Actually, I'm having the same problem with my Soundblaster ViBRA16X. It
seems that for some reason the sbc driver is not working right.
=================================================================
| Kenneth Culver | FreeBSD: The best OS around. |
| Unix Systems Administrator | ICQ #: 24767726 |
| and student at The | AIM: AgRSkaterq |
| The University of Maryland, | Website: (Under Construction) |
| College Park. | http://www.wam.umd.edu/~culverk/|
=================================================================
On Tue, 7 Dec 1999, Thomas Schuerger wrote:
> Hi!
>
> I am still having problems getting my AWE64 soundcard to
> work with the newpcm driver (the "old" pcm driver worked
> fine). I have updated the world last week and am using
> the kernel as of today. I'm using the "pcm0" and "sbc0"
> devices in my kernel options. My card is recognized
> correctly, but not attached to the pcm0 driver (it is
> listed as unknown0:), so all audio devices don't work.
>
> Any ideas what I am doing wrong? Are there more people
> having problems with their AWE64?
>
> Any help is appreciated!
>
>
>
> I have included my dmesg and pnpinfo outputs:
>
>
> Copyright (c) 1992-1999 The FreeBSD Project.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights reserved.
> FreeBSD 4.0-CURRENT #0: Tue Dec 7 18:26:28 CET 1999
> [EMAIL PROTECTED]:/usr/src/sys/compile/STARFIRE
> Timecounter "i8254" frequency 1193182 Hz
> CPU: Pentium II/Xeon/Celeron (412.05-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0x652 Stepping = 2
>
>Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
> real memory = 268423168 (262132K bytes)
> avail memory = 256204800 (250200K bytes)
> Programming 24 pins in IOAPIC #0
> FreeBSD/SMP: Multiprocessor motherboard
> cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
> cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
> io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
> Preloaded elf kernel "kernel" at 0xc03e6000.
> Preloaded userconfig_script "/kernel.config" at 0xc03e609c.
> Preloaded splash_image_data "/boot/starfire.bmp" at 0xc03e60e8.
> Preloaded elf module "splash_bmp.ko" at 0xc03e6138.
> Pentium Pro MTRR support enabled
> splash_bmp: No appropriate video mode found
> module_register_init: MOD_LOAD (splash_bmp, c03e1654, 0) error 19
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
> pci0: <PCI bus> on pcib0
> pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
> pci1: <PCI bus> on pcib1
> vga-pci0: <Matrox model 0521 graphics accelerator> irq 16 at device 0.0 on pci1
> isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
> isa0: <ISA bus> on isab0
> ata-pci0: <Intel PIIX4 IDE controller> at device 4.1 on pci0
> ata-pci0: Busmastering DMA supported
> ata0 at 0x01f0 irq 14 on ata-pci0
> ata1 at 0x0170 irq 15 on ata-pci0
> pci0: UHCI USB controller (vendor=0x8086, dev=0x7112) at 4.2 irq 19
> Timecounter "PIIX" frequency 3579545 Hz
> chip1: <Intel 82371AB Power management controller> at device 4.3 on pci0
> ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> irq 19 at device 6.0 on pci0
> ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
> pci0: unknown card (vendor=0x121a, dev=0x0002) at 9.0
> ed0: <NE2000 PCI Ethernet (Compex)> irq 18 at device 10.0 on pci0
> ed0: address 00:80:48:c4:b7:99, type NE2000 (16 bit)
> devclass_alloc_unit: npx0 already exists, using next available unit number
> isa0: unexpected tag 14
> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model Generic PS/2 mouse, device ID 0
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> sc0: <System console> on isa0
> sc0: VGA <16 virtual consoles, flags=0x200>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1 at port 0x2f8-0x2ff irq 3 on isa0
> sio1: type 16550A
> joy0 at port 0x201 on isa0
> ppc0 at port 0x378-0x37f irq 7 on isa0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/9 bytes threshold
> plip0: <PLIP network interface> on ppbus 0
> lpt0: <generic printer> on ppbus 0
> lpt0: Interrupt-driven port
> ppi0: <generic parallel i/o> on ppbus 0
> pps0: <Pulse per second Timing Interface> on ppbus 0
> unknown0: <Creative SB AWE64> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq
>1,5 on isa0
> joy1: <Generic PnP Joystick> at port 0x208-0x20f on isa0
> unknown1: <WaveTable> at port 0x620-0x623 on isa0
> APIC_IO: Testing 8254 interrupt delivery
> APIC_IO: routing 8254 via pin 2
> IP packet filtering initialized, divert enabled, rule-based forwarding disabled,
>default to accept, logging limited to 100 packets/entry by default
> IP Filter: initialized. Default = pass all, Logging = enabled
> IP Filter: v3.3.3
> SMP: AP CPU #1 Launched!
