On Wed, 2008-01-23 at 16:28 -0500, Chris Morgan wrote: > On Jan 23, 2008 3:57 PM, Al Chu <[EMAIL PROTECTED]> wrote: > > > You know, I think the vendor does claim that but I've never had any > > > experience with ipmi before until getting these servers. I was under > > > the impression that the only way to get detailed board information was > > > via ipmi. I tried using lm-sensors previously and I believe I only got > > > information about things like fan speeds, no temperature or voltage > > > values etc. > > > > B/c it's an intel board, I'm pretty it does. Just curious, have you > > been getting identical results on multiple motherboards of this type. > > Just to rule out the possibility that one specific motherboard just > > might be bad. > > > > I just tried the ipmi-sensors -f --debug and ipmi-sensors --debug on > another one of the servers with 0.5.4-alpha that you had sent me and > I'm seeing the same results as from the other machine I've been doing > most of the testing on. I've been using 0.5.4-alpha since you mailed > it to me, just so you are aware.
Ok, thanks. I'll try and get you that new tar.gz with some other stuff as soon as I can. Just so you know, it might not be today afterall ... Al > Chris -- Albert Chu [EMAIL PROTECTED] 925-422-5311 Computer Scientist High Performance Systems Division Lawrence Livermore National Laboratory _______________________________________________ Freeipmi-users mailing list [email protected] http://lists.gnu.org/mailman/listinfo/freeipmi-users
