When global alpha is enabled, per-pixel alpha is ignored. Allow
userspace to explicitly specify whether to use per-pixel alpha by
exposing it through the blend mode property. I'm not sure whether the
per-pixel alpha is pre-multiplied or not [1], but apparently it *must* be
pre-multiplied so I guess we have to advertise it.

[1] All we get is "The alpha value available with the graphics stream
    will define the transparency of the graphics."

Signed-off-by: Sean Anderson <[email protected]>
---

 drivers/gpu/drm/xlnx/zynqmp_kms.c | 24 ++++++++++++++++++++++--
 1 file changed, 22 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/xlnx/zynqmp_kms.c 
b/drivers/gpu/drm/xlnx/zynqmp_kms.c
index 456ada9ac003..fa1cfc16db36 100644
--- a/drivers/gpu/drm/xlnx/zynqmp_kms.c
+++ b/drivers/gpu/drm/xlnx/zynqmp_kms.c
@@ -61,6 +61,13 @@ static int zynqmp_dpsub_plane_atomic_check(struct drm_plane 
*plane,
        if (!new_plane_state->crtc)
                return 0;
 
+       if (new_plane_state->pixel_blend_mode != DRM_MODE_BLEND_PIXEL_NONE &&
+           new_plane_state->alpha >> 8 != 0xff) {
+               drm_dbg_kms(plane->dev,
+                           "Plane alpha must be 1.0 when using pixel alpha\n");
+               return -EINVAL;
+       }
+
        crtc_state = drm_atomic_get_crtc_state(state, new_plane_state->crtc);
        if (IS_ERR(crtc_state))
                return PTR_ERR(crtc_state);
@@ -117,9 +124,13 @@ static void zynqmp_dpsub_plane_atomic_update(struct 
drm_plane *plane,
 
        zynqmp_disp_layer_update(layer, new_state);
 
-       if (plane->index == ZYNQMP_DPSUB_LAYER_GFX)
-               zynqmp_disp_blend_set_global_alpha(dpsub->disp, true,
+       if (plane->index == ZYNQMP_DPSUB_LAYER_GFX) {
+               bool blend = plane->state->pixel_blend_mode ==
+                            DRM_MODE_BLEND_PIXEL_NONE;
+
+               zynqmp_disp_blend_set_global_alpha(dpsub->disp, blend,
                                                   plane->state->alpha >> 8);
+       }
 
        /*
         * Unconditionally enable the layer, as it may have been disabled
@@ -179,9 +190,18 @@ static int zynqmp_dpsub_create_planes(struct zynqmp_dpsub 
*dpsub)
                        return ret;
 
                if (i == ZYNQMP_DPSUB_LAYER_GFX) {
+                       unsigned int blend_modes =
+                               BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+                               BIT(DRM_MODE_BLEND_PREMULTI);
+
                        ret = drm_plane_create_alpha_property(plane);
                        if (ret)
                                return ret;
+
+                       ret = drm_plane_create_blend_mode_property(plane,
+                                                                  blend_modes);
+                       if (ret)
+                               return ret;
                }
        }
 
-- 
2.35.1.1320.gc452695387.dirty

Reply via email to