Ken Murchison wrote:
Christian Schulte wrote:Thanks a lot! After cvs update delivery now works! Great....
Ken Murchison wrote:^^^^^^^^^^^^^^^^^^^^^^^
Christian Schulte wrote:I actually had a look at the code and found out the following:
Ken Murchison wrote:Its kind of hard to diagnose this without seeing the actual
Christian Schulte wrote:Yes!
Ken Murchison wrote:Do you only get this problem when trying to deliver to a shared folder?
Christian Schulte wrote:I cannot get it to work. Still the same problem! I configured cyrus with
Ken Murchison wrote:Sorry, I missed this in your original message. This error is a result
Christian Schulte wrote:Does not work either! I had
Hi,Sorry for the delay, but I finally got a chance to look into this.
I am running 2_2 cvs branch with virtual domain support turned on and
everything seemd to work fine. I now wanted to move my old installation
to the new one and cannot get delivery to shared folders working.
If I create a shared folder with cyradm like:
$>cm sharedfolder
I cannot do
$>sam sharedfolder user@domain lrswipcda
and get
setaclmailbox: user@domain: lrswipcda: Invalid identifier
If I create a shared folder with cyradm like:
$>cm sharedfolder@domain
I can do
$>sam sharedfolder@domain user@domain lrswipcda
and the user can subscribe to the folder and sees it on the same level
than his inbox as expected. If I now setup sendmail to send via the
cyrusv2 mailer with an address like +sharedfolder@domain I get the
following errors in the logs which I do not understand ! What is wrong
here ?
Nov 15 02:55:33 mail lmtpunix[8259]: [ID 921384 local6.debug] accepted
connection
Nov 15 02:55:33 mail lmtpunix[8259]: [ID 685068 local6.debug] lmtp
connection preauth'd as postman
Nov 15 02:55:33 mail lmtpunix[8259]: [ID 152585 local6.error] couldn't
create stage directory: : No such file or directory
Nov 15 02:55:33 mail lmtpunix[8259]: [ID 519036 local6.error] IOERROR:
creating message file 8259-1037325333: No such file or directory
Nov 15 02:55:33 mail sendmail[8262]: [ID 801593 mail.info]
gAF1rq13008256: to=<+sharedfolder@domain>, delay=00:01:41,
xdelay=00:00:00, mailer=cyrusv2, pri=210378, relay=localhost, dsn=4.2.0,
stat=Deferred: 451 4.3.2 cannot create temporary file: No such file or
directory
Cyrus isn't the problem here, the problem is that the MTA is stripping
the domain off of the recipient address when it gets passed to lmtpd.
Try changing the cyrusv2 mailer definition to use:
S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP
S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP/HdrToSMTP
in my cyrusv2.m4 file and changing it to
S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP
produces the same error! sendmail delivers correctly to lmtpd, I think:
20776 === CONNECT localhost
20776 <<< 220 XXXXXXXX LMTP Cyrus v2.2.prealpha ready
20776 >>> LHLO XXXXXXXX
20776 <<< 250-XXXXXXX
20776 <<< 250-8BITMIME
20776 <<< 250-ENHANCEDSTATUSCODES
20776 <<< 250-PIPELINING
20776 <<< 250-SIZE
20776 <<< 250-AUTH EXTERNAL
20776 <<< 250 IGNOREQUOTA
20776 >>> MAIL From:<[EMAIL PROTECTED]> SIZE=1076 BODY=8BITMIME
20776 <<< 250 2.1.0 ok
20776 >>> RCPT To:<+sharedfolder@domain>
20776 >>> DATA
20776 <<< 250 2.1.5 ok
20776 <<< 451 4.3.2 cannot create temporary file: No such file or directory
20776 >>> QUIT
20776 <<< 221 2.0.0 bye
20776 <<< [EOF]
And the logfile states the same errors ! What makes me a bit confused is
the error message itself. lmtpd is trying to create a temporary file but
the error is "No such file or directory". Is it a missing directory or
wrong permissions on a directory ?
of lmtpd's failure to create a spoolfile for the message. Most of the
time this will be in the staging area of the recipient's partition (eg,
/var/spool/imap/stage.), otherwise this will be in your temp space (call
to tmpfile()). Check the ownership/permissions on the 'stage.'
