>> You seem to be right on here Dale. usbview showed my printer >> connected to the 2.0 controller and a webcam connected to the 1.1 >> controller, so I unplugged the printer and plugged the webcam into >> it's slot and it still showed up under 1.1. So there doesn't appear >> to be any slot/controller correlation. > > That probably means the controller is running in 1.1 mode > 2.0 controllers can do both > > To find out what the hardware is, look for E|U|OHCI and decode that
According to lspci -v, I have one EHCI (2.0) and one OHCI (1.1) controller. usbview has output like this: OHCI - Philips - Philips EHCI - Brother If I unplug the Brother printer and plug a Philips webcam into the same slot the Brother was plugged into, usbview shows this: OHCI - Philips - Philips EHCI So it seems like the slots do not correlate to particular controllers. - Grant
