this mail from me didn't arrive on -current, so here again
On Sun, Nov 02, 2003 at 06:37:20PM +0100, Andreas Klemm wrote:
> Is there somebody interested to get ssh access on my new
> DELL Laptop to find out why apm doesn't work ?
>
> For example an /dev/apm device isn't created by devfs ...
>
> I make this offer for 2 purposes:
> a) to make it happen on my laptop of course ;-)
> b) so that 5.2 will really become a great release
> even for laptop users ;-)
>
> Thanks
>
> Andreas ///
>
>
> Copyright (c) 1992-2003 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 5.1-CURRENT #0: Sun Nov 2 13:59:10 CET 2003
> [EMAIL PROTECTED]:/usr/src/sys/i386/compile/AKLEMM
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc089d000.
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Pentium(R) M processor 1400MHz (1395.48-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0x695 Stepping = 5
>
> Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
> real memory = 536535040 (511 MB)
> avail memory = 511512576 (487 MB)
> Pentium Pro MTRR support enabled
> VESA: v2.0, 32704k memory, flags:0x1, mode table:0xc07fa0c2 (1000022)
> VESA: ATI MOBILITY RADEON 9000
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcibios: BIOS version 2.10
> Using $PIR table, 9 entries at 0xc00fc590
> pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
> pci0: <PCI bus> on pcib0
> pci_cfgintr: 0:29 INTA BIOS irq 11
> pci_cfgintr: 0:29 INTB BIOS irq 11
> pci_cfgintr: 0:29 INTC BIOS irq 11
> pci_cfgintr: 0:29 INTD BIOS irq 11
> pci_cfgintr: 0:31 INTB BIOS irq 11
> pci_cfgintr: 0:31 INTB BIOS irq 11
> agp0: <Intel 82855 host to AGP bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on
> pci0
> pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
> pci1: <PCI bus> on pcib1
> pci_cfgintr: 1:0 INTA BIOS irq 11
> drm0: <ATI Radeon Lf R250 Mobility 9000 M9> port 0xc000-0xc0ff mem
> 0xfcff0000-0xfcffffff,0xe8000000-0xefffffff irq 11 at device 0.0 on pci1
> info: [drm] AGP at 0xe0000000 128MB
> info: [drm] Initialized radeon 1.9.0 20020828 on minor 0
> uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at
> device 29.0 on pci0
> usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> ugen0: vendor 0x413c product 0x8000, rev 1.10/5.65, addr 2
> uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f irq 11 at
> device 29.1 on pci0
> usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1
> ums0: 3 buttons and Z dir.
> uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f irq 11 at
> device 29.2 on pci0
> usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
> usb2: USB revision 1.0
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> pci0: <serial bus, USB> at device 29.7 (no driver attached)
> pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
> pci2: <PCI bus> on pcib2
> pci_cfgintr: 2:0 INTA BIOS irq 11
> pci_cfgintr: 2:1 INTA BIOS irq 11
> pci_cfgintr: 2:1 INTA BIOS irq 11
> pci_cfgintr: 2:3 INTA BIOS irq 11
> bge0: <Broadcom BCM5702 Gigabit Ethernet, ASIC rev. 0x1002> mem
> 0xfaff0000-0xfaffffff irq 11 at device 0.0 on pci2
> bge0: Ethernet address: 00:0b:db:df:53:b1
> miibus0: <MII bus> on bge0
> brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
> brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
> 1000baseTX-FDX, auto
> cbb0: <PCI-CardBus Bridge> irq 11 at device 1.0 on pci2
> cardbus0: <CardBus bus> on cbb0
> pccard0: <16-bit PCCard bus> on cbb0
> cbb0: [MPSAFE]
> cbb1: <PCI-CardBus Bridge> irq 11 at device 1.1 on pci2
> cardbus1: <CardBus bus> on cbb1
> pccard1: <16-bit PCCard bus> on cbb1
> cbb1: [MPSAFE]
> pci2: <network> at device 3.0 (no driver attached)
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH4 UDMA100 controller> port
> 0xbfa0-0xbfaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata0: [MPSAFE]
> ata1: at 0x170 irq 15 on atapci0
> ata1: [MPSAFE]
> pcm0: <Intel ICH4 (82801DB)> port 0xbc40-0xbc7f,0xb800-0xb8ff mem
> 0xf4fff400-0xf4fff4ff,0xf4fff800-0xf4fff9ff irq 11 at device 31.5 on pci0
> pcm0: <SigmaTel STAC9750/51 AC97 Codec>
> pci0: <simple comms> at device 31.6 (no driver attached)
> orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
> pmtimer0 on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model GlidePoint, device ID 0
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/8 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> unknown: <PNP0303> can't assign resources (port)
> unknown: <PNP0f13> can't assign resources (irq)
> unknown: <PNP0501> can't assign resources (port)
> unknown: <PNP0401> can't assign resources (port)
> Timecounter "TSC" frequency 1395477984 Hz quality 800
> Timecounters tick every 10.000 msec
> pccard0: Card has no functions!
