Just to elaborate on Sandy's point about 24v for those who don't know,
you can assemble a pair of APP connectors with one rotated 90 degrees,
or with them aligned vertically instead of horizontally, and they won't
fit with the standard 12v ham/ARES configuration, insuring safety.
I don't know if anyone has a standard 24v configuration, but even if
not, just making your 24v cable up differently means you can't do this.
The one thing you *can* do with APP is offset one from the other and
plug only the red of one into the black of the other, and if there is
some other ground path, you can lose. If the 12vdc pairing used had
used a 90 degree rotation this would be a lot harder to do, as you would
have to have the cables rotated *and* colors wrong when you plug them in
to cause his failure. As it is, colors wrong and offset by nearly 3/8
inch is a pretty good indicator, but it can happen in the dark.
73,
Leigh/WA5ZNU
On Wed, 18 Jul 2007 10:13 am, Sandy wrote:
It IS possible some "knucklehead" might plug a power source into a
power source which might be catastrophic if say one source was 24 volts
and the other 12 volts!
73,
Sandy W5TVW
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
