TX_PISO_READLOAD_TX1LN1_PORT3 0x16A54C > >-#define _ICL_MG_TX_PISO_READLOAD_TX1LN0_PORT4 0x16B14C > >-#define _ICL_MG_TX_PISO_READLOAD_TX1LN1_PORT4 0x16B54C > >-#define ICL_PORT_MG_TX1_PISO_READLOAD(port, ln) \ > >- _ICL_MG_PHY_PORT_LN(port, ln, > >_ICL_MG_TX_PISO_READLOAD_TX1LN0_PORT1, \ > >- > >_ICL_MG_TX_PISO_READLOAD_TX1LN0_PORT2, \ > >- > >_ICL_MG_TX_PISO_READLOAD_TX1LN1_PORT1) > >- > >-#define _ICL_MG_TX_PISO_READLOAD_TX2LN0_PORT1 0x1680CC > >-#define _ICL_MG_TX_PISO_READLOAD_TX2LN1_PORT1 0x1684CC > >-#define _ICL_MG_TX_PISO_READLOAD_TX2LN0_PORT2 0x1690CC > >-#define _ICL_MG_TX_PISO_READLOAD_TX2LN1_PORT2 0x1694CC > >-#define _ICL_MG_TX_PISO_READLOAD_TX2LN0_PORT3 0x16A0CC > >-#define _ICL_MG_TX_PISO_READLOAD_TX2LN1_PORT3 0x16A4CC > >-#define _ICL_MG_TX_PISO_READLOAD_TX2LN0_PORT4 0x16B0CC > >-#define _ICL_MG_TX_PISO_READLOAD_TX2LN1_PORT4 0x16B4CC > >-#define ICL_PORT_MG_TX2_PISO_READLOAD(port, ln) \ > >- _ICL_MG_PHY_PORT_LN(port, ln, > >_ICL_MG_TX_PISO_READLOAD_TX2LN0_PORT1, \ > >- > >_ICL_MG_TX_PISO_READLOAD_TX2LN0_PORT2, \ > >- > >_ICL_MG_TX_PISO_READLOAD_TX2LN1_PORT1) > >+#define MG_TX_PISO_READLOAD_TX1LN0_PORT1 0x16814C > >+#define MG_TX_PISO_READLOAD_TX1LN1_PORT1 0x16854C > >+#define MG_TX_PISO_READLOAD_TX1LN0_PORT2 0x16914C > >+#define MG_TX_PISO_READLOAD_TX1LN1_PORT2 0x16954C > >+#define MG_TX_PISO_READLOAD_TX1LN0_PORT3 0x16A14C > >+#define MG_TX_PISO_READLOAD_TX1LN1_PORT3 0x16A54C > >+#define MG_TX_PISO_READLOAD_TX1LN0_PORT4 0x16B14C > >+#define MG_TX_PISO_READLOAD_TX1LN1_PORT4 0x16B54C > >+#define MG_TX1_PISO_READLOAD(port, ln) \ > >+ MG_PHY_PORT_LN(port, ln, MG_TX_PISO_READLOAD_TX1LN0_PORT1, \ > >+ MG_TX_PISO_READLOAD_TX1LN0_PORT2, \ > >+ MG_TX_PISO_READLOAD_TX1LN1_PORT1) > >+ > >+#define MG_TX_PISO_READLOAD_TX2LN0_PORT1 0x1680CC > >+#define MG_TX_PISO_READLOAD_TX2LN1_PORT1 0x1684CC > >+#define MG_TX_PISO_READLOAD_TX2LN0_PORT2 0x1690CC > >+#define MG_TX_PISO_READLOAD_TX2LN1_PORT2 0x1694CC > >+#define MG_TX_PISO_READLOAD_TX2LN0_PORT3 0x16A0CC > >+#define MG_TX_PISO_READLOAD_TX2LN1_PORT3 0x16A4CC > >+#define MG_TX_PISO_READLOAD_TX2LN0_PORT4 0x16B0CC > >+#define MG_TX_PISO_READLOAD_TX2LN1_PORT4 0x16B4CC > >+#define MG_TX2_PISO_READLOAD(port, ln) \ > >+ MG_PHY_PORT_LN(port, ln, MG_TX_PISO_READLOAD_TX2LN0_PORT1, \ > >+ MG_TX_PISO_READLOAD_TX2LN0_PORT2, \ > >+ MG_TX_PISO_READLOAD_TX2LN1_PORT1) > > #define CRI_CALCINIT (1 << 1) > > > >-#define _ICL_MG_TX_SWINGCTRL_TX1LN0_PORT1 0x168148 > >-#define _ICL_MG_TX_SWINGCTRL_TX1LN1_PORT1 0x168548 > >-#define _ICL_MG_TX_SWINGCTRL_TX1LN0_PORT2 0x169148 > >-#define _ICL_MG_TX_SWINGCTRL_TX1LN1_PORT2 0x169548 > >-#define _ICL_MG_TX_SWINGCTRL_TX1LN0_PORT3 0x16A148 > >-#define _ICL_MG_TX_SWINGCTRL_TX1LN1_PORT3 0x16A548 > >-#define _ICL_MG_TX_SWINGCTRL_TX1LN0_PORT4 0x16B148 > >-#define _ICL_MG_TX_SWINGCTRL_TX1LN1_PORT4 0x16B548 > >-#define ICL_PORT_MG_TX1_SWINGCTRL(port, ln) \ > >- _ICL_MG_PHY_PORT_LN(port, ln, > >_ICL_MG_TX_SWINGCTRL_TX1LN0_PORT1, \ > >- _ICL_MG_TX_SWINGCTRL_TX1LN0_PORT2, \ > >- _ICL_MG_TX_SWINGCTRL_TX1LN1_PORT1) > >- > >-#define _ICL_MG_TX_SWINGCTRL_TX2LN0_PORT1 0x1680C8 > >-#define _ICL_MG_TX_SWINGCTRL_TX2LN1_PORT1 0x1684C8 > >-#define _ICL_MG_TX_SWINGCTRL_TX2LN0_PORT2 0x1690C8 > >-#define _ICL_MG_TX_SWINGCTRL_TX2LN1_PORT2 0x1694C8 > >-#define _ICL_MG_TX_SWINGCTRL_TX2LN0_PORT3 0x16A0C8 > >-#define _ICL_MG_TX_SWINGCTRL_TX2LN1_PORT3 0x16A4C8 > >-#define _ICL_MG_TX_SWINGCTRL_TX2LN0_PORT4 0x16B0C8 > >-#define _ICL_MG_TX_SWINGCTRL_TX2LN1_PORT4 0x16B4C8 > >-#define ICL_PORT_MG_TX2_SWINGCTRL(port, ln) \ > >- _ICL_MG_PHY_PORT_LN(port, ln, > >_ICL_MG_TX_SWINGCTRL_TX2LN0_PORT1, \ > >- _ICL_MG_TX_SWINGCTRL_TX2LN0_PORT2, \ > >- _ICL_MG_TX_SWINGCTRL_TX2LN1_PORT1) > >+#define MG_TX_SWINGCTRL_TX1LN0_PORT1 0x168148 > >+#define MG_TX_SWINGCTRL_TX1LN1_PORT1 0x168548 > >+#define MG_TX_SWINGCTRL_TX1LN0_PORT2 0x169148 > >+#define MG_TX_SWINGCTRL_TX1LN1_PORT2 0x169548 > >+#define MG_TX_SWINGCTRL_TX1LN0_PORT3 0x16A148 > >+#define MG_TX_SWINGCTRL_TX1LN1_PORT3 0x16A548 > >+#define MG_TX_SWINGCTRL_TX1LN0_PORT4 0x16B148 > >+#define MG_TX_SWINGCTRL_TX1LN1_PORT4 0x16B548 > >+#define MG_TX1_SWINGCTRL(port, ln) \ > >+ MG_PHY_PORT_LN(port, ln, MG_TX_SWINGCTRL_TX1LN0_PORT1, \ > >+ MG_TX_SWINGCTRL_TX1LN0_PORT2, \ > >+ MG_TX_SWINGCTRL_TX1LN1_PORT1) > >+ > >+#define MG_TX_SWINGCTRL_TX2LN0_PORT1 0x1680C8 > >+#define MG_TX_SWINGCTRL_TX2LN1_PORT1 0x1684C8 > >+#define MG_TX_SWINGCTRL_TX2LN0_PORT2 0x1690C8 > >+#define MG_TX_SWINGCTRL_TX2LN1_PORT2 0x1694C8 > >+#define MG_TX_SWINGCTRL_TX2LN0_PORT3 0x16A0C8 > >+#define MG_TX_SWINGCTRL_TX2LN1_PORT3 0x16A4C8 > >+#define MG_TX_SWINGCTRL_TX2LN0_PORT4 0x16B0C8 > >+#define MG_TX_SWINGCTRL_TX2LN1_PORT4 0x16B4C8 > >+#define MG_TX2_SWINGCTRL(port, ln) \ > >+ MG_PHY_PORT_LN(port, ln, MG_TX_SWINGCTRL_TX2LN0_PORT1, \ > >+ MG_TX_SWINGCTRL_TX2LN0_PORT2, \ > >+ MG_TX_SWINGCTRL_TX2LN1_PORT1) > > #define CRI_TXDEEMPH_OVERRIDE_17_12(x) ((x) << 0) > > #define CRI_TXDEEMPH_OVERRIDE_17_12_MASK (0x3F << 0) > > > >-#define _ICL_MG_TX_DRVCTRL_TX1LN0_PORT1 > > 0x168144 > >-#define _ICL_MG_TX_DRVCTRL_TX1LN1_PORT1 > > 0x168544 > >-#define _ICL_MG_TX_DRVCTRL_TX1LN0_PORT2 > > 0x169144 > >-#define _ICL_MG_TX_DRVCTRL_TX1LN1_PORT2 > > 0x169544 > >-#define _ICL_MG_TX_DRVCTRL_TX1LN0_PORT3 > > 0x16A144 > >-#define _ICL_MG_TX_DRVCTRL_TX1LN1_PORT3 > > 0x16A544 > >-#define _ICL_MG_TX_DRVCTRL_TX1LN0_PORT4 > > 0x16B144 > >-#define _ICL_MG_TX_DRVCTRL_TX1LN1_PORT4 > > 0x16B544 > >-#define ICL_PORT_MG_TX1_DRVCTRL(port, ln) \ > >- _ICL_MG_PHY_PORT_LN(port, ln, > >_ICL_MG_TX_DRVCTRL_TX1LN0_PORT1, \ > >- _ICL_MG_TX_DRVCTRL_TX1LN0_PORT2, \ > >- _ICL_MG_TX_DRVCTRL_TX1LN1_PORT1) > >- > >-#define _ICL_MG_TX_DRVCTRL_TX2LN0_PORT1 > > 0x1680C4 > >-#define _ICL_MG_TX_DRVCTRL_TX2LN1_PORT1 > > 0x1684C4 > >-#define _ICL_MG_TX_DRVCTRL_TX2LN0_PORT2 > > 0x1690C4 > >-#define _ICL_MG_TX_DRVCTRL_TX2LN1_PORT2 > > 0x1694C4 > >-#define _ICL_MG_TX_DRVCTRL_TX2LN0_PORT3 > > 0x16A0C4 > >-#define _ICL_MG_TX_DRVCTRL_TX2LN1_PORT3 > > 0x16A4C4 > >-#define _ICL_MG_TX_DRVCTRL_TX2LN0_PORT4 > > 0x16B0C4 > >-#define _ICL_MG_TX_DRVCTRL_TX2LN1_PORT4 > > 0x16B4C4 > >-#define ICL_PORT_MG_TX2_DRVCTRL(port, ln) \ > >- _ICL_MG_PHY_PORT_LN(port, ln, > >_ICL_MG_TX_DRVCTRL_TX2LN0_PORT1, \ > >- _ICL_MG_TX_DRVCTRL_TX2LN0_PORT2, \ > >- _ICL_MG_TX_DRVCTRL_TX2LN1_PORT1) > >+#define MG_TX_DRVCTRL_TX1LN0_PORT1 0x168144 > >+#define MG_TX_DRVCTRL_TX1LN1_PORT1 0x168544 > >+#define MG_TX_DRVCTRL_TX1LN0_PORT2 0x169144 > >+#define MG_TX_DRVCTRL_TX1LN1_PORT2 0x169544 > >+#define MG_TX_DRVCTRL_TX1LN0_PORT3 0x16A144 > >+#define MG_TX_DRVCTRL_TX1LN1_PORT3 0x16A544 > >+#define MG_TX_DRVCTRL_TX1LN0_PORT4 0x16B144 > >+#define MG_TX_DRVCTRL_TX1LN1_PORT4 0x16B544 > >+#define MG_TX1_DRVCTRL(port, ln) \ > >+ MG_PHY_PORT_LN(port, ln, MG_TX_DRVCTRL_TX1LN0_PORT1, \ > >+ MG_TX_DRVCTRL_TX1LN0_PORT2, \ > >+ MG_TX_DRVCTRL_TX1LN1_PORT1) > >+ > >+#define MG_TX_DRVCTRL_TX2LN0_PORT1 0x1680C4 > >+#define MG_TX_DRVCTRL_TX2LN1_PORT1 0x1684C4 > >+#define MG_TX_DRVCTRL_TX2LN0_PORT2 0x1690C4 > >+#define MG_TX_DRVCTRL_TX2LN1_PORT2 0x1694C4 > >+#define MG_TX_DRVCTRL_TX2LN0_PORT3 0x16A0C4 > >+#define MG_TX_DRVCTRL_TX2LN1_PORT3 0x16A4C4 > >+#define MG_TX_DRVCTRL_TX2LN0_PORT4 0x16B0C4 > >+#define MG_TX_DRVCTRL_TX2LN1_PORT4 0x16B4C4 > >+#define