Hi all:
The behaviour of option --image has changed between versions 0.9.9 and
1.0.0.
In the past, I wasn't specifying any --image, and flashrom just flashed
the one and only that I had defined in my layout file.
Now, flashrom just states that the chip content is identical, which is
not the case. This is the output:
--------8<--------8<--------8<--------
flashrom v1.0 on Windows 6.1 (x86)
flashrom is free software, get the source code at https://flashrom.org
Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6406E/MX25L6408E" (8192 kB, SPI) on
ft2232_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip...
Warning: Chip content is identical to the requested image.
Erase/write done.
--------8<--------8<--------8<--------
That is misleading. If the newer flashrom does not default to any image
(or maybe to all images?), and the user specifies a layout file but not
--image arguments, it should then fail with "no layout image specified"
or a similar error message.
Best regards,
rdiez
_______________________________________________
flashrom mailing list
[email protected]
https://mail.coreboot.org/mailman/listinfo/flashrom