directory on your Cyrus partitions. It should look something like:
[root@eagle imap]# ls -l /var/spool/imap/
total 8
drwx------ 3 cyrus mail 24 Jul 10 12:10 domain
drwx------ 8 cyrus mail 73 Nov 5 12:51 netnews
drwx------ 10 cyrus mail 4096 Oct 4 13:14 public
drwx------ 2 cyrus mail 6 Dec 3 10:18 stage.
drwx------ 22 cyrus mail 4096 Aug 27 11:49 user
--with-cyrus-user=cyrus and --with-cyrus-group=smmsp
schulte-01:48:30:/var >ls -l /var
...
drwxr-xr-x 8 root bin 512 Sep 20 21:27 spool
....
schulte-01:48:33:/var >ls -l /var/spool/
...
drwxrwx--- 4 cyrus smmsp 512 Nov 15 03:06 imap
...
schulte-01:49:54:/var >ls -l /var/spool/imap/
total 4
drwxrwxr-x 15 cyrus smmsp 512 Dez 3 22:15 domain
drwxrwxr-x 2 cyrus smmsp 512 Dez 5 01:44 stage.
If I do a ./mkimap -d domain I have to chmod 0770 /var/imap/db.backup*
afterwards to get rid of DBERROR logentries during cyrus startup, so I
think I have a permission problem but where ?
--Christian--
Or does it happen when trying to deliver to any folder, including aNo! Sieves' file into works correctly and delivery to all other folders
user's INBOX?
than a shared folder also works for me! If I investigate the lmtpd
process during delivery to a shared folder I can see the following in
truss output (lines with comments from me start with >>>; hope this will
be readable after sending it):
The error occures at the lines:
20225: open(0x08043280, 01402, 0666) Err#13 EACCES
20225: 0x08043280: "20225-1039130904"
20225: mkdir(0x08043680, 0755) Err#2 ENOENT
20225: 0x08043680: ""
Err#13 EACCES to a file called "20225-1039130904" which I think is the temporay file not being created or not being able to read in again...
Here is the whole output of the transcation:
20225: psargs: lmtpd -C /etc/imapd.conf.v2
20225: accept(4, 0x00000000, 0x00000000, 1) (sleeping...)
20225: accept(4, 0x00000000, 0x00000000, 1) = 13
20225: fcntl(12, 7, 0x0804758C) = 0
20225: typ=F_UNLCK whence=SEEK_SET start=0 len=0 sys=1 pid=134510128
20225: alarm(0) = 0
20225: write(3, 0x080475F8, 4) = 4
20225: 0x080475F8: "02\0\0\0"
20225: fxstat(2, 5, 0x08047374) = 0
20225: d=0x00740480 i=194451 m=0020666 l=1 u=0 g=3 rdev=0x00540000
20225: at = Jun 6 20:22:13 MEST 2002 [ 1023387733 ]
20225: mt = Jan 9 00:24:27 MET 2002 [ 1010532267 ]
20225: ct = Jun 6 20:22:13 MEST 2002 [ 1023387733 ]
20225: bsz=8192 blks=0 fs=ufs
20225: time() = 1039130904
20225: getpid() = 20225 [27804]
20225: putmsg(5, 0x08046A2C, 0x08046A20, 0) = 0
20225: ctl: maxlen=24 len=24 buf=0x0804735C: "\0\0\0\0\0BF10\0"..
20225: \0\0\0\0\0BF10\0B081\0\001\0\0\0 h\0\0\0B7\0\0\0
20225: dat: maxlen=1280 len=88 buf=0x08046E5C: " D e c 6 0"..
