On May 2, 11:58pm, Don Lewis wrote:
} Subject: Re: ppbus causes hangs?
} On Apr 29, 7:41pm, Mike Smith wrote:
} } Subject: Re: ppbus causes hangs?
} }
} } Try setting the flags on the 'ppc' device to 0x40 and _please_ report
} } the results.
}
} I also ran into this problem with a 4/30/1999 version of 3.1-stable
} on a Dell Dimension XPS R400. The 0x40 flag fixed the problem.
I forgot to include /var/run/dmesg.boot.
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.1-STABLE #1: Fri Apr 30 22:18:51 PDT 1999
gd...@gvpc85.gv.tsc.tdk.com:/usr/src/sys/compile/TSC_INTERNAL
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Xeon/Celeron (398.27-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping=2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,<b24>>
real memory = 67108864 (65536K bytes)
config> di wt0
config> di mcd0
config> di matcdc0
config> di scd0
config> di ie0
config> di aha0
avail memory = 62017536 (60564K bytes)
Preloaded elf kernel "kernel" at 0xc031c000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc031c09c.
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge> rev 0x03 on pci0.0.0
chip1: <Intel 82443BX host to AGP bridge> rev 0x03 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x02 int a irq 11 on
pci0.13.0
fxp0: Ethernet address 00:a0:c9:75:7c:8f
fxp1: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x02 int a irq 15 on
pci0.15.0
fxp1: Ethernet address 00:a0:c9:75:7b:99
ahc0: <Adaptec 2940 Ultra2 SCSI adapter> rev 0x00 int a irq 9 on pci0.16.0
ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
Probing for devices on PCI bus 1:
vga0: <VGA-compatible display device> rev 0x21 int a irq 11 on pci1.0.0
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 not found
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1 not found at 0x2f8
ppc0 at 0x378 irq 7 flags 0x40 on isa
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 not found at 0x1f0
wdc1 not found at 0x170
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
Waiting 2 seconds for SCSI devices to settle
changing root device to da0s1a
da1 at ahc0 bus 0 target 1 lun 0
da1: <QUANTUM VIKING II 9.1WLS 5520> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da1: 8709MB (17836668 512 byte sectors: 255H 63S/T 1110C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST32151N 0590> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da0: 2049MB (4197405 512 byte sectors: 255H 63S/T 261C)
ffs_mountfs: superblock updated for soft updates
To Unsubscribe: send mail to majord...@freebsd.org
with "unsubscribe freebsd-current" in the body of the message
