And this is the i?86 specific part of -fsanitize=signed-integer-overflow,
split out of the huge patch. It really is dependent on the generic
parts, when commiting, I'll put both parts together.
Uros, would you mind taking a look at this?
Regtested/bootstrapped on x86_64-linux. Ok for trunk?
2013-12-04 Jakub Jelinek <ja...@redhat.com>
Marek Polacek <pola...@redhat.com>
* config/i386/i386.md (addv<mode>4, subv<mode>4, mulv<mode>4,
negv<mode>3, negv<mode>3_1): Define expands.
(*addv<mode>4, *subv<mode>4, *mulv<mode>4, *negv<mode>3): Define
insns.
--- gcc/config/i386/i386.md.mp 2013-12-04 12:15:33.508905947 +0100
+++ gcc/config/i386/i386.md 2013-12-04 12:15:39.608929341 +0100
@@ -6153,6 +6153,42 @@
[(set_attr "type" "alu")
(set_attr "mode" "QI")])
+(define_mode_attr widerintmode [(QI "HI") (HI "SI") (SI "DI") (DI "TI")])
+
+;; Add with jump on overflow.
+(define_expand "addv<mode>4"
+ [(parallel [(set (reg:CCO FLAGS_REG)
+ (eq:CCO (plus:<widerintmode>
+ (sign_extend:<widerintmode>
+ (match_operand:SWI 1 "register_operand"))
+ (sign_extend:<widerintmode>
+ (match_operand:SWI 2 "<general_operand>")))
+ (sign_extend:<widerintmode>
+ (plus:SWI (match_dup 1) (match_dup 2)))))
+ (set (match_operand:SWI 0 "register_operand")
+ (plus:SWI (match_dup 1) (match_dup 2)))])
+ (set (pc) (if_then_else
+ (eq (reg:CCO FLAGS_REG) (const_int 0))
+ (label_ref (match_operand 3))
+ (pc)))]
+ "")
+
+(define_insn "*addv<mode>4"
+ [(set (reg:CCO FLAGS_REG)
+ (eq:CCO (plus:<widerintmode>
+ (sign_extend:<widerintmode>
+ (match_operand:SWI 1 "nonimmediate_operand" "%0,0"))
+ (sign_extend:<widerintmode>
+ (match_operand:SWI 2 "<general_operand>" "<g>,<r><i>")))
+ (sign_extend:<widerintmode>
+ (plus:SWI (match_dup 1) (match_dup 2)))))
+ (set (match_operand:SWI 0 "nonimmediate_operand" "=<r>,<r>m")
+ (plus:SWI (match_dup 1) (match_dup 2)))]
+ "ix86_binary_operator_ok (PLUS, <MODE>mode, operands)"
+ "add{<imodesuffix>}\t{%2, %0|%0, %2}"
+ [(set_attr "type" "alu")
+ (set_attr "mode" "<MODE>")])
+
;; The lea patterns for modes less than 32 bits need to be matched by
;; several insns converted to real lea by splitters.
@@ -6390,6 +6426,40 @@
[(set_attr "type" "alu")
(set_attr "mode" "SI")])
+;; Subtract with jump on overflow.
+(define_expand "subv<mode>4"
+ [(parallel [(set (reg:CCO FLAGS_REG)
+ (eq:CCO (minus:<widerintmode>
+ (sign_extend:<widerintmode>
+ (match_operand:SWI 1 "register_operand"))
+ (sign_extend:<widerintmode>
+ (match_operand:SWI 2 "<general_operand>")))
+ (sign_extend:<widerintmode>
+ (minus:SWI (match_dup 1) (match_dup 2)))))
+ (set (match_operand:SWI 0 "register_operand")
+ (minus:SWI (match_dup 1) (match_dup 2)))])
+ (set (pc) (if_then_else
+ (eq (reg:CCO FLAGS_REG) (const_int 0))
+ (label_ref (match_operand 3))
+ (pc)))]
+ "")
+
+(define_insn "*subv<mode>4"
+ [(set (reg:CCO FLAGS_REG)
+ (eq:CCO (minus:<widerintmode>
+ (sign_extend:<widerintmode>
+ (match_operand:SWI 1 "nonimmediate_operand" "0,0"))
+ (sign_extend:<widerintmode>
+ (match_operand:SWI 2 "<general_operand>" "<r><i>,<r>m")))
+ (sign_extend:<widerintmode>
+ (minus:SWI (match_dup 1) (match_dup 2)))))
+ (set (match_operand:SWI 0 "nonimmediate_operand" "=<r>m,<r>")
+ (minus:SWI (match_dup 1) (match_dup 2)))]
+ "ix86_binary_operator_ok (MINUS, <MODE>mode, operands)"
+ "sub{<imodesuffix>}\t{%2, %0|%0, %2}"
+ [(set_attr "type" "alu")
+ (set_attr "mode" "<MODE>")])
+
(define_insn "*sub<mode>_3"
[(set (reg FLAGS_REG)
(compare (match_operand:SWI 1 "nonimmediate_operand" "0,0")
@@ -6704,6 +6774,59 @@
(set_attr "bdver1_decode" "direct")
(set_attr "mode" "QI")])
+;; Multiply with jump on overflow.
