Any thoughts?

Or am I going to have to do a clean install?

Thanks for any help.

Jeff

On Thu, 2006-11-02 at 21:16 +0100, Jeffrey Ratcliffe wrote:
> On Thu, 2006-11-02 at 08:48 -0800, Aaron J Albright wrote: 
> > I'm not sure why satisfying the deps is being a problem. I've install 
> > and tested on edgy a number of times with no issues.  I'm thinking there 
> > may be a system problem.  Did you do a clean install of edgy or 
> > dist-upgrade?
> 
> I did a dist-upgrade.
> 
> On Wed, 2006-11-01 at 14:25 -0800, dwelch91 wrote:
> > Attached. Drop the file into the hplip install directory (this can be
> > determined by looking at home= in /etc/hp/hplip.conf). Then open a
> > shell and run "python ./check.py" in that location.
> 
> Thanks! The output is below. It complains about missing libcrypto and
> libusb, which are both installed. cups-devel and libnetsnmp-devel are
> not, although I imagine they are only needed to install from source.
> 
> 'hpaio' in /etc/sane.d/dll.conf'...
> error: Not found. SANE backend 'hpaio' not properly setup (needs to be
> added to /etc/sane.d/dll.conf). hpaio is not listed
> in /etc/sane.d/dll.conf, but it is in /etc/sane.d/dll.d/hplip
> 
> Any thoughts? Thanks for the help.
> 
> Jeff
> 
> /usr/lib/hplip$ ./check.py 
> 
> 
> 
> HP Linux Imaging and Printing System (ver. 1.6.9)
> Dependency/Version Check Utility ver. 5.0
> 
> Copyright (c) 2003-6 Hewlett-Packard Development Company, LP
> This software comes with ABSOLUTELY NO WARRANTY.
> This is free software, and you are welcome to distribute it
> under certain conditions. See COPYING file for more details.
> 
> 
> ---------------
> | SYSTEM INFO |
> ---------------
> 
> Basic system information:
>  Linux desktop1-ubuntu 2.6.17-10-386 #2 Fri Oct 13 18:41:40 UTC 2006
> i686 GNU/Linux
> 
> Detected distro (/etc/issue):
> ubuntu 6.1
> 
> Detected distro (lsb_release):
>  Ubuntu 6.10 (edgy)
> 
> Currently installed HPLIP version...
> HPLIP 1.6.9 currently installed in '/usr/lib/hplip'.
> 
> Current contents of '/etc/hp/hplip.conf' file:
> # hplip.conf
> 
> [hpiod]
> # port=0 (dynamic IP port)
> port=2208 (IANA IP port)
> [hpssd]
> # port=0 (dynamic IP port)
> port=2207 (IANA IP port)
> 
> [hplip]
> version=1.6.9
> jdprobe=0
> 
> [dirs]
> home=/usr/lib/hplip
> run=/var/run/hplip
> ppd=/usr/share/ppd
> doc=/usr/share/doc/hplip-doc/HTML
> 
> # Following values are determined at configure time and cannot be
> changed.
> [configure]
> network-build=1
> pp-build=1
> gui-build=1
> scanner-build=1
> fax-build=1
> 
> 
> HPLIP running?
>  Yes, HPLIP is running (OK).
> 
> HPOJ running?
>  No, HPOJ is not running (OK).
> 
> Checking Python version...
> OK, version 2.4.4 installed
> 
> Checking PyQt version...
> OK, version 3.16 installed.
> 
> Checking SIP version...
> OK, Version 4.4.5 installed
> 
> ----------------
> | DEPENDENCIES |
> ----------------
> 
>  
> Checking for dependency libcrypto - OpenSSL cryptographic library...
> error: Not found!
> error: This is a REQUIRED dependency. Please make sure that this
> dependency is installed before installing or running HPLIP.
> 
> Checking for dependency gcc - GNU Project C and C++ Compiler...
>  OK, found.
> 
> Checking for dependency SANE - Scanning library...
> OK, found.
> 
> Checking for dependency GhostScript - PostScript and PDF language
> interpreter and previewer...
>  OK, found.
> 
> Checking for dependency libjpeg - JPEG library...
> OK, found.
> 
> Checking for dependency libpthread - POSIX threads library...
> OK, found.
