Hello Vadim, On 06.03.2018 09:50, Vadim Bulst wrote: > Dear list, > > I'm curious to know if it is possible to flash iPXE to these nics. > PCI-Id is listed in supported devices - 8086:1533 . > > [root@urzospoc01 src]# flashrom -p nicintel_eeprom:pci=01:00.0 > flashrom v1.0 on Linux 3.10.0-693.17.1.el7.x86_64 (x86_64) > flashrom is free software, get the source code at https://flashrom.org > > Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). > Found Programmer flash chip "Opaque flash chip" (4 kB, > Programmer-specific) on nicintel_eeprom. > No operations were specified. > > When i build a rom for this specific nic the file has a size of 70kB. > > Is there a way to get this rom to the nics?
I don't know much about these NICs or flashrom's driver. But a quick look at the code shows that this 4KiB "Opaque flash chip" is actually an emulated EEPROM. 70KiB seem too large for an EEPROM anyway, did you try `-p nicintel_spi` as well? It should detect an SPI flash chip, if present. Nico _______________________________________________ flashrom mailing list [email protected] https://mail.coreboot.org/mailman/listinfo/flashrom
