Introduce *bswaphi2 instruction pattern and enable bswaphi2 expander
also for non-movbe targets. The testcase:
unsigned short bswap8 (unsigned short val)
{
return ((val & 0xff00) >> 8) | ((val & 0xff) << 8);
}
now expands through bswaphi2 named expander.
Rewrite bswaphi_lowpart insn pattern as bswaphisi2_lowpart in the RTX form
that combine pass can use to simplify:
Trying 6, 9, 8 -> 10:
6: r99:SI=bswap(r103:SI)
9: {r107:SI=r103:SI&0xffffffffffff0000;clobber flags:CC;}
REG_DEAD r103:SI
REG_UNUSED flags:CC
8: {r106:SI=r99:SI 0>>0x10;clobber flags:CC;}
REG_DEAD r99:SI
REG_UNUSED flags:CC
10: {r104:SI=r106:SI|r107:SI;clobber flags:CC;}
REG_DEAD r107:SI
REG_DEAD r106:SI
REG_UNUSED flags:CC
Successfully matched this instruction:
(set (reg:SI 104 [ _8 ])
(ior:SI (and:SI (reg/v:SI 103 [ val ])
(const_int -65536 [0xffffffffffff0000]))
(lshiftrt:SI (bswap:SI (reg/v:SI 103 [ val ]))
(const_int 16 [0x10]))))
allowing combination of insns 6, 8, 9 and 10
when compiling the following testcase:
unsigned int bswap8 (unsigned int val)
{
return (val & 0xffff0000) | ((val & 0xff00) >> 8) | ((val & 0xff) << 8);
}
to produce:
movl %edi, %eax
xchgb %ah, %al
ret
The expansion now always goes through a clobberless form of the bswaphi
instruction. The instruction is conditionally converted to a rotate at
peephole2 pass. This significantly simplifies bswaphisi2_lowpart
insn pattern attributes.
PR target/115102
gcc/ChangeLog:
* config/i386/i386.md (bswaphi2): Also enable for !TARGET_MOVBE.
(*bswaphi2): New insn pattern.
(bswaphisi2_lowpart): Rename from bswaphi_lowpart. Rewrite
insn RTX to match the expected form of the combine pass.
Remove rol{w} alternative and corresponding attributes.
(bswsaphisi2_lowpart peephole2): New peephole2 pattern to
conditionally convert bswaphisi2_lowpart to rotlhi3_1_slp.
(bswapsi2): Update expander for rename.
(rotlhi3_1_slp splitter): Conditionally split to bswaphi2.
gcc/testsuite/ChangeLog:
* gcc.target/i386/pr115102.c: New test.
Bootstrapped and regression tested on x86_64-pc-linux-gnu {,-m32}.
Uros.
diff --git a/gcc/config/i386/i386.md b/gcc/config/i386/i386.md
index c162cd42386..375654cf74e 100644
--- a/gcc/config/i386/i386.md
+++ b/gcc/config/i386/i386.md
@@ -17210,9 +17210,7 @@ (define_split
(clobber (reg:CC FLAGS_REG))]
"reload_completed
&& (TARGET_USE_XCHGB || optimize_function_for_size_p (cfun))"
- [(parallel [(set (strict_low_part (match_dup 0))
- (bswap:HI (match_dup 0)))
- (clobber (reg:CC FLAGS_REG))])])
+ [(set (match_dup 0) (bswap:HI (match_dup 0)))])
;; Rotations through carry flag
(define_insn "rcrsi2"
@@ -20730,12 +20728,11 @@ (define_expand "bswapsi2"
operands[1] = force_reg (SImode, operands[1]);
else
{
- rtx x = operands[0];
+ rtx x = gen_reg_rtx (SImode);
- emit_move_insn (x, operands[1]);
- emit_insn (gen_bswaphi_lowpart (gen_lowpart (HImode, x)));
+ emit_insn (gen_bswaphisi2_lowpart (x, operands[1]));
emit_insn (gen_rotlsi3 (x, x, GEN_INT (16)));
- emit_insn (gen_bswaphi_lowpart (gen_lowpart (HImode, x)));
+ emit_insn (gen_bswaphisi2_lowpart (operands[0], x));
DONE;
}
})
@@ -20767,7 +20764,11 @@ (define_insn "*bswap<mode>2"
(define_expand "bswaphi2"
[(set (match_operand:HI 0 "register_operand")
(bswap:HI (match_operand:HI 1 "nonimmediate_operand")))]
