On 07/31/2012 10:39 PM, Aere Greenway wrote:
David:
I performed the steps for retrieving and building the release-candidate
fluidsynth.
Thanks!
Though it complained that DOXYGEN (or something like that)
was not found, it seemed to build and install without any error.
The doxygen error can be ignored.
I can supply printouts of the entire process, if that would be helpful.
My testing also went well, since I did not discover any problems.
The problem I have in doing this testing, is that I have no way of
knowing if it used the libfluidsynth1 generated during the process, or
what I was using before (the repackaged version of your PPA for Ubuntu
11.10).
Try verifying by running these two commands:
1) "which fluidsynth", should return /usr/local/bin/fluidsynth
2) "ldd /usr/local/bin/fluidsynth | grep fluid", should return
"libfluidsynth.so.1 => /usr/local/lib/libfluidsynth.so.1" (followed by a
hex number).
If the second one fails, i e, points to somewhere in "/usr/lib" instead
of the newly installed file in "/usr/local/lib", try running "sudo
ldconfig", then try again.
Let me know how this goes.
// David
_______________________________________________
fluid-dev mailing list
fluid-dev@nongnu.org
https://lists.nongnu.org/mailman/listinfo/fluid-dev