> 
> Checking for dependency make - GNU make utility to maintain groups of
> programs...
>  OK, found.
> 
> Checking for dependency python-devel - Python development files...
> OK, found.
> 
> Checking for dependency Reportlab - PDF library for Python...
> OK, found.
> 
> Checking for dependency PyQt - Qt interface for Python...
> OK, found.
> 
> Checking for dependency cups-devel- Common Unix Printing System
> development files...
> error: Not found!
> error: This is a REQUIRED dependency. Please make sure that this
> dependency is installed before installing or running HPLIP.
> 
> Checking for dependency ppdev - Parallel port support kernel module....
>  error: Not found!
> This is an OPTIONAL dependency. Some HPLIP functionality may not
> function properly.
> 
> Checking for dependency libusb - USB library...
> error: Not found!
> error: This is a REQUIRED dependency. Please make sure that this
> dependency is installed before installing or running HPLIP.
> 
> Checking for dependency scanimage - Shell scanning program...
>  OK, found.
> 
> Checking for dependency libnetsnmp-devel - SNMP networking library
> development files...
> error: Not found!
> error: This is a REQUIRED dependency. Please make sure that this
> dependency is installed before installing or running HPLIP.
> 
> Checking for dependency Python 2.2 or greater - Python programming
> language...
> OK, found.
> 
> Checking for dependency LSB - Linux Standard Base support...
> OK, found.
> 
> Checking for dependency xsane - Graphical scanner frontend for SANE...
>  OK, found.
> 
> Checking for dependency cups - Common Unix Printing System...
>  OK, found.
> 
> Checking for dependency Python 2.3 or greater - Required for fax
> functionality...
> OK, found.
> 
> 
> ----------------------
> | INSTALLED PRINTERS |
> ----------------------
> 
>  
> OfficeJet-5500
> --------------
> Device URI: hp:/usb/officejet_5500_series?serial=MY42QF209H96
> Installed in HPLIP? Yes
> PPD: /etc/cups/ppd/OfficeJet-5500.ppd
> PPD Description: HP OfficeJet 5500 Foomatic/hpijs (recommended)
>  Printer status: printer OfficeJet-5500 is idle.  enabled since Thu 02
> Nov 2006 18:57:47 CET
> 
> 
> 
> ----------------------
> | SANE CONFIGURATION |
> ----------------------
> 
> 'hpaio' in /etc/sane.d/dll.conf'...
> error: Not found. SANE backend 'hpaio' not properly setup (needs to be
> added to /etc/sane.d/dll.conf).
> 
> Checking output of 'scanimage -L'...
>  device `v4l:/dev/video1' is a Noname UNKNOWN/GENERIC virtual device
> device `v4l:/dev/video0' is a Noname UNKNOWN/GENERIC virtual device
> device `hpaio:/usb/officejet_5500_series?serial=MY42QF209H96' is a hp
> officejet_5500_series multi-function peripheral
> default device is `hpaio:/usb/officejet_5500_series?serial=MY42QF209H96'
> 
> 
> ---------------------
> | PYTHON EXTENSIONS |
> ---------------------
> 
> Checking 'cupsext' CUPS extension...
> OK, found.
> 
> Checking 'pcardext' Photocard extension...
> OK, found.
> 
> 
> 6 errors were detected.
> Please refer to the installation instructions at:
> http://hplip.sourceforge.net/install/index.html
> 
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________ HPLIP-Help mailing list 
> [email protected] 
> https://lists.sourceforge.net/lists/listinfo/hplip-help

Attachment: signature.asc
Description: This is a digitally signed message part

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
HPLIP-Help mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/hplip-help

Reply via email to