20225: D e c 6 0 0 : 2 8 : 2 4 l m t p u n i x [ 2 0 2 2 5 ] :
20225: [ I D 9 2 1 3 8 4 F A C I L I T Y _ A N D _ P R I O R I T
20225: Y ] a c c e p t e d c o n n e c t i o n\n\0
20225: open(0xDF800030, 0) = 14
20225: 0xDF800030: "/var/run/syslog_door"
20225: door(14, 0x080469BC) = 0
20225: getpid() = 20225 [27804]
20225: door(14, 0x080469A4) = 0
20225: close(14) = 0
20225: fcntl(13, 9, 0x00000000) = 0
20225: fcntl(13, 9, 0x00000001) = 1
20225: fcntl(13, 9, 0x00000002) = 2
20225: close(13) = 0
20225: write(3, 0x080475F4, 4) = 4
20225: 0x080475F4: "03\0\0\0"
20225: brk(0x0814F830) = 0
20225: brk(0x08153830) = 0
20225: getpeername(0, 0x08045F44, 0x08045D4C, 1) = 0
20225: AF_UNIX name =
20225: fxstat(2, 5, 0x08045AB4) = 0
20225: d=0x00740480 i=194451 m=0020666 l=1 u=0 g=3 rdev=0x00540000
20225: at = Jun 6 20:22:13 MEST 2002 [ 1023387733 ]
20225: mt = Jan 9 00:24:27 MET 2002 [ 1010532267 ]
20225: ct = Jun 6 20:22:13 MEST 2002 [ 1023387733 ]
20225: bsz=8192 blks=0 fs=ufs
20225: time() = 1039130904
20225: getpid() = 20225 [27804]
20225: putmsg(5, 0x0804516C, 0x08045160, 0) = 0
20225: ctl: maxlen=24 len=24 buf=0x08045A9C: "\0\0\0\0\0\n10\0"..
20225: \0\0\0\0\0\n10\0 lE2BEDF\0C8 xDF r11 /DEB7\0\0\0
20225: dat: maxlen=1280 len=105 buf=0x0804559C: " D e c 6 0"..
20225: D e c 6 0 0 : 2 8 : 2 4 l m t p u n i x [ 2 0 2 2 5 ] :
20225: [ I D 6 8 5 0 6 8 F A C I L I T Y _ A N D _ P R I O R I T
20225: Y ] l m t p c o n n e c t i o n p r e a u t h ' d a s
20225: p o s t m a n\n\0
20225: open(0xDF800030, 0) = 13
20225: 0xDF800030: "/var/run/syslog_door"
20225: door(13, 0x080450FC) = 0
20225: getpid() = 20225 [27804]
20225: door(13, 0x080450E4) = 0
20225: close(13) = 0
20225: uname(0x08045638) = 1
20225: sys=SunOS nod=mail rel=5.8 ver=Generic_108529-11 mch=i86pc
20225: poll(0x08045A74, 1, 0) = 0
20225: fd=0 ev=POLLRDNORM rev=0
20225: write(1, 0x0814CB20, 62) = 62
20225: T P C y r u s v 2 . 2 . p r e a l p h a r e a d y\r\nRemoved Servername here:20225: 2 2 0 i m a p . X X X X X X . X X L M
20225: time() = 1039130904
20225: poll(0x08045A74, 1, 360000) = 1
20225: fd=0 ev=POLLRDNORM rev=POLLRDNORM
20225: time() = 1039130904
20225: read(0, 0x0814BB18, 4096) = 32
20225: poll(0x08045A74, 1, 0) = 0Removed Servername here:20225: L H L O s m t p . X X X X . X X\r\n
20225: fd=0 ev=POLLRDNORM rev=0
20225: write(1, 0x0814CB20, 132) = 132
20225: 5 0 - 8 B I T M I M E\r\n 2 5 0 - E N H A N C E D S T A T U S CRemoved Servername here:20225: 2 5 0 - i m a p . X X X . X X\r\n 2
20225: O D E S\r\n 2 5 0 - P I P E L I N I N G\r\n 2 5 0 - S I Z E\r\n
20225: 2 5 0 - A U T H E X T E R N A L\r\n 2 5 0 I G N O R E Q U O
20225: T A\r\n
20225: time() = 1039130904
20225: poll(0x08045A74, 1, 360000) = 1
20225: fd=0 ev=POLLRDNORM rev=POLLRDNORM
20225: time() = 1039130904
20225: read(0, 0x0814BB18, 4096) = 36
20225: M A I L F r o m : < c s @ s c h u l t e . i t > S I Z E = 7
20225: 5 9\r\n
