Hi
> -----Original Message-----
> From: Rob Herring [mailto:[email protected]]
> Sent: 2018年4月10日 4:04
> To: Jun Li <[email protected]>
> Cc: [email protected]; [email protected];
> [email protected]; [email protected]; [email protected]; Peter
> Chen <[email protected]>; [email protected];
> [email protected]; dl-linux-imx <[email protected]>;
> [email protected]
> Subject: Re: [PATCH v4 02/13] dt-bindings: usb: add documentation for typec
> port controller(TCPCI)
>
> On Thu, Mar 29, 2018 at 12:06:07AM +0800, Li Jun wrote:
> > TCPCI stands for typec port controller interface, its implementation
> > has full typec port control with power delivery support, it's a
> > standard i2c slave with GPIO input as irq interface, detail see spec
> > "Universal Serial Bus Type-C Port Controller Interface Specification
> > Revision 1.0, Version 1.1"
> >
> > Signed-off-by: Li Jun <[email protected]>
> > ---
> > .../devicetree/bindings/usb/typec-tcpci.txt | 33
> ++++++++++++++++++++++
> > 1 file changed, 33 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/usb/typec-tcpci.txt
> > b/Documentation/devicetree/bindings/usb/typec-tcpci.txt
> > new file mode 100644
> > index 0000000..7a7a8e0
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/usb/typec-tcpci.txt
> > @@ -0,0 +1,33 @@
> > +TCPCI(Typec port cotroller interface) binding
> > +---------------------------------------------
> > +
> > +Required properties:
> > +- compatible: should be "usb-tcpci,chip-specific-string".
>
> Compatible strings should be in the form of "<vendor prefix>,<device>"
>
OK, I will list the specific compatible string here and change
my example case to be "nxp,ptn5110".
> > +- reg: the i2c slave address of typec port controller device.
> > +- interrupt-parent: the phandle to the interrupt controller which provides
> > + the interrupt.
> > +- interrupts: interrupt specification for tcpci alert.
> > +
> > +Required sub-node:
> > +- connector: The "usb-c-connector" attached to the tcpci chip, the
> > +bindings
> > + of connector node are specified in
> > + Documentation/devicetree/bindings/connector/usb-connector.txt
> > +
> > +Example:
> > +
> > +ptn5110@50 {
> > + compatible = "usb-tcpci,ptn5110";
> > + reg = <0x50>;
> > + interrupt-parent = <&gpio3>;
> > + interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> > +
> > + usb_con: connector {
>
> How is the OF graph done in this case? You need some link to the USB
> controller.
The platform(i.MX8MQ EVK) for this is still on the way of start upstream, I was
Planning to add this part with enabling USB3 function, as of how this will be
done,
I only have usb3 ss data(no display port or Sideband), is something like below
OK?
typec: ptn5110@50 {
compatible = "nxp,ptn5110";
...
usb_con: connector {
compatible = "usb-c-connector";
label = "USB-C";
...
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
usb_con_ss: endpoint {
remote-endpoint = <&usb3_phy_ss>;
};
};
};
};
};
&usb3_phy0 {
status = "okay";
port {
usb3_phy_ss: endpoint {
remote-endpoint = <&usb_con_ss>;
};
};
}
Thanks
Jun
>
> > + compatible = "usb-c-connector";
> > + label = "USB-C";
> > + port-type = "dual";
> > + try-power-role = "sink"
> > + source-pdos = <0x380190c8>;
> > + sink-pdos = <0x380190c8 0x3802d0c8>;
> > + op-sink-microwatt-hours = <9000000>;
> > + };
> > +};
> > --
> > 2.7.4
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe devicetree"
> > in the body of a message to [email protected] More majordomo
> > info at
> > https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fvger
> > .kernel.org%2Fmajordomo-info.html&data=02%7C01%7Cjun.li%40nxp.com%7C
> 86
> >
> a7c0da18204df434d208d59e550c27%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0
> %
> >
> 7C0%7C636589010562193065&sdata=0%2FmoDrqWn9YghWGucWYnMd1YK0BO2
> dVgp%2Fa
> > KNZZZ%2BXE%3D&reserved=0
_______________________________________________
devel mailing list
[email protected]
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