> ad0: <IBM-DPTA-372730/P78OA30A> ATA-4 disk at ata0 as master
> ad0: 26105MB (53464320 sectors), 53040 cyls, 16 heads, 63 S/T, 512 B/S
> ad0: 16 secs/int, 32 depth queue, UDMA33
> ad1: <IBM-DTTA-351010/T56OA73A> ATA-4 disk at ata1 as master
> ad1: 9671MB (19807200 sectors), 19650 cyls, 16 heads, 63 S/T, 512 B/S
> ad1: 16 secs/int, 32 depth queue, UDMA33
> ahc0:A:2: refuses WIDE negotiation. Using 8bit transfers
> ahc0:A:2: refuses WIDE negotiation. Using 8bit transfers
> ahc0:A:2: refuses WIDE negotiation. Using 8bit transfers
> ahc0:A:2: refuses WIDE negotiation. Using 8bit transfers
> ahc0:A:2: refuses WIDE negotiation. Using 8bit transfers
> ahc0:A:2: refuses WIDE negotiation. Using 8bit transfers
> ahc0:A:2: refuses WIDE negotiation. Using 8bit transfers
> ahc0:A:2: refuses WIDE negotiation. Using 8bit transfers
> Mounting root from ufs:/dev/da0s2a
> cd0 at ahc0 bus 0 target 2 lun 0
> cd0: <PIONEER CD-ROM DR-U16S 1.01> Removable CD-ROM SCSI-2 device
> cd0: 20.000MB/s transfers (20.000MHz, offset 16)
> cd0: Attempt to query device size failed: NOT READY, Medium not present
> da0 at ahc0 bus 0 target 8 lun 0
> da0: <IBM DDRS-34560W S97B> Fixed Direct Access SCSI-2 device
> da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
> da0: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C)
>
>
>
> pnpinfo:
>
> Checking for Plug-n-Play devices...
>
> Card assigned CSN #1
> Vendor ID CTL00c5 (0xc5008c0e), Serial Number 0x1ea37970
> PnP Version 1.0, Vendor Version 16
> Device Description: Creative SB AWE64 PnP
> *** Small Vendor Tag Detected
>
> Logical Device ID: CTL0045 0x45008c0e #0
> Device Description: Audio
> TAG Start DF
> Good Configuration
> IRQ: 5 - only one type (true/edge)
> DMA: channel(s) 1
> 8-bit, not a bus master, count by byte, , Compatibility mode
> DMA: channel(s) 5
> 16-bit, not a bus master, , count by word, Compatibility mode
> I/O Range 0x220 .. 0x220, alignment 0x1, len 0x10
> [16-bit addr]
> I/O Range 0x330 .. 0x330, alignment 0x1, len 0x2
> [16-bit addr]
> I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4
> [16-bit addr]
> TAG Start DF
> Acceptable Configuration
> IRQ: 5 7 9 10 - only one type (true/edge)
> DMA: channel(s) 0 1 3
> 8-bit, not a bus master, count by byte, , Compatibility mode
> DMA: channel(s) 5 6 7
> 16-bit, not a bus master, , count by word, Compatibility mode
> I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
> [16-bit addr]
> I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2
> [16-bit addr]
> I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4
> [16-bit addr]
> TAG Start DF
> Acceptable Configuration
> IRQ: 5 7 9 10 - only one type (true/edge)
> DMA: channel(s) 0 1 3
> 8-bit, not a bus master, count by byte, , Compatibility mode
> DMA: channel(s) 5 6 7
> 16-bit, not a bus master, , count by word, Compatibility mode
> I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
> [16-bit addr]
> I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2
> [16-bit addr]
> TAG Start DF
> Acceptable Configuration
> IRQ: 5 7 9 10 - only one type (true/edge)
> DMA: channel(s) 0 1 3