20225: poll(0x08045A74, 1, 0) = 0Ceck for the suthdown textfile:20225: open(0x08047170, 0) Err#2 ENOENT
No file found!:20225: 0x08047170: "/var/imap/msg/shutdown"
20225: fd=0 ev=POLLRDNORM rev=0
20225: write(1, 0x0814CB20, 14) = 14
20225: 2 5 0 2 . 1 . 0 o k\r\n
20225: time() = 1039130904
20225: poll(0x08045A74, 1, 360000) = 1
20225: fd=0 ev=POLLRDNORM rev=POLLRDNORM
20225: time() = 1039130904
20225: read(0, 0x0814BB18, 4096) = 47
20225: i n >\r\n D A T A\r\nChanged from real foldername:20225: R C P T T o : < + s h a r e d f o l d e r @ d o m a
20225: open(0x08047170, 0) Err#2 ENOENT
20225: 0x08047170: "/var/imap/msg/shutdown"
20225: fcntl(10, 7, 0x0804547C) = 0
20225: typ=F_RDLCK whence=SEEK_SET start=0 len=0 sys=0 pid=0
20225: fxstat(2, 10, 0x08045558) = 0
20225: d=0x00740480 i=1687531 m=0100660 l=1 u=104 g=104 sz=24404
20225: at = Dec 6 00:26:43 MET 2002 [ 1039130803 ]
20225: mt = Dec 5 11:41:46 MET 2002 [ 1039084906 ]
20225: ct = Dec 5 11:41:46 MET 2002 [ 1039084906 ]
20225: bsz=8192 blks=48 fs=ufs
20225: xstat(2, 0x08140A08, 0x080454D0) = 0
20225: 0x08140A08: "/var/imap/mailboxes.db"
20225: d=0x00740480 i=1687531 m=0100660 l=1 u=104 g=104 sz=24404
20225: at = Dec 6 00:26:43 MET 2002 [ 1039130803 ]
20225: mt = Dec 5 11:41:46 MET 2002 [ 1039084906 ]
20225: ct = Dec 5 11:41:46 MET 2002 [ 1039084906 ]
20225: bsz=8192 blks=48 fs=ufs
20225: fcntl(10, 7, 0x080455BC) = 0
20225: typ=F_UNLCK whence=SEEK_SET start=0 len=0 sys=0 pid=44
20225: fcntl(10, 7, 0x0804545C) = 0
20225: typ=F_RDLCK whence=SEEK_SET start=0 len=0 sys=134503092 pid=135537376
20225: fxstat(2, 10, 0x08045538) = 0
20225: d=0x00740480 i=1687531 m=0100660 l=1 u=104 g=104 sz=24404
20225: at = Dec 6 00:26:43 MET 2002 [ 1039130803 ]
20225: mt = Dec 5 11:41:46 MET 2002 [ 1039084906 ]
20225: ct = Dec 5 11:41:46 MET 2002 [ 1039084906 ]
20225: bsz=8192 blks=48 fs=ufs
20225: xstat(2, 0x08140A08, 0x080454B0) = 0
20225: 0x08140A08: "/var/imap/mailboxes.db"
20225: d=0x00740480 i=1687531 m=0100660 l=1 u=104 g=104 sz=24404
20225: at = Dec 6 00:26:43 MET 2002 [ 1039130803 ]
20225: mt = Dec 5 11:41:46 MET 2002 [ 1039084906 ]
20225: ct = Dec 5 11:41:46 MET 2002 [ 1039084906 ]
20225: bsz=8192 blks=48 fs=ufs
20225: fcntl(10, 7, 0x0804559C) = 0
20225: typ=F_UNLCK whence=SEEK_SET start=0 len=0 sys=0 pid=44
20225: open(0x08044730, 02) = 13
20225: fxstat(2, 13, 0x080446A8) = 0Changed the names:20225: 0x08044730: "/var/spool/imap/domain/domain/sharedfolder/cyrus.header"
20225: d=0x00740480 i=2728633 m=0100600 l=1 u=104 g=104 sz=169
20225: at = Dec 6 00:26:43 MET 2002 [ 1039130803 ]
20225: mt = Nov 15 02:52:31 MET 2002 [ 1037325151 ]
20225: ct = Nov 15 02:52:31 MET 2002 [ 1037325151 ]
20225: bsz=8192 blks=2 fs=ufs
20225: mmap(0x00000000, 169, 0x0001, 0x0001, 13, 0) = 0xDE2E0000
20225: open(0x08044770, 02) = 14
20225: fxstat(2, 14, 0x08044618) = 0Changed foldername:20225: 0x08044770: "/var/spool/imap/domain/domain/sharedfolder/cyrus.index"
20225: d=0x00740480 i=2728490 m=0100600 l=1 u=104 g=104 sz=10320
