Document the optional nxp,enable-termination-resistor property for the i.MX LVDS display bridge.
This boolean property indicates that the built-in 100 Ohm termination resistor on the LVDS output is enabled. It is controlled via the HS_EN bit in the LVDS_CTRL register. Enabling the resistor can improve LVDS signal quality and may prevent visual artifacts on some boards, but increases the power consumption. Signed-off-by: Fabio Estevam <[email protected]> --- Changes since v1: - Change the property name to nxp,enable-termination-resistor (Frank). .../devicetree/bindings/display/bridge/fsl,ldb.yaml | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml index 07388bf2b90d..6bc786204e65 100644 --- a/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml +++ b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml @@ -35,6 +35,15 @@ properties: - const: ldb - const: lvds + nxp,enable-termination-resistor: + type: boolean + description: + Indicates that the built-in 100 Ohm termination resistor on the LVDS + output is enabled. This property is optional and controlled via the + HS_EN bit in the LVDS_CTRL register. Enabling it can improve signal + quality and prevent visual artifacts on some boards, but increases + power consumption. + ports: $ref: /schemas/graph.yaml#/properties/ports -- 2.34.1
