Pascal Schirrmann a écrit :
> I'm in France, so most program are in SECAM, I don't know if this has
> something to do with my trouble.
>
OK, I got it (and in some ways, it returns to freevo, sorry :-|).
Since long time, PVR card did work in a kind of generic PAL or generic
SACAM mode. For secam, this was a value of ff0000, witch this result :
$ v4l2-ctl -S
Video Standard = 0x00ff0000
SECAM-B/D/G/H/K/K1/L/Lc
This doesn't work anymore (at least on my system !)
But if I select the 'French secam' (that is, secam-L) :
$ v4l2-ctl -s secam-L
Standard set to 00400000
$ v4l2-ctl -S
Video Standard = 0x00400000
SECAM-L
Then the sound is back here (to be able to do that, I change the
standard in ferrvo.conf to a wrong value. So freevo complains, but the
TV has sound !)
Is there an official way to do that (without hacking a program file ?)
BTW, NICAM channel sound level is way lower than classical channels
(again, on my system). Could it be feasible to have a sound level by
channel (probably a lot of work...) ?
Thanks,
Pascal
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Freevo-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freevo-users