20225: at = Dec 6 00:26:43 MET 2002 [ 1039130803 ]
20225: mt = Dec 6 00:16:36 MET 2002 [ 1039130196 ]
20225: ct = Dec 6 00:16:36 MET 2002 [ 1039130196 ]
20225: bsz=8192 blks=22 fs=ufs
20225: mmap(0x00000000, 24576, 0x0001, 0x0001, 14, 0) = 0xDE2D0000
20225: open(0x08044770, 02) = 15
20225: fxstat(2, 15, 0x080446E8) = 0Changed foldername:20225: 0x08044770: "/var/spool/imap/domain/domain/sharedfolder/cyrus.cache"
20225: d=0x00740480 i=2728617 m=0100600 l=1 u=104 g=104 sz=360304
20225: at = Dec 6 00:26:43 MET 2002 [ 1039130803 ]
20225: mt = Dec 6 00:16:36 MET 2002 [ 1039130196 ]
20225: ct = Dec 6 00:16:36 MET 2002 [ 1039130196 ]
20225: bsz=8192 blks=720 fs=ufs
20225: mmap(0x00000000, 368640, 0x0001, 0x0001, 15, 0) = 0xDE270000
20225: fxstat(2, 14, 0x08044628) = 0
20225: d=0x00740480 i=2728490 m=0100600 l=1 u=104 g=104 sz=10320
20225: at = Dec 6 00:28:24 MET 2002 [ 1039130904 ]
20225: mt = Dec 6 00:16:36 MET 2002 [ 1039130196 ]
20225: ct = Dec 6 00:16:36 MET 2002 [ 1039130196 ]
20225: bsz=8192 blks=22 fs=ufs
20225: close(13) = 0
20225: munmap(0xDE2E0000, 169) = 0
20225: close(14) = 0
20225: munmap(0xDE2D0000, 24576) = 0
20225: close(15) = 0
20225: munmap(0xDE270000, 368640) = 0
20225: open(0x08047170, 0) Err#2 ENOENT
20225: 0x08047170: "/var/imap/msg/shutdown"
20225: time() = 1039130904
20225: brk(0x08153830) = 0
20225: brk(0x08159830) = 0
20225: getpid() = 20225 [27804]
20225: fcntl(10, 7, 0x08042F5C) = 0
20225: typ=F_RDLCK whence=SEEK_SET start=0 len=0 sys=0 pid=0
20225: fxstat(2, 10, 0x08043038) = 0
20225: d=0x00740480 i=1687531 m=0100660 l=1 u=104 g=104 sz=24404
20225: at = Dec 6 00:26:43 MET 2002 [ 1039130803 ]
20225: mt = Dec 5 11:41:46 MET 2002 [ 1039084906 ]
20225: ct = Dec 5 11:41:46 MET 2002 [ 1039084906 ]
20225: bsz=8192 blks=48 fs=ufs
20225: xstat(2, 0x08140A08, 0x08042FB0) = 0
20225: 0x08140A08: "/var/imap/mailboxes.db"
20225: d=0x00740480 i=1687531 m=0100660 l=1 u=104 g=104 sz=24404
20225: at = Dec 6 00:26:43 MET 2002 [ 1039130803 ]
20225: mt = Dec 5 11:41:46 MET 2002 [ 1039084906 ]
20225: ct = Dec 5 11:41:46 MET 2002 [ 1039084906 ]
20225: bsz=8192 blks=48 fs=ufs
20225: fcntl(10, 7, 0x0804309C) = 0
20225: typ=F_UNLCK whence=SEEK_SET start=0 len=0 sys=0 pid=-1
20225: 0x08043680: ""I think here is the error!!!:20225: open(0x08043280, 01402, 0666) Err#13 EACCES
No access to this filename here:20225: 0x08043280: "20225-1039130904"
And here also!!!:20225: mkdir(0x08043680, 0755) Err#2 ENOENT
20225: fxstat(2, 5, 0x08043024) = 0
20225: d=0x00740480 i=194451 m=0020666 l=1 u=0 g=3 rdev=0x00540000
20225: at = Jun 6 20:22:13 MEST 2002 [ 1023387733 ]
20225: mt = Jan 9 00:24:27 MET 2002 [ 1010532267 ]
20225: ct = Jun 6 20:22:13 MEST 2002 [ 1023387733 ]
20225: bsz=8192 blks=0 fs=ufs
20225: time() = 1039130904
20225: getpid() = 20225 [27804]
20225: putmsg(5, 0x080426DC, 0x080426D0, 0) = 0
20225: ctl: maxlen=24 len=24 buf=0x0804300C: "\0\0\0\0\0\010\0"..