- "TARGET_MOVBE")
+ ""
+{
+ if (!TARGET_MOVBE)
+ operands[1] = force_reg (HImode, operands[1]);
+})
(define_insn "*bswaphi2_movbe"
[(set (match_operand:HI 0 "nonimmediate_operand" "=Q,r,m")
@@ -20788,33 +20789,55 @@ (define_insn "*bswaphi2_movbe"
(set_attr "bdver1_decode" "double,*,*")
(set_attr "mode" "QI,HI,HI")])
+(define_insn "*bswaphi2"
+ [(set (match_operand:HI 0 "register_operand" "=Q")
+ (bswap:HI (match_operand:HI 1 "register_operand" "0")))]
+ "!TARGET_MOVBE"
+ "xchg{b}\t{%h0, %b0|%b0, %h0}"
+ [(set_attr "type" "imov")
+ (set_attr "pent_pair" "np")
+ (set_attr "athlon_decode" "vector")
+ (set_attr "amdfam10_decode" "double")
+ (set_attr "bdver1_decode" "double")
+ (set_attr "mode" "QI")])
+
(define_peephole2
[(set (match_operand:HI 0 "general_reg_operand")
(bswap:HI (match_dup 0)))]
- "TARGET_MOVBE
- && !(TARGET_USE_XCHGB || optimize_function_for_size_p (cfun))
+ "!(TARGET_USE_XCHGB ||
+ TARGET_PARTIAL_REG_STALL || optimize_function_for_size_p (cfun))
&& peep2_regno_dead_p (0, FLAGS_REG)"
[(parallel [(set (match_dup 0) (rotate:HI (match_dup 0) (const_int 8)))
(clobber (reg:CC FLAGS_REG))])])
-(define_insn "bswaphi_lowpart"
- [(set (strict_low_part (match_operand:HI 0 "register_operand" "+Q,r"))
- (bswap:HI (match_dup 0)))
- (clobber (reg:CC FLAGS_REG))]
+(define_insn "bswaphisi2_lowpart"
+ [(set (match_operand:SI 0 "register_operand" "=Q")
+ (ior:SI (and:SI (match_operand:SI 1 "register_operand" "0")
+ (const_int -65536))
+ (lshiftrt:SI (bswap:SI (match_dup 1))
+ (const_int 16))))]
""
- "@
- xchg{b}\t{%h0, %b0|%b0, %h0}
- rol{w}\t{$8, %0|%0, 8}"
- [(set (attr "preferred_for_size")
- (cond [(eq_attr "alternative" "0")
- (symbol_ref "true")]
- (symbol_ref "false")))
- (set (attr "preferred_for_speed")
- (cond [(eq_attr "alternative" "0")
- (symbol_ref "TARGET_USE_XCHGB")]
- (symbol_ref "!TARGET_USE_XCHGB")))
- (set_attr "length" "2,4")
- (set_attr "mode" "QI,HI")])
+ "xchg{b}\t{%h0, %b0|%b0, %h0}"
+ [(set_attr "type" "imov")
+ (set_attr "pent_pair" "np")
+ (set_attr "athlon_decode" "vector")
+ (set_attr "amdfam10_decode" "double")
+ (set_attr "bdver1_decode" "double")
+ (set_attr "mode" "QI")])
+
+(define_peephole2
+ [(set (match_operand:SI 0 "general_reg_operand")
+ (ior:SI (and:SI (match_dup 0)
+ (const_int -65536))
+ (lshiftrt:SI (bswap:SI (match_dup 0))
+ (const_int 16))))]
+ "!(TARGET_USE_XCHGB ||
+ TARGET_PARTIAL_REG_STALL || optimize_function_for_size_p (cfun))
+ && peep2_regno_dead_p (0, FLAGS_REG)"
+ [(parallel [(set (strict_low_part (match_dup 0))
+ (rotate:HI (match_dup 0) (const_int 8)))
+ (clobber (reg:CC FLAGS_REG))])]
+ "operands[0] = gen_lowpart (HImode, operands[0]);")
(define_expand "paritydi2"
[(set (match_operand:DI 0 "register_operand")
diff --git a/gcc/testsuite/gcc.target/i386/pr115102.c
b/gcc/testsuite/gcc.target/i386/pr115102.c
new file mode 100644
index 00000000000..e603980b3c8
--- /dev/null
+++ b/gcc/testsuite/gcc.target/i386/pr115102.c
@@ -0,0 +1,10 @@
+/* PR target/115102 */
+/* { dg-do compile } */
+/* { dg-options "-Os -march=x86-64 -dp" } */
+
+unsigned int bswap8 (unsigned int val)
+{
+ return (val & 0xffff0000) | ((val & 0xff00) >> 8) | ((val & 0xff) << 8);
+}
+
+/* { dg-final { scan-assembler "bswaphisi2_lowpart" } } */
