Sorry, but I think READING THE MANUAL would really help! You want to set options eith the '-o' parameter, NOT the '-O' parameter (that would set the output file).
RalfD Am Montag, 14. Februar 2022 10:46 CET, Nikolay Shaplov <dh...@nataraj.su> schrieb: > В письме от понедельник, 14 февраля 2022 г. 00:11:19 MSK пользователь Marcus > Weseloh написал: > > > > that parameter ist for the alsa_sequencer backend to name the _fluidsynth_ > > > input port. > > That is correct. The --portname parameter sets the name of the > > sequencer port. To control which device to use for an alsa_raw driver, > > you need to specify the "midi.alsa.device" setting. E.g. > > > > fluidsynth .. -m alsa_raw -O "midi.alsa.device=hw:1,0,0" ... > > This does not work too: > > $ amidi -l > Dir Device Name > IO hw:1,0,0 Keystation MIDI 1 > > $ fluidsynth -a pulseaudio -m alsa_raw -g 10 -r 48000 -O > "midi.alsa.device=hw:1,0,0" /usr/share/sounds/sf3/default-GM.sf3 > [.....] > ALSA lib rawmidi_hw.c:235:(snd_rawmidi_hw_open) open /dev/snd/midiC0D0 > failed: No such file or directory > > > > -- > Nikolay Shaplov aka Nataraj > Fuzzing Engineer at Postgres Professional > Matrix IM: @dhyan:nataraj.su > > > -- Ralf Mattes Hochschule für Musik Freiburg Projektleitung HISinOne Schwarzwaldstr. 141, D-79102 Freiburg http://www.mh-freiburg.de _______________________________________________ fluid-dev mailing list fluid-dev@nongnu.org https://lists.nongnu.org/mailman/listinfo/fluid-dev