20225: \0\0\0\0\0\010\0\0\0\0\0\0\0\0\0\0\0\0\0B3\0\0\0
20225: dat: maxlen=1280 len=129 buf=0x08042B0C: " D e c 6 0"..
20225: D e c 6 0 0 : 2 8 : 2 4 l m t p u n i x [ 2 0 2 2 5 ] :
20225: [ I D 1 5 2 5 8 5 F A C I L I T Y _ A N D _ P R I O R I T
20225: Y ] c o u l d n ' t c r e a t e s t a g e d i r e c t o
20225: r y : : N o s u c h f i l e o r d i r e c t o r y\n
20225: \0
20225: open(0xDF800030, 0) = 13
20225: 0xDF800030: "/var/run/syslog_door"
20225: door(13, 0x0804266C) = 0
20225: getpid() = 20225 [27804]
20225: door(13, 0x08042654) = 0
20225: close(13) = 0
20225: fxstat(2, 5, 0x08043024) = 0
20225: d=0x00740480 i=194451 m=0020666 l=1 u=0 g=3 rdev=0x00540000
20225: at = Jun 6 20:22:13 MEST 2002 [ 1023387733 ]
20225: mt = Jan 9 00:24:27 MET 2002 [ 1010532267 ]
20225: ct = Jun 6 20:22:13 MEST 2002 [ 1023387733 ]
20225: bsz=8192 blks=0 fs=ufs
20225: time() = 1039130904
20225: getpid() = 20225 [27804]
20225: putmsg(5, 0x080426DC, 0x080426D0, 0) = 0
20225: ctl: maxlen=24 len=24 buf=0x0804300C: "\0\0\0\0\0\010\0"..
20225: \0\0\0\0\0\010\0\0\0\0\0\0\0\0\0\0\0\0\0B3\0\0\0
20225: dat: maxlen=1280 len=143 buf=0x08042B0C: " D e c 6 0"..
20225: D e c 6 0 0 : 2 8 : 2 4 l m t p u n i x [ 2 0 2 2 5 ] :
20225: [ I D 5 1 9 0 3 6 F A C I L I T Y _ A N D _ P R I O R I T
20225: Y ] I O E R R O R : c r e a t i n g m e s s a g e f i l
20225: e 2 0 2 2 5 - 1 0 3 9 1 3 0 9 0 4 : N o s u c h f i l e
20225: o r d i r e c t o r y\n\0
20225: open(0xDF800030, 0) = 13
20225: 0xDF800030: "/var/run/syslog_door"
20225: door(13, 0x0804266C) = 0
20225: getpid() = 20225 [27804]
20225: door(13, 0x08042654) = 0
20225: close(13) = 0
20225: poll(0x08045A74, 1, 0) = 0
20225: fd=0 ev=POLLRDNORM rev=0
20225: write(1, 0x0814CB20, 81) = 81
20225: 2 5 0 2 . 1 . 5 o k\r\n 4 5 1 4 . 3 . 2 c a n n o t c
20225: r e a t e t e m p o r a r y f i l e : N o s u c h f i
20225: l e o r d i r e c t o r y\r\n
20225: time() = 1039130904
20225: poll(0x08045A74, 1, 360000) = 1
20225: fd=0 ev=POLLRDNORM rev=POLLRDNORM
20225: time() = 1039130904
20225: read(0, 0x0814BB18, 4096) = 6
20225: 0x0814BB18: " Q U I T\r\n"
20225: write(1, 0x0814CB20, 15) = 15
20225: 2 2 1 2 . 0 . 0 b y e\r\n
20225: close(0) = 0
20225: close(1) = 0
20225: close(2) = 0
20225: write(3, 0x080475F0, 4) = 4
20225: 0x080475F0: "01\0\0\0"
20225: sigaction(0x0000000E, 0x08047554, 0x00000000) = 0
20225: new: hand = 0xDF7AA3A4 mask = 0 0 0 0 flags = 0x0002
20225: alarm(60) = 0
20225: fcntl(12, 7, 0x0804758C) = 0
20225: typ=F_WRLCK whence=SEEK_SET start=0 len=0 sys=60 pid=134510128
20225: accept(4, 0x00000000, 0x00000000, 1) (sleeping...)