MG_TX2_DRVCTRL(port, ln) \ > >+ MG_PHY_PORT_LN(port, ln, MG_TX_DRVCTRL_TX2LN0_PORT1, \ > >+ MG_TX_DRVCTRL_TX2LN0_PORT2, \ > >+ MG_TX_DRVCTRL_TX2LN1_PORT1) > > #define CRI_TXDEEMPH_OVERRIDE_11_6(x) ((x) << 24) > > #define CRI_TXDEEMPH_OVERRIDE_11_6_MASK (0x3F > ><< 24) > > #define CRI_TXDEEMPH_OVERRIDE_EN (1 << 22) > > #define CRI_TXDEEMPH_OVERRIDE_5_0(x) ((x) << 16) > > #define CRI_TXDEEMPH_OVERRIDE_5_0_MASK (0x3F << 16) > >+#define CRI_LOADGEN_SEL(x) ((x) << 12) > >+#define CRI_LOADGEN_SEL_MASK (0x3 << 12) > >+ > >+#define MG_CLKHUB_LN0_PORT1 0x16839C > >+#define MG_CLKHUB_LN1_PORT1 0x16879C > >+#define MG_CLKHUB_LN0_PORT2 0x16939C > >+#define MG_CLKHUB_LN1_PORT2 0x16979C > >+#define MG_CLKHUB_LN0_PORT3 0x16A39C > >+#define MG_CLKHUB_LN1_PORT3 0x16A79C > >+#define MG_CLKHUB_LN0_PORT4 0x16B39C > >+#define MG_CLKHUB_LN1_PORT4 0x16B79C > >+#define MG_CLKHUB(port, ln) \ > >+ MG_PHY_PORT_LN(port, ln, MG_CLKHUB_LN0_PORT1, \ > >+ MG_CLKHUB_LN0_PORT2, \ > >+ MG_CLKHUB_LN1_PORT1) > >+#define CFG_LOW_RATE_LKREN_EN (1 << 11) > >+ > >+#define MG_TX_DCC_TX1LN0_PORT1 0x168110 > >+#define MG_TX_DCC_TX1LN1_PORT1 0x168510 > >+#define MG_TX_DCC_TX1LNO_PORT2 0x169110 > >+#define MG_TX_DCC_TX1LN1_PORT2 0x169510 > >+#define MG_TX_DCC_TX1LNO_PORT3 0x16A110 > >+#define MG_TX_DCC_TX1LN1_PORT3 0x16A510 > >+#define MG_TX_DCC_TX1LNO_PORT4 0x16B110 > >+#define MG_TX_DCC_TX1LN1_PORT4 0x16B510 > >+#define MG_TX1_DCC(port, ln) \ > >+ MG_PHY_PORT_LN(port, ln, MG_TX_DCC_TX1LN0_PORT1, \ > >+ MG_TX_DCC_TX1LNO_PORT2, \ > >+ MG_TX_DCC_TX1LN1_PORT1) > >+#define MG_TX_DCC_TX2LN0_PORT1 0x168090 > >+#define MG_TX_DCC_TX2LN1_PORT1 0x168490 > >+#define MG_TX_DCC_TX2LNO_PORT2 0x169090 > >+#define MG_TX_DCC_TX2LN1_PORT2 0x169490 > >+#define MG_TX_DCC_TX2LNO_PORT3 0x16A090 > >+#define MG_TX_DCC_TX2LN1_PORT3 0x16A490 > >+#define MG_TX_DCC_TX2LNO_PORT4 0x16B090 > >+#define MG_TX_DCC_TX2LN1_PORT4 0x16B490 > >+#define MG_TX2_DCC(port, ln) \ > >+ MG_PHY_PORT_LN(port, ln, MG_TX_DCC_TX2LN0_PORT1, \ > >+ MG_TX_DCC_TX2LNO_PORT2, \ > >+ MG_TX_DCC_TX2LN1_PORT1) > > > > /* The spec defines this only for BXT PHY0, but lets assume that this > > * would exist for PHY1 too if it had a second channel. > >-- > >2.7.4 > > > >_______________________________________________ > >Intel-gfx mailing list > >[email protected] > >https://lists.freedesktop.org/mailman/listinfo/intel-gfx _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