> 8-bit, not a bus master, count by byte, , Compatibility mode
> DMA: channel(s) 5 6 7
> 16-bit, not a bus master, , count by word, Compatibility mode
> I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
> [16-bit addr]
> TAG Start DF
> Acceptable Configuration
> IRQ: 5 7 9 10 - only one type (true/edge)
> DMA: channel(s) 0 1 3
> 8-bit, not a bus master, count by byte, , Compatibility mode
> I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
> [16-bit addr]
> I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2
> [16-bit addr]
> I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4
> [16-bit addr]
> TAG Start DF
> Acceptable Configuration
> IRQ: 5 7 9 10 - only one type (true/edge)
> DMA: channel(s) 0 1 3
> 8-bit, not a bus master, count by byte, , Compatibility mode
> I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
> [16-bit addr]
> I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2
> [16-bit addr]
> TAG Start DF
> Acceptable Configuration
> IRQ: 5 7 9 10 - only one type (true/edge)
> DMA: channel(s) 0 1 3
> 8-bit, not a bus master, count by byte, , Compatibility mode
> I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
> [16-bit addr]
> TAG Start DF
> Sub-optimal Configuration
> IRQ: 5 7 9 10 - only one type (true/edge)
> DMA: channel(s) 0 1 3
> 8-bit, not a bus master, count by byte, , Compatibility mode
> DMA: channel(s) 5 6 7
> 16-bit, not a bus master, , count by word, Compatibility mode
> I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
> [16-bit addr]
> I/O Range 0x300 .. 0x330, alignment 0x10, len 0x2
> [16-bit addr]
> I/O Range 0x388 .. 0x394, alignment 0x4, len 0x4
> [16-bit addr]
> TAG End DF
>
> Logical Device ID: CTL7002 0x02708c0e #1
> Compatible Device ID: PNPb02f (2fb0d041)
> Device Description: Game
> TAG Start DF
> Good Configuration
> I/O Range 0x200 .. 0x200, alignment 0x1, len 0x8
> [16-bit addr]
> TAG Start DF
> Acceptable Configuration
> I/O Range 0x200 .. 0x208, alignment 0x8, len 0x8
> [16-bit addr]
> TAG End DF
>
> Logical Device ID: CTL0022 0x22008c0e #2
> Device Description: WaveTable
> TAG Start DF
> Good Configuration
> I/O Range 0x620 .. 0x620, alignment 0x1, len 0x4
> [16-bit addr]
> TAG Start DF
> Acceptable Configuration
> I/O Range 0x620 .. 0x680, alignment 0x20, len 0x4
> [16-bit addr]
> TAG End DF
> *** Small Vendor Tag Detected
> End Tag
>
> Successfully got 69 resources, 3 logical fdevs
> -- card select # 0x0001
>
> CSN CTL00c5 (0xc5008c0e), Serial Number 0x1ea37970
>
> Logical device #0
> IO: 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220
> IRQ 5 0
> DMA 1 5
> IO range check 0x00 activate 0x01
>
> Logical device #1
> IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
> IRQ 0 0
> DMA 4 4
> IO range check 0x00 activate 0x01
>
> Logical device #2
> IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
> IRQ 0 0
> DMA 4 4
> IO range check 0x00 activate 0x01
>
>
>
> Ciao,
> Thomas Schürger. http://www.menden.augustin.de
>
>
>
> To Unsubscribe: send mail to [EMAIL PROTECTED]
> with "unsubscribe freebsd-current" in the body of the message
>
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