mailbox/domain info. If you don't want the list to see it (I don't know
why you would care), then send it to me directly.
Have you tried any other shared folder? Have you tried deleting this
folder and then recreating it?
What other options are you using in imapd.conf? altnamespace,
unixhiersep?
Dec 6 23:15:00 mail lmtpunix[3329]: [ID 152585 local6.error] couldn't
create stage directory: : No such file or directory
Dec 6 23:15:00 mail lmtpunix[3329]: [ID 519036 local6.error] IOERROR:
creating message file 3329-1039212900: No such file or directory
I think these logentries get logged in the append_newstage function
defined in imap/append.c
The code which does that seems to be:
/* xxx check errors */
mboxlist_findstage(mailboxname, stagedir);
strcpy(stagefile, stagedir);
strcat(stagefile, stage->fname);
/* create this file and put it into stage->parts[0] */
f = fopen(stagefile, "w+");
if (!f) {
if (mkdir(stagedir, 0755) != 0) {
syslog(LOG_ERR, "couldn't create stage directory: %s: %m",
stagedir);
} else {
syslog(LOG_NOTICE, "created stage directory %s",
stagedir);
f = fopen(stagefile, "w+");
}
}
if (!f) {
syslog(LOG_ERR, "IOERROR: creating message file %s: %m",
stagefile);
*stagep = NULL;
return NULL;
}
So:
syslog(LOG_ERR, "couldn't create stage directory: %s: %m",
stagedir);
with stagedir containing no data! Else its' value would have been
printed in the syslog:
syslog(LOG_ERR, "IOERROR: creating message file %s: %m",
stagefile);
the value of stagefile is 3329-1039212900 and trying to create a file
like that cyrus would create it in its' actual working directory, right
? But shouldnt there be something like /var/spool/imap/stage. or so in
front of the actual filename ?
The communication between sendmail and lmtpd is exactly as it should be
but produces these errors. The shared folder exists, I can subscribe to
it and drag messages into it. Only delivery fails...
My imapd.conf file looks like:
configdirectory: /var/imap
partition-default: /var/spool/imap
admins: schulte
defaultdomain: epag.net
sasl_pwcheck_method: auxprop
sasl_auxprop_plugin: mysql
sasl_allowanonymouslogin: no
sasl_allowplaintext: yes
sasl_mech_list: PLAIN LOGIN
sasl_mysql_user: sasl
sasl_mysql_passwd: ********
sasl_mysql_hostnames: localhost
sasl_mysql_database: admin
sasl_mysql_statement: select password from SASLUser where login='%u' and
domain='%r' and IMAP='YES'
tls_cert_file: /usr/local/var/imap/server.pem
tls_key_file: /usr/local/var/imap/server.pem
tls_ca_file: /usr/local/var/imap/CAcert.pem
idlesocket: /var/imap/socket/idle
unixhierarchysep: yes
You've finally given me enough info to go on! Apply this patch or
update from CVS:
http://bugzilla.andrew.cmu.edu/cgi-bin/cvsweb.cgi/src/cyrus/imap/lmtpd.c.diff?r1=1.99.2.17&r2=1.99.2.18&f=u
If I only would know how to use the gdb to step through sourcecode I could have provided you with more detailed information or even a patch but I am totally not used in using this thing...
--Christian--
