From: Heiko Stuebner <[email protected]> The video-demo adapter also works on the Lion SoM when running on a Haikou baseboard, so add an overlay for it.
Signed-off-by: Heiko Stuebner <[email protected]> --- arch/arm64/boot/dts/rockchip/Makefile | 5 + .../rk3368-lion-haikou-video-demo.dtso | 174 ++++++++++++++++++ 2 files changed, 179 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3368-lion-haikou-video-demo.dtso diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index ad684e3831bc..494fdd685a5c 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -42,6 +42,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-lba3368.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-lion-haikou.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-lion-haikou-video-demo.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb @@ -231,6 +232,10 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou-haikou-video-demo.dtb px30-ringneck-haikou-haikou-video-demo-dtbs := px30-ringneck-haikou.dtb \ px30-ringneck-haikou-video-demo.dtbo +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-lion-haikou-haikou-video-demo.dtb +rk3368-lion-haikou-haikou-video-demo-dtbs := rk3368-lion-haikou.dtb \ + rk3368-lion-haikou-video-demo.dtbo + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou-haikou-video-demo.dtb rk3399-puma-haikou-haikou-video-demo-dtbs := rk3399-puma-haikou.dtb \ rk3399-puma-haikou-video-demo.dtbo diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou-video-demo.dtso b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou-video-demo.dtso new file mode 100644 index 000000000000..e7767c008144 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou-video-demo.dtso @@ -0,0 +1,174 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2025 Cherry Embedded Solutions GmbH + * + * DEVKIT ADDON CAM-TS-A01 + * https://embedded.cherry.de/product/development-kit/ + * + * DT-overlay for the camera / DSI demo appliance for Haikou boards. + * In the flavour for use with a Puma system-on-module. + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/clock/rk3368-cru.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> + +&{/} { + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <&dc_12v>; + pwms = <&pwm1 0 25000 0>; + }; + + cam_afvdd_2v8: regulator-cam-afvdd-2v8 { + compatible = "regulator-fixed"; + gpio = <&pca9670 2 GPIO_ACTIVE_LOW>; + regulator-max-microvolt = <2800000>; + regulator-min-microvolt = <2800000>; + regulator-name = "cam-afvdd-2v8"; + vin-supply = <&vcc2v8_video>; + }; + + cam_avdd_2v8: regulator-cam-avdd-2v8 { + compatible = "regulator-fixed"; + gpio = <&pca9670 4 GPIO_ACTIVE_LOW>; + regulator-max-microvolt = <2800000>; + regulator-min-microvolt = <2800000>; + regulator-name = "cam-avdd-2v8"; + vin-supply = <&vcc2v8_video>; + }; + + cam_dovdd_1v8: regulator-cam-dovdd-1v8 { + compatible = "regulator-fixed"; + gpio = <&pca9670 3 GPIO_ACTIVE_LOW>; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "cam-dovdd-1v8"; + vin-supply = <&vcc1v8_video>; + }; + + cam_dvdd_1v2: regulator-cam-dvdd-1v2 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&pca9670 5 GPIO_ACTIVE_HIGH>; + regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <1200000>; + regulator-name = "cam-dvdd-1v2"; + vin-supply = <&vcc3v3_baseboard>; + }; + + vcc1v8_video: regulator-vcc1v8-video { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vcc1v8-video"; + vin-supply = <&vcc3v3_baseboard>; + }; + + vcc2v8_video: regulator-vcc2v8-video { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <2800000>; + regulator-min-microvolt = <2800000>; + regulator-name = "vcc2v8-video"; + vin-supply = <&vcc3v3_baseboard>; + }; + + video-adapter-leds { + compatible = "gpio-leds"; + + video-adapter-led { + color = <LED_COLOR_ID_BLUE>; + gpios = <&pca9670 7 GPIO_ACTIVE_HIGH>; + label = "video-adapter-led"; + linux,default-trigger = "none"; + }; + }; +}; + +&dphy { + status = "okay"; +}; + +&i2c_gp2 { + #address-cells = <1>; + #size-cells = <0>; + /* OV5675, GT911, DW9714 are limited to 400KHz */ + clock-frequency = <400000>; + + touchscreen@14 { + compatible = "goodix,gt911"; + reg = <0x14>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PB5 IRQ_TYPE_LEVEL_LOW>; + irq-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&touch_int>; + pinctrl-names = "default"; + reset-gpios = <&pca9670 1 GPIO_ACTIVE_HIGH>; + AVDD28-supply = <&vcc2v8_video>; + VDDIO-supply = <&vcc3v3_baseboard>; + }; + + pca9670: gpio@27 { + compatible = "nxp,pca9670"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + pinctrl-0 = <&pca9670_resetn>; + pinctrl-names = "default"; + reset-gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>; + }; +}; + +&mipi_dsi { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + panel@0 { + compatible = "leadtek,ltk050h3148w"; + reg = <0>; + backlight = <&backlight>; + iovcc-supply = <&vcc1v8_video>; + reset-gpios = <&pca9670 0 GPIO_ACTIVE_LOW>; + vci-supply = <&vcc2v8_video>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; +}; + +&mipi_out { + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; +}; + +&pinctrl { + pca9670 { + pca9670_resetn: pca9670-resetn { + rockchip,pins = <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + touch { + touch_int: touch-int { + rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; \ No newline at end of file -- 2.47.2
