On Wed, 18 Jul 2007 15:45:32 -0400, Don Wilhelm wrote: >The way I use the APPs is to make up a short (6 inch) cable with >a connector on one end matching the equipment - that usually >stays with that piece of equipment, but I have spares for those >too. Then I make up a goodly number of extension cords with an >APP connector on each end.
>Chose the length to match your application - whether portable >or on the operating bench. The extension plugs into the >rigrunner and then goes to the equipment vicinity. I have >extension cords in 10g, 12g and 16g sizes and fuse the rigrunner >for the equipment on the far end (but never exceeding the cable >wire's capability). That's exactly the way that I do it and encourage others to do it except that I don't use a RigRunner but I do have the functional equivalent. -- 73 de K2ASP - Phil Kane Elecraft K2/100 s/n 5402 _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