+(define_expand "mulv<mode>4"
+ [(parallel [(set (reg:CCO FLAGS_REG)
+ (eq:CCO (mult:<widerintmode>
+ (sign_extend:<widerintmode>
+ (match_operand:SWI48 1 "register_operand"))
+ (sign_extend:<widerintmode>
+ (match_operand:SWI48 2 "<general_operand>")))
+ (sign_extend:<widerintmode>
+ (mult:SWI48 (match_dup 1) (match_dup 2)))))
+ (set (match_operand:SWI48 0 "register_operand")
+ (mult:SWI48 (match_dup 1) (match_dup 2)))])
+ (set (pc) (if_then_else
+ (eq (reg:CCO FLAGS_REG) (const_int 0))
+ (label_ref (match_operand 3))
+ (pc)))]
+ "")
+
+(define_insn "*mulv<mode>4"
+ [(set (reg:CCO FLAGS_REG)
+ (eq:CCO (mult:<widerintmode>
+ (sign_extend:<widerintmode>
+ (match_operand:SWI 1 "nonimmediate_operand" "%rm,rm,0"))
+ (sign_extend:<widerintmode>
+ (match_operand:SWI 2 "<general_operand>" "K,<i>,mr")))
+ (sign_extend:<widerintmode>
+ (mult:SWI (match_dup 1) (match_dup 2)))))
+ (set (match_operand:SWI 0 "register_operand" "=r,r,r")
+ (mult:SWI (match_dup 1) (match_dup 2)))]
+ "!(MEM_P (operands[1]) && MEM_P (operands[2]))"
+ "@
+ imul{<imodesuffix>}\t{%2, %1, %0|%0, %1, %2}
+ imul{<imodesuffix>}\t{%2, %1, %0|%0, %1, %2}
+ imul{<imodesuffix>}\t{%2, %0|%0, %2}"
+ [(set_attr "type" "imul")
+ (set_attr "prefix_0f" "0,0,1")
+ (set (attr "athlon_decode")
+ (cond [(eq_attr "cpu" "athlon")
+ (const_string "vector")
+ (eq_attr "alternative" "1")
+ (const_string "vector")
+ (and (eq_attr "alternative" "2")
+ (match_operand 1 "memory_operand"))
+ (const_string "vector")]
+ (const_string "direct")))
+ (set (attr "amdfam10_decode")
+ (cond [(and (eq_attr "alternative" "0,1")
+ (match_operand 1 "memory_operand"))
+ (const_string "vector")]
+ (const_string "direct")))
+ (set_attr "bdver1_decode" "direct")
+ (set_attr "mode" "<MODE>")])
+
(define_expand "<u>mul<mode><dwi>3"
[(parallel [(set (match_operand:<DWI> 0 "register_operand")
(mult:<DWI>
@@ -8617,6 +8740,49 @@
[(set_attr "type" "negnot")
(set_attr "mode" "SI")])
+;; Negate with jump on overflow.
+(define_expand "negv<mode>3"
+ [(parallel [(set (reg:CCO FLAGS_REG)
+ (ne:CCO (match_operand:SWI 1 "register_operand")
+ (const_int 0)))
+ (set (match_operand:SWI 0 "register_operand")
+ (neg:SWI (match_dup 1)))])
+ (set (pc) (if_then_else
+ (eq (reg:CCO FLAGS_REG) (const_int 0))
+ (label_ref (match_operand 2))
+ (pc)))]
+ ""
+{
+ rtx minv = GEN_INT (HOST_WIDE_INT_M1U
+ << (GET_MODE_BITSIZE (<MODE>mode) - 1));
+ emit_insn (gen_negv<mode>3_1 (operands[0], operands[1], minv, operands[2]));
+ DONE;
+})
+
+(define_expand "negv<mode>3_1"
+ [(parallel [(set (reg:CCO FLAGS_REG)
+ (ne:CCO (match_operand:SWI 1 "nonimmediate_operand")
+ (match_operand:SWI 2 "const_int_operand")))
+ (set (match_operand:SWI 0 "nonimmediate_operand")
+ (neg:SWI (match_dup 1)))])
+ (set (pc) (if_then_else
+ (eq (reg:CCO FLAGS_REG) (const_int 0))
+ (label_ref (match_operand 3))
+ (pc)))]
+ "")
+
+(define_insn "*negv<mode>3"
+ [(set (reg:CCO FLAGS_REG)
+ (ne:CCO (match_operand:SWI 1 "nonimmediate_operand" "0")
+ (match_operand:SWI 2 "const_int_operand")))
+ (set (match_operand:SWI 0 "nonimmediate_operand" "=<r>m")
+ (neg:SWI (match_dup 1)))]
+ "ix86_unary_operator_ok (NEG, <MODE>mode, operands)
+ && mode_signbit_p (<MODE>mode, operands[2])"
+ "neg{<imodesuffix>}\t%0"
+ [(set_attr "type" "negnot")
+ (set_attr "mode" "<MODE>")])
+
;; Changing of sign for FP values is doable using integer unit too.
(define_expand "<code><mode>2"
Marek
