On Tue, Nov 18, 2025 at 11:29:45PM -0300, Fabio Estevam wrote: > Document the optional nxp,enable-termination-resistor property for the > i.MX LVDS display bridge. > > This boolean property indicates that the built-in 100 Ohm termination > resistor on the LVDS output is enabled. It is controlled via the HS_EN > bit in the LVDS_CTRL register. Enabling the resistor can improve LVDS > signal quality and may prevent visual artifacts on some boards, but > increases the power consumption. > > Signed-off-by: Fabio Estevam <[email protected]> > --- > Changes since v1: > - Change the property name to nxp,enable-termination-resistor (Frank).
Reviewed-by: Krzysztof Kozlowski <[email protected]> Best regards, Krzysztof
