Hi, > I'm not sure what a "p910nd" is? here is short description of p910nd taken from it's man page:
p910nd is a small daemon that copies any data received on the port it is listening on to the corresponding printer port. It is primarily intended for diskless Linux hosts running as printer drivers but there is no reason why it could not be used on diskful hosts. Port 9100 is copied to /dev/lp0, 9101 to /dev/lp1 and 9102 to /dev/lp2. The default is port 9100 to /dev/lp0. ... If operating with CUPS, this is supported as the AppSocket protocol, also known as the JetDirect (probably TM) protocol. > You must use the "hp:" backend to be able to use the toolbox and other > HPLIP That's what I'm trying to do:-). > utilities. For the easiest install, use "hp-setup". As I wrote, I tried to install the printer with hp-setup, but it didn't find any printer at address where p910nd is running, in fact that's the main problem. When I'm using this printer+p910nd from windows, it works perfectly (I set it up as RAW socket). Do you have any ideas, why hp-setup at my computer couldn't find printer at network computer to which it is attached to and where p910nd is running? dwelch91 napsal(a): > HPLIP only supports HP JetDirect network devices (others may work, but they > are untested). A 920C should work fine with one. > > I'm not sure what a "p910nd" is? > > You must use the "hp:" backend to be able to use the toolbox and other > HPLIP > utilities. For the easiest install, use "hp-setup". > > -Don > > > On 5/6/07, František Řezáč <[EMAIL PROTECTED]> wrote: >> >> Hi, >> is it possible to use hp:/ CUPS backend with DeskJet 920c available via >> p910nd printer daemon over network? I can print with socket:// backend, >> but the printer is not visible in hp-toolbox. hp-setup couldn't find any >> device at specified address, so it is propably not possible. In >> "supported devices" section of hplip web pages it is written, that this >> printer doesn't support network, but in footnotes it is written that >> some configurations with JetDirect may work and faq should be consulted. >> But there is no detailed info there... >> -- >> František Řezáč >> Prague, Czech Republic >> >> ----------------------------------------- >> Mobile - Vodafone: +420776161038 >> Email: [EMAIL PROTECTED] >> [EMAIL PROTECTED] >> ICQ: 136 711 945 >> Jabber: [EMAIL PROTECTED] >> Skype: calavera.info >> www: http://www.calavera.info >> ----------------------------------------- >> a.k.a. Manuel Calavera >> ----------------------------------------- >> Oko za oko a svět bude slepý. >> >> ------------------------------------------------------------------------- >> This SF.net email is sponsored by DB2 Express >> Download DB2 Express C - the FREE version of DB2 express and take >> control of your XML. No limits. Just data. Click to get it now. >> http://sourceforge.net/powerbar/db2/ >> _______________________________________________ >> HPLIP-Help mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/hplip-help >> -- František Řezáč Prague, Czech Republic ----------------------------------------- Mobile - Vodafone: +420776161038 Email: [EMAIL PROTECTED] [EMAIL PROTECTED] ICQ: 136 711 945 Jabber: [EMAIL PROTECTED] Skype: calavera.info www: http://www.calavera.info ----------------------------------------- a.k.a. Manuel Calavera ----------------------------------------- Oko za oko a svět bude slepý. ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ HPLIP-Help mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/hplip-help