> cbb0: PC Card card activation failed
> pccard1: <unknown card> (manufacturer=0xffff, product=0x0001) at function 0
> pccard1: CIS info: O2Micro, SmartCardBus Reader, V1.0
> GEOM: create disk ad0 dp=0xc47d5c70
> ad0: 38154MB <IC25N040ATCS05-0> [77520/16/63] at ata0-master UDMA100
> acd0: CDRW <QSI CD-RW/DVD-ROM SBW-242> at ata1-master PIO4
> (probe2:ata1:0:0:0): Recovered Sense
> (probe2:ata1:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0
> (probe2:ata1:0:0:0): CAM Status: SCSI Status Error
> (probe2:ata1:0:0:0): SCSI Status: Check Condition
> (probe2:ata1:0:0:0): ILLEGAL REQUEST asc:24,0
> (probe2:ata1:0:0:0): Invalid field in CDB
> (probe2:ata1:0:0:0): Recovered Sense
> (probe2:ata1:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0
> (probe2:ata1:0:0:0): CAM Status: SCSI Status Error
> (probe2:ata1:0:0:0): SCSI Status: Check Condition
> (probe2:ata1:0:0:0): ILLEGAL REQUEST asc:24,0
> (probe2:ata1:0:0:0): Invalid field in CDB
> pass0 at ata1 bus 0 target 0 lun 0
> pass0: <QSI CDRW/DVD SBW-242 UD22> Removable CD-ROM SCSI-0 device
> pass0: 16.000MB/s transfers
> Mounting root from ufs:/dev/ad0s4a
> WARNING: / was not properly dismounted
> WARNING: /var was not properly dismounted
> WARNING: /usr was not properly dismounted
> WARNING: /home was not properly dismounted
> /home: mount pending error: blocks 24 files 4
> WARNING: /export was not properly dismounted
> ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to deny,
> logging disabled
>
>
> machine i386
> cpu I686_CPU
> ident AKLEMM
>
> options SCHED_4BSD #4BSD scheduler
> options INET #InterNETworking
> options INET6 #IPv6 communications protocols
> options FFS #Berkeley Fast Filesystem
> options SOFTUPDATES #Enable FFS soft updates support
> options UFS_ACL #Support for access control lists
> options UFS_DIRHASH #Improve performance on big directories
> options MD_ROOT #MD is a potential root device
> options NFSCLIENT #Network Filesystem Client
> options NFSSERVER #Network Filesystem Server
> options NFS_ROOT #NFS usable as /, requires NFSCLIENT
> options MSDOSFS #MSDOS Filesystem
> options NTFS #NTFS Filesystem
> options CD9660 #ISO 9660 Filesystem
> options PROCFS #Process filesystem (requires PSEUDOFS)
> options PSEUDOFS #Pseudo-filesystem framework
> options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
> options COMPAT_FREEBSD4 #Compatible with FreeBSD4
> options SCSI_DELAY=8000 #Delay (in ms) before probing SCSI
> options KTRACE #ktrace(1) support
> options SYSVSHM #SYSV-style shared memory
> options SYSVMSG #SYSV-style message queues
> options SYSVSEM #SYSV-style semaphores
> options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
> options KBD_INSTALL_CDEV # install a CDEV entry in /dev
>
> device isa
> device eisa
> device pci
>
> # ATA and ATAPI devices
> device ata
> device atadisk # ATA disk drives
> device atapicd # ATAPI CDROM drives
> device atapifd # ATAPI floppy drives
> options ATA_STATIC_ID #Static device numbering
>
> # SCSI peripherals
> device scbus # SCSI bus (required for SCSI)
> device da # Direct Access (disks)
> device pass # Passthrough device (direct SCSI access)
>
> # atkbdc0 controls both the keyboard and the PS/2 mouse
> device atkbdc # AT keyboard controller
> device atkbd # AT keyboard
> device psm # PS/2 mouse
>
> device vga # VGA video card driver
>
> device splash # Splash screen and screen saver support
>
> # syscons is the default console driver, resembling an SCO console
> device sc
>
> device agp # support several AGP chipsets
>
> # Floating point support - do not disable.
