The ITE IT6263 based NXP LVDS to HDMI converter can be attached to the i.MX943 EVK board LVDS port using the mini-SAS connector. Since this is the default configuration for the EVK, add support for it here.
Signed-off-by: Laurentiu Palcu <[email protected]> --- arch/arm64/boot/dts/freescale/imx943-evk.dts | 86 ++++++++++++++++++++++++++++ 1 file changed, 86 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx943-evk.dts b/arch/arm64/boot/dts/freescale/imx943-evk.dts index c8ceabe3d9239..0b69450566159 100644 --- a/arch/arm64/boot/dts/freescale/imx943-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx943-evk.dts @@ -55,6 +55,36 @@ dmic: dmic { #sound-dai-cells = <0>; }; + hdmi-connector { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&it6263_out>; + }; + }; + }; + + reg_1v8_ext: regulator-1v8-ext { + compatible = "regulator-fixed"; + regulator-name = "1V8_EXT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3v3_ext: regulator-3v3-ext { + compatible = "regulator-fixed"; + regulator-name = "3V3_EXT"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + reg_m2_pwr: regulator-m2-pwr { compatible = "regulator-fixed"; regulator-name = "M.2-power"; @@ -179,6 +209,10 @@ memory@80000000 { }; }; +&dcif { + status = "okay"; +}; + &enetc1 { clocks = <&scmi_clk IMX94_CLK_MAC4>; clock-names = "ref"; @@ -217,6 +251,21 @@ &flexcan4 { status = "okay"; }; +&ldb { + assigned-clocks = <&scmi_clk IMX94_CLK_LDBPLL_VCO>, + <&scmi_clk IMX94_CLK_LDBPLL>; + assigned-clock-rates = <4158000000>, <1039500000>; + status = "okay"; + + ports { + port@1 { + lvds_out: endpoint { + remote-endpoint = <&it6263_in>; + }; + }; + }; +}; + &lpi2c3 { clock-frequency = <400000>; pinctrl-0 = <&pinctrl_lpi2c3>; @@ -258,6 +307,43 @@ i2c@3 { reg = <3>; #address-cells = <1>; #size-cells = <0>; + + lvds-to-hdmi-bridge@4c { + compatible = "ite,it6263"; + reg = <0x4c>; + data-mapping = "jeida-24"; + reset-gpios = <&pcal6416_i2c3_u171 8 GPIO_ACTIVE_HIGH>; + ivdd-supply = <®_1v8_ext>; + ovdd-supply = <®_3v3_ext>; + txavcc18-supply = <®_1v8_ext>; + txavcc33-supply = <®_3v3_ext>; + pvcc1-supply = <®_1v8_ext>; + pvcc2-supply = <®_1v8_ext>; + avcc-supply = <®_3v3_ext>; + anvdd-supply = <®_1v8_ext>; + apvdd-supply = <®_1v8_ext>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + it6263_in: endpoint { + remote-endpoint = <&lvds_out>; + }; + }; + + port@2 { + reg = <2>; + + it6263_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; }; i2c@4 { -- 2.51.0
