Hi! I'm sure this is a NAT issue, but I'm not sure what options to use.
I have a Linksys SPA3102, NAT'd on the internet (remotely) and connected to my FS on the otherside of the world, which is also natted. A PAP2T is connected on the same subnet as the FS. The 3102 registers successfully and a call can be set up from the PAP2 to the 3102. However, after FS receives the Remote SDP the audio stops (ring tone stops in my case) 2009-12-20 22:29:57.848463 [DEBUG] sofia.c:3646 Channel sofia/internal/sip:[email protected]:56885 entering state [completing][200] 2009-12-20 22:29:57.848463 [DEBUG] sofia.c:3657 Remote SDP: v=0 o=- 18490612 18490612 IN IP4 192.168.1.3 s=- c=IN IP4 192.168.1.3 t=0 0 m=audio 16432 RTP/AVP 2 100 101 a=rtpmap:2 G726-32/8000 a=rtpmap:100 NSE/8000 a=fmtp:100 192-193 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-15 a=ptime:20 I notice that the ip address in the o and c fields indicate a local IP address. Should this IP address be an external IP address of the 3102 instead? Thanks _______________________________________________ FreeSWITCH-users mailing list [email protected] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
