Sendmail can do LMTP too. There should be a .mc config file in the cyrus
distribution which is a good starting point. I've had it working with sendmail,
but switched to postfix for its simplicity in configuration and its claim of
being more secure than sendmail (buffer overflows, etc.)....but we'll see about
that.
-Shawn
Stefano Coatti wrote:
> Sigh, I can't install Postfix in place of sendmail so I've to abandon the
> feature vacation message with Cyrus.
> Thank you very much again.
>
> Best Regards
>
> -----Original Message-----
> From: Shawn Sivy [mailto:[EMAIL PROTECTED]]
> Sent: venerd́ 8 giugno 2001 14.33
> To: Stefano Coatti
> Subject: Re: Sieve Vacation
>
> There reason I think you need to use LMTP mode is because I had the same
> problem and found this message in the cyrus list archives. With the -l
> switch on deliver vacation started working. I've since switched to
> using Postfix over Sendmail, but that's another story.
>
> -Shawn Sivy
>
> ============================================================================
> ======
> Mika Tuupola wrote:
> >
> > Been testing Sieve this morning using .sieve file in
> > users homedirs. I can make simple reject scripts work
> > but can't figure out how vacation works. Whats wrong
> > with this script
> >
> > require "vacation";
> > vacation :days 1 :addresses "[EMAIL PROTECTED]"
> > "Im on vacation...";
> >
> > I know it should send the vacation message back only
> > once, but I haven't got it even once. I'm running
> > Cyrus IMAP4 v1.6.22.
>
> First, check imapd.log for errors. Are you running deliver in LMTP
> mode
> (-l switch)? Vacation will not be available unless you're using
> LMTP.
>
> Second, who is sending you the test message? If it is coming from
> your
> own address, it won't work. The built-in loop control will prevent
> you
> from sending a vacation response to yourself. Try from a different
> account or address.
> --
> Kenneth Murchison Oceana Matrix Ltd.
> Software Engineer 21 Princeton Place
> 716-662-8973 x26 Orchard Park, NY 14127
> --PGP Public Key-- http://www.oceana.com/~ken/ksm.pgp
> ============================================================================
> ======
>
> Stefano Coatti wrote:
> >
> > No, I use sendmail but I never read in the documentation that it was a
> > required.
> > Maybe I make a mistake.
> > In the past, I tried to use deliver instead of sendmail but I had a
> problem.
> > It terminates (signaled 127) when it's invoked. I saw this messages in the
> > sendmail log file (not in imapd.log). So I didn't spend other time to
> solve
> > this problem because with sendmail I've no problem.
> > But, if it's sure that deliver is a requirement for vacation, then I'll
> try
> > again to use it.
> > Thank you very much.
> >
> > Regards
> > Stefano
> >
> > -----Original Message-----
> > From: Shawn Sivy [mailto:[EMAIL PROTECTED]]
> > Sent: venerd́ 8 giugno 2001 3.40
> > To: Stefano Coatti
> > Cc: 'Ken Murchison'; Cyrus List (E-mail)
> > Subject: Re: Sieve Vacation
> >
> > Are you using LMTP as your delivery mechanism (deliver -l or direct to
> > lmtp socket)? I believe this is required for the "vacation" feature in
> > Sieve to work.
> >
> > -Shawn Sivy
> >
> > Stefano Coatti wrote:
> > >
> > > Hi,
> > > I installed cyrus 2.0.14 with sendmail 8.11.4 and with this sieve
> script:
> > >
> > > vacation :addresses "[EMAIL PROTECTED]" "test";
> > > redirect "[EMAIL PROTECTED]";
> > > keep;
> > >
> > > and the result is: no vacation message, mail redirected to [EMAIL PROTECTED]
> > and
> > > kept in the inbox of the user.
> > > I don't understand. Could you help me?
> > >
> > > Bacioni
> > > Siur K.
> > > ---------------------------------------
> > > __O Stefano Coatti - MAP
> > > _-\<,_ Inferentia S.p.A.
> > > (_)/ (_) Tel. 02.59928.258
