From: Yuanjie Yang <[email protected]> The Kaanapali MDSS has some differences compared to the SM8750 MDSS: - DSI PHY/DSI base address have some changes. - DPU 13.0: - SSPP layout has a great change. - interrupt INTF layout has some changes.
This patchset contains DSI PHY, DSI Controller, DPU & MDSS bindings in addition to the driver changes. We have already tested the display functionality using the Kaanapali-mtp device on the Kaanapali branch of kernel-qcom repository. Test command: "modetest -r -v" kernel-qcom repository: https://git.codelinaro.org/clo/linux-kernel/kernel-qcom/-/tree/kaanapali Signed-off-by: Yongxing Mou <[email protected]> Signed-off-by: Yuanjie Yang <[email protected]> --- Yuanjie Yang (12): drm/msm/dsi/phy: Add support for Kaanapali drm/msm/dpu: Add support for Kaanapali DPU drm/msm/dpu: Compatible with Kaanapali interrupt register drm/msm/mdss: Add support for Kaanapali drm/msm/dsi: Add support for Kaanapali drm/msm/dpu: Add Kaanapali SSPP sub-block support drm/panel: Set sufficient voltage for panel nt37801 arm64: defconfig: Enable NT37801 DSI panel driver dt-bindings: display/msm: qcom,kaanapali-dpu: Add Kaanapali dt-bindings: display/msm: dsi-phy-7nm: Add Kaanapali DSi PHY dt-bindings: display/msm: dsi-controller-main: Add Kaanapali dt-bindings: display/msm: qcom,kaanapali-mdss: Add Kaanapali .../display/msm/dsi-controller-main.yaml | 2 + .../bindings/display/msm/dsi-phy-7nm.yaml | 1 + .../display/msm/qcom,kaanapali-mdss.yaml | 298 +++++++++++ .../bindings/display/msm/qcom,sm8650-dpu.yaml | 1 + arch/arm64/configs/defconfig | 1 + .../disp/dpu1/catalog/dpu_13_0_kaanapali.h | 492 ++++++++++++++++++ .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 44 ++ .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 29 +- .../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c | 89 +++- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c | 474 ++++++++++++++++- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.c | 23 + drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h | 4 + drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 + drivers/gpu/drm/msm/dsi/dsi_cfg.c | 13 + drivers/gpu/drm/msm/dsi/dsi_cfg.h | 1 + drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 2 + drivers/gpu/drm/msm/dsi/phy/dsi_phy.h | 1 + drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 23 + drivers/gpu/drm/msm/msm_mdss.c | 22 + drivers/gpu/drm/panel/panel-novatek-nt37801.c | 5 + include/linux/soc/qcom/ubwc.h | 1 + 21 files changed, 1507 insertions(+), 20 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,kaanapali-mdss.yaml create mode 100644 drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_13_0_kaanapali.h -- 2.34.1
