Hi
> -----Original Message-----
> From: Mats Karrman [mailto:[email protected]]
> Sent: 2018年3月30日 3:54
> To: Jun Li <[email protected]>; [email protected]; [email protected];
> [email protected]; [email protected]
> Cc: [email protected]; [email protected]; Peter Chen
> <[email protected]>; [email protected];
> [email protected]; dl-linux-imx <[email protected]>;
> [email protected]
> Subject: Re: [PATCH v4 01/13] dt-bindings: connector: add properties for typec
>
> Hi Li,
>
> On 03/28/2018 06:06 PM, Li Jun wrote:
>
> > Add bingdings supported by current typec driver, so user can pass all
> > those properties via dt.
> >
> > Signed-off-by: Li Jun <[email protected]>
> > ---
> > .../bindings/connector/usb-connector.txt | 39
> ++++++++++++++++++++++
> > 1 file changed, 39 insertions(+)
> >
> > diff --git
> > a/Documentation/devicetree/bindings/connector/usb-connector.txt
> > b/Documentation/devicetree/bindings/connector/usb-connector.txt
> > index e1463f1..922f22b 100644
> > --- a/Documentation/devicetree/bindings/connector/usb-connector.txt
> > +++ b/Documentation/devicetree/bindings/connector/usb-connector.txt
> > @@ -15,6 +15,29 @@ Optional properties:
> > - type: size of the connector, should be specified in case of USB-A, USB-B
> > non-fullsize connectors: "mini", "micro".
> >
> > +Optional properties for usb-c-connector:
> > +- power-type: should be one of "source", "sink" or "dual"(DRP) if
> > +typec
> > + connector has power support.
> > +- try-power-role: preferred power role if "dual"(DRP) can support
> > +Try.SNK
> > + or Try.SRC, should be "sink" for Try.SNK or "source" for Try.SRC.
> > +- data-type: should be one of "host", "device", "dual"(DRD) if typec
> > + connector supports USB data.
> > +
> > +Required properties for usb-c-connector with power delivery support:
> > +- source-pdos: An array of u32 with each entry providing supported
> > +power
> > + source data object(PDO), the detailed bit definitions of PDO can be
> > +found
> > + in "Universal Serial Bus Power Delivery Specification" chapter
> > +6.4.1.2
> > + Source_Capabilities Message, the order of each entry(PDO) should
> > +follow
> > + the PD spec chapter 6.4.1. Required for power source and power dual role.
> > +- sink-pdos: An array of u32 with each entry providing supported
> > +power
> > + sink data object(PDO), the detailed bit definitions of PDO can be
> > +found
> > + in "Universal Serial Bus Power Delivery Specification" chapter
> > +6.4.1.3
> > + Sink Capabilities Message, the order of each entry(PDO) should
> > +follow
> > + the PD spec chapter 6.4.1. Required for power sink and power dual role.
> > +- op-sink-microwatt-hours: Sink required operating power in micro
> > + watt-hours, if source offered power is less then it, Capability
> > +Mismatch
> > + is set, required for power sink and power dual role.
>
> This doesn't make sense. The unit of power is watt (W), watt-hour on the other
> hand is a measurement of energy. I think "op-sink-microwatt" is what we want
> here.
Yes, you are right, microwatt is what I should use here. I will change.
Li Jun
>
> // Mats
>
> > +
> > Required nodes:
> > - any data bus to the connector should be modeled using the OF graph
> bindings
> > specified in bindings/graph.txt, unless the bus is between parent
> > node and @@ -73,3 +96,19 @@ ccic: s2mm005@33 {
> > };
> > };
> > };
> > +
> > +3. USB-C connector attached to a typec port controller(ptn5110),
> > +which has power delivery support and enables drp.
> > +
> > +typec: ptn5110@50 {
> > + ...
> > + usb_con: connector {
> > + compatible = "usb-c-connector";
> > + label = "USB-C";
> > + power-type = "dual";
> > + try-power-role = "sink";
> > + source-pdos = <0x380190c8>;
> > + sink-pdos = <0x380190c8 0x3802d0c8>;
> > + op-sink-microwatt-hours = <9000000>;
> > + };
> > +};
> >
_______________________________________________
devel mailing list
[email protected]
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
