You'll need to fix your device to know its IP and it should stop doing that.
/b On Dec 20, 2009, at 5:58 AM, Mark Campbell-Smith wrote: > Hi! > > I'm sure this is a NAT issue, but I'm not sure what options to use. > > I have a Linksys SPA3102, NAT'd on the internet (remotely) and > connected to my FS on the otherside of the world, which is also > natted. A PAP2T is connected on the same subnet as the FS. The 3102 > registers successfully and a call can be set up from the PAP2 to the > 3102. > > However, after FS receives the Remote SDP the audio stops (ring tone > stops in my case) > > 2009-12-20 22:29:57.848463 [DEBUG] sofia.c:3646 Channel > sofia/internal/sip:[email protected]:56885 entering state > [completing][200] > 2009-12-20 22:29:57.848463 [DEBUG] sofia.c:3657 Remote SDP: > v=0 > o=- 18490612 18490612 IN IP4 192.168.1.3 > s=- > c=IN IP4 192.168.1.3 > t=0 0 > m=audio 16432 RTP/AVP 2 100 101 > a=rtpmap:2 G726-32/8000 > a=rtpmap:100 NSE/8000 > a=fmtp:100 192-193 > a=rtpmap:101 telephone-event/8000 > a=fmtp:101 0-15 > a=ptime:20 > > I notice that the ip address in the o and c fields indicate a local IP > address. Should this IP address be an external IP address of the 3102 > instead? > > Thanks _______________________________________________ FreeSWITCH-users mailing list [email protected] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
