Kevin,
Check RFC15 on the bottom of the RF Board. You must check it with an
ohmmeter - even if it is open you will find 5 volts on both sides of it.
Should you find it open and do not have an immediate replacement, short
across it, replace the bottom cover and re-run CAL PLL - then check
again for the clicks.
73,
Don W3FPR
Kevin Shaw wrote:
My K2 has the "PLL Click" problem when I turn the VFO. I've tried running
CAL PLL with the covers on, but no luck.
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
