On Fri, 02 Mar 2018, Ville Syrjala <[email protected]> wrote:
> From: Ville Syrjälä <[email protected]>
>
> Parametrize the TRANS_DP_PORT_SEL macros.
>
> Signed-off-by: Ville Syrjälä <[email protected]>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 8 +++-----
> drivers/gpu/drm/i915/intel_display.c | 23 +++++++----------------
> 2 files changed, 10 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index d7dc03bd0b4f..f1460fd27881 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -7914,11 +7914,9 @@ enum {
> #define _TRANS_DP_CTL_C 0xe2300
> #define TRANS_DP_CTL(pipe) _MMIO_PIPE(pipe, _TRANS_DP_CTL_A,
> _TRANS_DP_CTL_B)
> #define TRANS_DP_OUTPUT_ENABLE (1<<31)
> -#define TRANS_DP_PORT_SEL_B (0<<29)
> -#define TRANS_DP_PORT_SEL_C (1<<29)
> -#define TRANS_DP_PORT_SEL_D (2<<29)
> -#define TRANS_DP_PORT_SEL_NONE (3<<29)
> -#define TRANS_DP_PORT_SEL_MASK (3<<29)
> +#define TRANS_DP_PORT_SEL(port) (((port) - PORT_B) << 29)
> +#define TRANS_DP_PORT_SEL_NONE (3 << 29)
> +#define TRANS_DP_PORT_SEL_MASK (3 << 29)
> #define TRANS_DP_PIPE_TO_PORT(val) ((((val) & TRANS_DP_PORT_SEL_MASK) >>
> 29) + PORT_B)
> #define TRANS_DP_AUDIO_ONLY (1<<26)
> #define TRANS_DP_ENH_FRAMING (1<<18)
> diff --git a/drivers/gpu/drm/i915/intel_display.c
> b/drivers/gpu/drm/i915/intel_display.c
> index 239059493243..e8bedf09d892 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -1318,9 +1318,9 @@ static void assert_pch_ports_disabled(struct
> drm_i915_private *dev_priv,
> {
> enum pipe port_pipe;
>
> - assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
> - assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
> - assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
> + assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B,
> TRANS_DP_PORT_SEL(PORT_B));
> + assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C,
> TRANS_DP_PORT_SEL(PORT_C));
> + assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D,
> TRANS_DP_PORT_SEL(PORT_D));
>
> I915_STATE_WARN(intel_crt_port_enabled(dev_priv, PCH_ADPA, &port_pipe)
> &&
> port_pipe == pipe,
> @@ -4603,6 +4603,8 @@ static void ironlake_pch_enable(const struct
> intel_crtc_state *crtc_state)
> &crtc_state->base.adjusted_mode;
> u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) >> 5;
> i915_reg_t reg = TRANS_DP_CTL(pipe);
> + enum port port;
> +
> temp = I915_READ(reg);
> temp &= ~(TRANS_DP_PORT_SEL_MASK |
> TRANS_DP_SYNC_MASK |
> @@ -4615,19 +4617,8 @@ static void ironlake_pch_enable(const struct
> intel_crtc_state *crtc_state)
> if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
> temp |= TRANS_DP_VSYNC_ACTIVE_HIGH;
>
> - switch (intel_trans_dp_port_sel(crtc)) {
> - case PORT_B:
> - temp |= TRANS_DP_PORT_SEL_B;
> - break;
> - case PORT_C:
> - temp |= TRANS_DP_PORT_SEL_C;
> - break;
> - case PORT_D:
> - temp |= TRANS_DP_PORT_SEL_D;
> - break;
> - default:
> - BUG();
> - }
> + port = intel_trans_dp_port_sel(crtc);
I'd be happier to retain something like this here:
WARN_ON(port < PORT_B || port > PORT_D);
With that,
Reviewed-by: Jani Nikula <[email protected]>
> + temp |= TRANS_DP_PORT_SEL(port);
>
> I915_WRITE(reg, temp);
> }
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
