From: Xiangxu Yin <[email protected]> Add DP connector node and configure MDSS DisplayPort controller for QCS615 Ride platform. Include lane mapping and PHY supply settings to support DP output.
Signed-off-by: Xiangxu Yin <[email protected]> --- arch/arm64/boot/dts/qcom/qcs615-ride.dts | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts index 9ac1dd3483b56f9d1652f8a38f62d759efa92b6a..0b8bcabdd90a0820b1f9c85e43b78e40eb8a9a38 100644 --- a/arch/arm64/boot/dts/qcom/qcs615-ride.dts +++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts @@ -39,6 +39,20 @@ xo_board_clk: xo-board-clk { }; }; + dp0-connector { + compatible = "dp-connector"; + label = "DP0"; + type = "mini"; + + hpd-gpios = <&io_expander 8 GPIO_ACTIVE_HIGH>; + + port { + dp0_connector_in: endpoint { + remote-endpoint = <&mdss_dp0_out>; + }; + }; + }; + dp-dsi0-connector { compatible = "dp-connector"; label = "DSI0"; @@ -423,6 +437,16 @@ &mdss { status = "okay"; }; +&mdss_dp0 { + status = "okay"; +}; + +&mdss_dp0_out { + data-lanes = <3 2 0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000>; + remote-endpoint = <&dp0_connector_in>; +}; + &mdss_dsi0 { vdda-supply = <&vreg_l11a>; status = "okay"; @@ -623,6 +647,13 @@ &usb_qmpphy { status = "okay"; }; +&usb_qmpphy_2 { + vdda-phy-supply = <&vreg_l5a>; + vdda-pll-supply = <&vreg_l12a>; + + status = "okay"; +}; + &usb_1 { status = "okay"; }; -- 2.34.1
