RK3228/RK3328 can only support clock rates defined in the pre pll table. Lets validate the mode clock rate against the pre pll config and filter out any mode with a clock rate returning error from clk_round_rate().
Signed-off-by: Jonas Karlman <[email protected]> --- drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c index fae38b323a0c..45fcdce3f27f 100644 --- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c +++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c @@ -245,6 +245,22 @@ static void dw_hdmi_rockchip_encoder_disable(struct drm_encoder *encoder) { } +static enum drm_mode_status +dw_hdmi_rockchip_encoder_mode_valid(struct drm_encoder *encoder, + const struct drm_display_mode *mode) +{ + struct rockchip_hdmi *hdmi = to_rockchip_hdmi(encoder); + long rate; + + if (hdmi->vpll_clk) { + rate = clk_round_rate(hdmi->vpll_clk, mode->clock * 1000); + if (rate < 0) + return MODE_CLOCK_RANGE; + } + + return MODE_OK; +} + static bool dw_hdmi_rockchip_encoder_mode_fixup(struct drm_encoder *encoder, const struct drm_display_mode *mode, @@ -306,6 +322,7 @@ dw_hdmi_rockchip_encoder_atomic_check(struct drm_encoder *encoder, } static const struct drm_encoder_helper_funcs dw_hdmi_rockchip_encoder_helper_funcs = { + .mode_valid = dw_hdmi_rockchip_encoder_mode_valid, .mode_fixup = dw_hdmi_rockchip_encoder_mode_fixup, .mode_set = dw_hdmi_rockchip_encoder_mode_set, .enable = dw_hdmi_rockchip_encoder_enable, -- 2.17.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
