Is there somebody interested to get ssh access on my new
DELL Laptop to find out why apm doesn't work ?
For example an /dev/apm device isn't created by devfs ...
I make this offer for 2 purposes:
a) to make it happen on my laptop of course ;-)
b) so that 5.2 will really become a great release
even for laptop users ;-)
Thanks
Andreas ///
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #0: Sun Nov 2 13:59:10 CET 2003
[EMAIL PROTECTED]:/usr/src/sys/i386/compile/AKLEMM
Preloaded elf kernel "/boot/kernel/kernel" at 0xc089d000.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1400MHz (1395.48-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x695 Stepping = 5
Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
real memory = 536535040 (511 MB)
avail memory = 511512576 (487 MB)
Pentium Pro MTRR support enabled
VESA: v2.0, 32704k memory, flags:0x1, mode table:0xc07fa0c2 (1000022)
VESA: ATI MOBILITY RADEON 9000
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00fc590
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci_cfgintr: 0:29 INTA BIOS irq 11
pci_cfgintr: 0:29 INTB BIOS irq 11
pci_cfgintr: 0:29 INTC BIOS irq 11
pci_cfgintr: 0:29 INTD BIOS irq 11
pci_cfgintr: 0:31 INTB BIOS irq 11
pci_cfgintr: 0:31 INTB BIOS irq 11
agp0: <Intel 82855 host to AGP bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci_cfgintr: 1:0 INTA BIOS irq 11
drm0: <ATI Radeon Lf R250 Mobility 9000 M9> port 0xc000-0xc0ff mem
0xfcff0000-0xfcffffff,0xe8000000-0xefffffff irq 11 at device 0.0 on pci1
info: [drm] AGP at 0xe0000000 128MB
info: [drm] Initialized radeon 1.9.0 20020828 on minor 0
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device
29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ugen0: vendor 0x413c product 0x8000, rev 1.10/5.65, addr 2
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f irq 11 at device
29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f irq 11 at device
29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
pci_cfgintr: 2:0 INTA BIOS irq 11
pci_cfgintr: 2:1 INTA BIOS irq 11
pci_cfgintr: 2:1 INTA BIOS irq 11
pci_cfgintr: 2:3 INTA BIOS irq 11
bge0: <Broadcom BCM5702 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xfaff0000-0xfaffffff
irq 11 at device 0.0 on pci2
bge0: Ethernet address: 00:0b:db:df:53:b1
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX,
auto
cbb0: <PCI-CardBus Bridge> irq 11 at device 1.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb1: <PCI-CardBus Bridge> irq 11 at device 1.1 on pci2
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
pci2: <network> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port
0xbfa0-0xbfaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pcm0: <Intel ICH4 (82801DB)> port 0xbc40-0xbc7f,0xb800-0xb8ff mem
0xf4fff400-0xf4fff4ff,0xf4fff800-0xf4fff9ff irq 11 at device 31.5 on pci0
pcm0: <SigmaTel STAC9750/51 AC97 Codec>
pci0: <simple comms> at device 31.6 (no driver attached)
orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
Timecounter "TSC" frequency 1395477984 Hz quality 800
Timecounters tick every 10.000 msec
pccard0: Card has no functions!
cbb0: PC Card card activation failed
pccard1: <unknown card> (manufacturer=0xffff, product=0x0001) at function 0
pccard1: CIS info: O2Micro, SmartCardBus Reader, V1.0
GEOM: create disk ad0 dp=0xc47d5c70
ad0: 38154MB <IC25N040ATCS05-0> [77520/16/63] at ata0-master UDMA100
acd0: CDRW <QSI CD-RW/DVD-ROM SBW-242> at ata1-master PIO4
(probe2:ata1:0:0:0): Recovered Sense
(probe2:ata1:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe2:ata1:0:0:0): CAM Status: SCSI Status Error
(probe2:ata1:0:0:0): SCSI Status: Check Condition
(probe2:ata1:0:0:0): ILLEGAL REQUEST asc:24,0
(probe2:ata1:0:0:0): Invalid field in CDB
(probe2:ata1:0:0:0): Recovered Sense
(probe2:ata1:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe2:ata1:0:0:0): CAM Status: SCSI Status Error
(probe2:ata1:0:0:0): SCSI Status: Check Condition
(probe2:ata1:0:0:0): ILLEGAL REQUEST asc:24,0
(probe2:ata1:0:0:0): Invalid field in CDB
pass0 at ata1 bus 0 target 0 lun 0
pass0: <QSI CDRW/DVD SBW-242 UD22> Removable CD-ROM SCSI-0 device
pass0: 16.000MB/s transfers
Mounting root from ufs:/dev/ad0s4a
WARNING: / was not properly dismounted
WARNING: /var was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /home was not properly dismounted
/home: mount pending error: blocks 24 files 4
WARNING: /export was not properly dismounted
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to deny,
logging disabled
machine i386
cpu I686_CPU
ident AKLEMM
options SCHED_4BSD #4BSD scheduler
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options SOFTUPDATES #Enable FFS soft updates support
options UFS_ACL #Support for access control lists
options UFS_DIRHASH #Improve performance on big directories
options MD_ROOT #MD is a potential root device
options NFSCLIENT #Network Filesystem Client
options NFSSERVER #Network Filesystem Server
options NFS_ROOT #NFS usable as /, requires NFSCLIENT
options MSDOSFS #MSDOS Filesystem
options NTFS #NTFS Filesystem
options CD9660 #ISO 9660 Filesystem
options PROCFS #Process filesystem (requires PSEUDOFS)
options PSEUDOFS #Pseudo-filesystem framework
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 #Compatible with FreeBSD4
options SCSI_DELAY=8000 #Delay (in ms) before probing SCSI
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
device isa
device eisa
device pci
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
options ATA_STATIC_ID #Static device numbering
# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
device da # Direct Access (disks)
device pass # Passthrough device (direct SCSI access)
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
device agp # support several AGP chipsets
# Floating point support - do not disable.
device npx
# Power management support (see NOTES for more options)
device apm
# Add suspend/resume support for the i8254.
device pmtimer
# PCCARD (PCMCIA) support
# Pcmcia and cardbus bridge support
device cbb # cardbus (yenta) bridge
#device pcic # ExCA ISA and PCI bridges
device pccard # PC Card (16-bit) bus
device cardbus # CardBus (32-bit) bus
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device bge # Broadcom BCM570xx Gigabit Ethernet
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# Wireless NIC cards
device wlan # 802.11 support
device an # Aironet 4500/4800 802.11 wireless NICs.
device awi # BayStack 660 and others
device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device wl # Older non 802.11 Wavelan wireless NIC.
# Pseudo devices - the number indicates how many units to allocate.
device random # Entropy device
device loop # Network loopback
device ether # Ethernet support
device sl # Kernel SLIP
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device urio # Diamond Rio 500 MP3 player
device uscanner # Scanners
# USB Ethernet, requires mii
device aue # ADMtek USB ethernet
device axe # ASIX Electronics USB ethernet
device cue # CATC USB ethernet
device kue # Kawasaki LSI USB ethernet
###########################
options RANDOM_IP_ID
options ZERO_COPY_SOCKETS
options SHOW_BUSYBUFS # List buffers that prevent root unmount
device atapicam # emulate ATAPI devices as SCSI ditto via CAM
device radeondrm
options VESA # To include support for VGA VESA video modes
device pcm # sound
device midi # midi synth.
device seq # midi sequencer
Andreas ///
--
Andreas Klemm - Powered by FreeBSD 5.1-CURRENT
Need a magic printfilter today ? -> http://www.apsfilter.org/
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
