* BootUtil is not intended as a utility for LAN-On-Motherboard (LOM) implementations. Adjustments made to BootROM settings on LOM implementations may not affect how the adapter operates.
"And well this nic which i was trying to flash is a LOM. So i guess there will be no chance to flash it.
Cheers, Vadim On 06.03.2018 18:08, Alex Henderson wrote:
Vadim:
Usually programming the firmware ROMs for Intel NICs requires software
from Intel.
https://www.intel.com/content/www/us/en/support/articles/000005790/software/manageability-products.html
may do the trick.
Alex
-----Original Message-----
From: flashrom [mailto:[email protected]] On Behalf Of Vadim Bulst
Sent: Tuesday, March 6, 2018 12:51 AM
To: [email protected]
Subject: [flashrom] Flashing iPXE on Intel i210 on Supermicro X11SSL-F
Dear list,
I'm curious to know if it is possible to flash iPXE to these nics.
PCI-Id is listed in supported devices - 8086:1533 .
[root@urzospoc01 src]# flashrom -p nicintel_eeprom:pci=01:00.0 flashrom v1.0 on
Linux 3.10.0-693.17.1.el7.x86_64 (x86_64) flashrom is free software, get the
source code at https://flashrom.org
Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns).
Found Programmer flash chip "Opaque flash chip" (4 kB,
Programmer-specific) on nicintel_eeprom.
No operations were specified.
When i build a rom for this specific nic the file has a size of 70kB.
Is there a way to get this rom to the nics?
Cheers,
Vadim
--
Vadim Bulst
Universität Leipzig / URZ
04109 Leipzig, Augustusplatz 10
phone: +49-341-97-33380
mail: [email protected]
-- Vadim Bulst Universität Leipzig / URZ 04109 Leipzig, Augustusplatz 10 phone: +49-341-97-33380 mail: [email protected]
smime.p7s
Description: S/MIME Cryptographic Signature
_______________________________________________ flashrom mailing list [email protected] https://mail.coreboot.org/mailman/listinfo/flashrom
