On Thu, Aug 14, 2025 at 11:17:50PM +0100, Carsten Haitzler wrote: > On Thu, 14 Aug 2025 14:21:05 -0700 Ross Vandegrift <[email protected]> said: > > > On Thu, Aug 14, 2025 at 07:27:15PM +0100, Carsten Haitzler wrote: > > > can you try enable "use command" in the screen setup config? it will use > > > the > > > xrandr cmdline (if it exists) to do it as opposed to xrandr protocol > > > directly. but it seems the logic is doing the right thing. > > > > Thanks, it works. I compared RRR logs before and after, the only > > surprise I can pick out of the first log is: > > > > > RRR: 'DP-4' is relative to 'eDP-1' > > > > That seems weird since eDP-1 is unconfigured - but I don't know that > > it's wrong. > > ummm are you sure edp1 has NO config - you'd have nothing on screen when the > lid is open then... ?
This wasn't quite right: the xrandr position drop down showed Unconfigured. eet -d had reasonable looking config. Sure enough I tried starting undocked and nothing came up on the screen. After rm .e/e/config/*/e_randr2* I got my screen back and was able to configure my monitors. After this, eDP-1 says None instead of Unconfigured. Roos _______________________________________________ enlightenment-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/enlightenment-users
