The Northwest Logic MIPI DSI host controller embedded in i.MX8qxp works with a Mixel MIPI DPHY + LVDS PHY combo to support either a MIPI DSI display or a LVDS display. So, this patch calls phy_set_mode() from nwl_dsi_enable() to set PHY mode to MIPI DPHY explicitly.
Cc: Guido Günther <[email protected]> Cc: Robert Chiras <[email protected]> Cc: Martin Kepplinger <[email protected]> Cc: Andrzej Hajda <[email protected]> Cc: Neil Armstrong <[email protected]> Cc: Laurent Pinchart <[email protected]> Cc: Jonas Karlman <[email protected]> Cc: Jernej Skrabec <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: NXP Linux Team <[email protected]> Signed-off-by: Liu Ying <[email protected]> --- drivers/gpu/drm/bridge/nwl-dsi.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/bridge/nwl-dsi.c b/drivers/gpu/drm/bridge/nwl-dsi.c index 66b6740..be6bfc5 100644 --- a/drivers/gpu/drm/bridge/nwl-dsi.c +++ b/drivers/gpu/drm/bridge/nwl-dsi.c @@ -678,6 +678,12 @@ static int nwl_dsi_enable(struct nwl_dsi *dsi) return ret; } + ret = phy_set_mode(dsi->phy, PHY_MODE_MIPI_DPHY); + if (ret < 0) { + DRM_DEV_ERROR(dev, "Failed to set DSI phy mode: %d\n", ret); + goto uninit_phy; + } + ret = phy_configure(dsi->phy, phy_cfg); if (ret < 0) { DRM_DEV_ERROR(dev, "Failed to configure DSI phy: %d\n", ret); -- 2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
