On Fri, Aug 15, 2025 at 08:16:12PM +0100, Carsten Haitzler wrote: > On Fri, 15 Aug 2025 08:33:02 -0700 Ross Vandegrift <[email protected]> said: > > On Thu, Aug 14, 2025 at 11:17:50PM +0100, Carsten Haitzler wrote: > > > On Thu, 14 Aug 2025 14:21:05 -0700 Ross Vandegrift <[email protected]> > > > said: > > > > > > > On Thu, Aug 14, 2025 at 07:27:15PM +0100, Carsten Haitzler wrote: > > > > > can you try enable "use command" in the screen setup config? it will > > > > > use the xrandr cmdline (if it exists) to do it as opposed to xrandr > > > > > protocol directly. but it seems the logic is doing the right thing. > > > > > > > > Thanks, it works. I compared RRR logs before and after, the only > > > > surprise I can pick out of the first log is: > > > > > > > > > RRR: 'DP-4' is relative to 'eDP-1' > > > > > > > > That seems weird since eDP-1 is unconfigured - but I don't know that > > > > it's wrong. > > > > > > ummm are you sure edp1 has NO config - you'd have nothing on screen when > > > the > > > lid is open then... ? > > > > This wasn't quite right: the xrandr position drop down showed > > Unconfigured. eet -d had reasonable looking config. Sure enough I > > tried starting undocked and nothing came up on the screen. > > why on earth would you leave that unconfigured... or well off... you would > want > it on... e will auto disable the screen as if its unplugged if the lid closes.
Lol, I didn't do it - Unconfigured isn't even a choice in the drop down. Ross _______________________________________________ enlightenment-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/enlightenment-users