> device npx
>
> # Power management support (see NOTES for more options)
> device apm
> # Add suspend/resume support for the i8254.
> device pmtimer
>
> # PCCARD (PCMCIA) support
> # Pcmcia and cardbus bridge support
> device cbb # cardbus (yenta) bridge
> #device pcic # ExCA ISA and PCI bridges
> device pccard # PC Card (16-bit) bus
> device cardbus # CardBus (32-bit) bus
>
> # Serial (COM) ports
> device sio # 8250, 16[45]50 based serial ports
>
> # Parallel port
> device ppc
> device ppbus # Parallel port bus (required)
> device lpt # Printer
> device plip # TCP/IP over parallel
> device ppi # Parallel port interface device
> #device vpo # Requires scbus and da
>
> # PCI Ethernet NICs that use the common MII bus controller code.
> # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
> device miibus # MII bus support
> device bge # Broadcom BCM570xx Gigabit Ethernet
> device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
>
> # Wireless NIC cards
> device wlan # 802.11 support
> device an # Aironet 4500/4800 802.11 wireless NICs.
> device awi # BayStack 660 and others
> device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
> #device wl # Older non 802.11 Wavelan wireless NIC.
>
> # Pseudo devices - the number indicates how many units to allocate.
> device random # Entropy device
> device loop # Network loopback
> device ether # Ethernet support
> device sl # Kernel SLIP
> device ppp # Kernel PPP
> device tun # Packet tunnel.
> device pty # Pseudo-ttys (telnet etc)
> device md # Memory "disks"
> device gif # IPv6 and IPv4 tunneling
> device faith # IPv6-to-IPv4 relaying (translation)
>
> # The `bpf' device enables the Berkeley Packet Filter.
> # Be aware of the administrative consequences of enabling this!
> device bpf # Berkeley packet filter
>
> # USB support
> device uhci # UHCI PCI->USB interface
> device ohci # OHCI PCI->USB interface
> device usb # USB Bus (required)
> #device udbp # USB Double Bulk Pipe devices
> device ugen # Generic
> device uhid # "Human Interface Devices"
> device ukbd # Keyboard
> device ulpt # Printer
> device umass # Disks/Mass storage - Requires scbus and da
> device ums # Mouse
> device urio # Diamond Rio 500 MP3 player
> device uscanner # Scanners
> # USB Ethernet, requires mii
> device aue # ADMtek USB ethernet
> device axe # ASIX Electronics USB ethernet
> device cue # CATC USB ethernet
> device kue # Kawasaki LSI USB ethernet
>
> ###########################
>
> options RANDOM_IP_ID
> options ZERO_COPY_SOCKETS
>
> options SHOW_BUSYBUFS # List buffers that prevent root unmount
>
> device atapicam # emulate ATAPI devices as SCSI ditto via CAM
>
> device radeondrm
> options VESA # To include support for VGA VESA video modes
>
> device pcm # sound
> device midi # midi synth.
> device seq # midi sequencer
> Andreas ///
>
> --
> Andreas Klemm - Powered by FreeBSD 5.1-CURRENT
> Need a magic printfilter today ? -> http://www.apsfilter.org/
Andreas ///
--
Andreas Klemm - Powered by FreeBSD 5.1-CURRENT
Need a magic printfilter today ? -> http://www.apsfilter.org/
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
