Hi, I justed wanted to let those who are interested know, that installing a low budget USB 1.1 PCI Card fixed the problem. Virtualbox sucessfully recognizes the device. Nevertheless iPhone-Syncing is not working, I learned this is because it requires at least USB 2.0.
This essentially is meaning that iTunes-Syncing for iOS-Devices is not available under FreeBSD-Virtualbox. Jurgen -----Original-Nachricht----- Betreff: Re: USB Virtualbox Datum: Thu, 14 May 2015 17:37:17 +0200 Von: Hans Petter Selasky <[email protected]> An: "[email protected]" <[email protected]>, "[email protected]" <[email protected]> On 05/14/15 12:20, [email protected] wrote: > I am running freebsd 10. Setting hw.usb.ehci.no_hs=1 at the loader prompt > leads to the following usbconfig (with no devices available). > > ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) > pwr=SAVE (0mA) > ugen0.1: <EHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) > pwr=SAVE (0mA) > > That's really frustrating. Maybe I have to buy pci usb host controller and > try again? Or is this not a hardware related problem? > Hi, Maybe there is a missing driver for an OHCI or UHCI driver, which is needed for FULL speed operation. Can you check output from "pciconf -lv". Else you cannot force devices into FS mode unless using a FS HUB. --HPS _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "[email protected]"
